LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 10-03-2007, 01:07 PM   #16
farslayer
LQ Guru
 
Registered: Oct 2005
Location: Northeast Ohio
Distribution: linuxdebian
Posts: 7,248
Blog Entries: 5

Rep: Reputation: 191Reputation: 191

I would use lshw -businfo Much easier to follow

Code:
it-etch:~# lshw -businfo
Bus info        Device     Class       Description
==================================================
                           system      OptiPlex 320
                           bus         0MH651
                           memory      BIOS
cpu@0                      processor   Intel(R) Pentium(R) D CPU 2.80GHz
                           memory      L1 cache
                           memory      L2 cache
                           processor   Logical CPU
                           processor   Logical CPU
                           memory      System Memory
                           memory      KHU006-QIA
                           memory      DIMM DDR Synchronous 533 MHz (1.9 ns) [empty]
pci@00:00.0                bridge      Radeon Xpress 200 Host Bridge
pci@00:01.0                bridge      RS480 PCI Bridge
pci@01:05.0                display     RC410 [Radeon Xpress 200]
pci@00:12.0     scsi0      storage     SB600 Non-Raid-5 SATA
scsi@0:0.0.0    /dev/sda   disk        Hitachi HDS72161
scsi@0:0.0.0,1  /dev/sda1  disk        Linux filesystem partition
scsi@0:0.0.0,2  /dev/sda2  disk        Extended partition
                /dev/sda5  disk        Linux swap / Solaris partition
                /dev/sda6  disk        Linux filesystem partition
pci@00:13.0                bus         SB600 USB (OHCI0)
usb@1           usb1       bus         OHCI Host Controller
pci@00:13.1                bus         SB600 USB (OHCI1)
usb@2           usb2       bus         OHCI Host Controller
usb@2:1                    bus         USB hub
usb@2:1.1                  input       Dell USB Keyboard
pci@00:13.2                bus         SB600 USB (OHCI2)
usb@3           usb3       bus         OHCI Host Controller
pci@00:13.3                bus         SB600 USB (OHCI3)
usb@4           usb4       bus         OHCI Host Controller
pci@00:13.4                bus         SB600 USB (OHCI4)
usb@5           usb5       bus         OHCI Host Controller
pci@00:13.5                bus         SB600 USB Controller (EHCI)
usb@6           usb6       bus         EHCI Host Controller
usb@6:7         scsi4      storage     Flash Disk
scsi@4:0.0.0    /dev/sdb   disk        Flash Disk
                /dev/sdb   disk
                /dev/sdb1  disk        FAT16 partition
pci@00:14.0                bus         SB600 SMBus
pci@00:14.1                storage     SB600 IDE
ide@0           ide0       bus         IDE Channel 0
ide@0.0         /dev/hda   disk        PHILIPS DVD+/-RW DVD8801
                /dev/hda   disk
pci@00:14.2                multimedia  SB600 Azalia
pci@00:14.3                bridge      SB600 PCI to LPC Bridge
pci@00:14.4                bridge      SB600 PCI to PCI Bridge
pci@02:09.0     eth0       network     BCM4401-B0 100Base-TX
So what does your output show for that command ?
 
Old 10-04-2007, 04:19 PM   #17
defa0009
Member
 
Registered: Jun 2003
Posts: 185

Original Poster
Rep: Reputation: 31
Quote:
Originally Posted by michaelk View Post
The command lsmod show loaded modules. You can load the libata module via the command:
modprobe libata
I ran the command: modprobe libata and then ran lsmod... here is the output.



Module Size Used by
autofs4 23749 2
hidp 23105 2
rfcomm 42457 0
l2cap 29633 10 hidp,rfcomm
bluetooth 53925 5 hidp,rfcomm,l2cap
sunrpc 142973 1
ip_conntrack_ftp 11697 0
ip_conntrack_netbios_ns 6977 0
ipt_REJECT 9537 1
xt_state 6209 9
ip_conntrack 53153 3 ip_conntrack_ftp,ip_conntrack_netbios_ns,xt_state
nfnetlink 10713 1 ip_conntrack
iptable_filter 7105 1
ip_tables 17029 1 iptable_filter
ip6t_REJECT 9409 1
xt_tcpudp 7105 24
ip6table_filter 6848 1
ip6_tables 18181 1 ip6table_filter
x_tables 17349 6 ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables
video 19269 0
sbs 18533 0
i2c_ec 9025 1 sbs
i2c_core 23745 1 i2c_ec
button 10705 0
battery 13637 0
asus_acpi 19289 0
ac 9157 0
ipv6 250369 17 ip6t_REJECT
lp 15849 0
floppy 57125 0
sg 35933 0
sata_via 14149 0
libata 96985 1 sata_via
e1000 116433 0
intel_rng 9537 0
e7xxx_edac 9921 0
parport_pc 29157 1
edac_mc 24977 1 e7xxx_edac
parport 37513 2 lp,parport_pc
pcspkr 7105 0
serio_raw 10693 0
dm_snapshot 20581 0
dm_zero 6209 0
dm_mirror 29713 0
dm_mod 56537 8 dm_snapshot,dm_zero,dm_mirror
qla1280 119757 0
mptspi 20041 0
mptscsih 25921 1 mptspi
scsi_transport_spi 26177 1 mptspi
mptbase 52833 2 mptspi,mptscsih
megaraid_mbox 33745 2
sd_mod 22977 3
scsi_mod 130637 8 sg,libata,qla1280,mptspi,mptscsih,scsi_transport_spi,megaraid_mbox,sd_mod
megaraid_mm 14689 1 megaraid_mbox
ext3 123081 2
jbd 56553 1 ext3
ehci_hcd 32845 0
ohci_hcd 23261 0
uhci_hcd 25421 0
 
Old 10-04-2007, 04:21 PM   #18
defa0009
Member
 
Registered: Jun 2003
Posts: 185

Original Poster
Rep: Reputation: 31
Quote:
Originally Posted by farslayer View Post
I would use lshw -businfo Much easier to follow

So what does your output show for that command ?

