Connection falls using Suse 9.3
Hi all,
I have a Suse 9.3 in a dual boot computer with win xp. The installation has been successful. Only a quirk. Each time i log the Internet, the connection lasts 10 - 20 minutes and close and in Windows all works fine.
You know in my place ADSL hasn't been made avalaible unlike expensive sat dsl. And I log my ISP without set myself DNS WINS and other filters. In case it can be helpful my isp is Tele 2.
I'm actually using kinternet, but the problem lasts. This is the kinternet log:
------------------------------------------------------------------------------------------------
SuSE Meta pppd (smpppd-ifcfg), Version 1.58 on LocalMAXZ.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATZ
pppd[0]: ATZ
pppd[0]: OK
pppd[0]: --> Sending: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: AT Q0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
pppd[0]: OK
pppd[0]: --> Sending: ATM1
pppd[0]: ATM1
pppd[0]: OK
pppd[0]: --> Modem initialized.
pppd[0]: --> Sending: ATDT7020221022
pppd[0]: --> Waiting for carrier.
pppd[0]: ATDT7020221022
pppd[0]: CONNECT 115200
pppd[0]: --> Carrier detected. Waiting for prompt.
pppd[0]: ~[7f]}#@!}! } }8}"}&} }*} } }#}$@#}%}&[01][* }'}"}(}"g,~
pppd[0]: --> PPP negotiation detected.
pppd[0]: Serial connection established.
pppd[0]: Renamed interface ppp0 to modem0
pppd[0]: Using interface modem0
Status is: connecting
pppd[0]: Connect: modem0 <--> /dev/ttyS0
pppd[0]: PAP authentication succeeded
pppd[0]: local IP address 81.211.186.129
pppd[0]: remote IP address 212.151.128.89
pppd[0]: Script /etc/ppp/ip-up finished (pid 8707), status = 0x0
Status is: connected
pppd[0]: Terminating connection due to lack of activity.
The connection was idle and shut down.
Status is: disconnecting
pppd[0]: Connect time 15.6 minutes.
pppd[0]: Sent 54528 bytes, received 157877 bytes.
pppd[0]: Connection terminated.
pppd[0]: Hangup (SIGHUP)
Status is: disconnected
pppd[0] died: pppd received a signal (exit code 5)
----------------------------------------------------------------------
I hope you understand better than me the problem.
My modem is a Creative Modem Blaster V92 serial 56k.
Thanks in advance,
Enrico Dini
Firenze
|