Command not found....


[root@CentOS5 ~]# lshw -businfo
bash: lshw: command not found
 
Old 10-04-2007, 04:25 PM   #19
defa0009
Member
 
Registered: Jun 2003
Posts: 185

Original Poster
Rep: Reputation: 31
Quote:
Originally Posted by michaelk View Post
After you load the libata module check the output of the dmesg command to see if the drive is being recognized.

Here is the output of dmesg after loading libata.....


Linux version 2.6.18-8.1.14.el5 (mockbuild@builder7.centos.org) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Thu Sep 27 18:58:54 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable)
BIOS-e820: 000000007ffe0000 - 000000007ffefc00 (ACPI data)
BIOS-e820: 000000007ffefc00 - 000000007ffff000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 524256
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 294880 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 DELL ) @ 0x000fdc20
ACPI: RSDT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdc34
ACPI: FADT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdc64
ACPI: MADT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdcd8
ACPI: SPCR (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdd96
ACPI: DSDT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec81000] gsi_base[72])
IOAPIC[2]: apic_id 10, version 32, address 0xfec81000, GSI 72-95
ACPI: IOAPIC (id[0x0b] address[0xfec82000] gsi_base[120])
IOAPIC[3]: apic_id 11, version 32, address 0xfec82000, GSI 120-143
ACPI: IOAPIC (id[0x0c] address[0xfec82800] gsi_base[144])
IOAPIC[4]: apic_id 12, version 32, address 0xfec82800, GSI 144-167
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7ffff000:7ec01000)
Detected 2791.074 MHz processor.
Built 1 zonelists. Total pages: 524256
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec80000)
mapped IOAPIC to ffffa000 (fec81000)
mapped IOAPIC to ffff9000 (fec82000)
mapped IOAPIC to ffff8000 (fec82800)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0737000 soft=c0717000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2072272k/2097024k available (2043k kernel code, 23576k reserved, 846k data, 232k init, 1179520k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5584.51 BogoMIPS (lpj=2792256)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0738000 soft=c0718000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5581.19 BogoMIPS (lpj=2790599)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
Total of 2 processors activated (11165.71 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
migration_cost=219
checking if image is initramfs... it is
Freeing initrd memory: 2349k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc6ce, last bus=13
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:05:04.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.P2PB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.P2PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.P2PD._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.P2PE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.P2PE.ZION._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.P2PF._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *11 12 14)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 *5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 *11 12 14)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 11 12 14)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 11 12 14) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0b: ioport range 0x800-0x87f could not be reserved
pnp: 00:0b: ioport range 0x880-0x8bf has been reserved
pnp: 00:0b: ioport range 0x8c0-0x8df has been reserved
pnp: 00:0b: ioport range 0xc00-0xc1f has been reserved
pnp: 00:0b: ioport range 0xca2-0xca7 has been reserved
pnp: 00:0b: ioport range 0xc20-0xc2f has been reserved
PCI: Bridge: 0000:01:1d.0
IO window: e000-efff
MEM window: fe400000-fe4fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:01:1f.0
IO window: d000-dfff
MEM window: fe200000-fe3fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: d000-efff
MEM window: fe000000-fe4fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:04:1d.0
IO window: c000-cfff
MEM window: fde00000-fdffffff
PREFETCH window: f0000000-f7ffffff
PCI: Bridge: 0000:07:00.0
IO window: disabled.
MEM window: fdd00000-fddfffff
PREFETCH window: e8000000-efffffff
PCI: Bridge: 0000:06:03.0
IO window: b000-bfff
MEM window: fdb00000-fddfffff
PREFETCH window: e8000000-efffffff
PCI: Bridge: 0000:04:1f.0
IO window: b000-bfff
MEM window: fda00000-fddfffff
PREFETCH window: e8000000-efffffff
PCI: Bridge: 0000:00:03.0
IO window: b000-cfff
MEM window: fd800000-fdffffff
PREFETCH window: e8000000-f7ffffff
PCI: Bridge: 0000:0a:08.0
IO window: a000-afff
MEM window: fd600000-fd7fffff
PREFETCH window: e7000000-e70fffff
PCI: Bridge: 0000:09:1d.0
IO window: a000-afff
MEM window: fd500000-fd7fffff
PREFETCH window: e7000000-e7ffffff
PCI: Bridge: 0000:09:1f.0
IO window: 9000-9fff
MEM window: fd300000-fd4fffff
PREFETCH window: d8000000-dfffffff
PCI: Bridge: 0000:00:04.0
IO window: 9000-afff
MEM window: fd100000-fd7fffff
PREFETCH window: d8000000-e7ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 8000-8fff
MEM window: fb000000-fcffffff
PREFETCH window: 80000000-800fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1191532383.904:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9D84EDE83706E02F
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x4
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: Unable to derive IRQ for device 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcio, hddio
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 232k freed
Write protecting the kernel read-only data: 383k
input: AT Translated Set 2 keyboard as /class/input/input0
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 169, io base 0x00007ce0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
SCSI subsystem initialized
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megaraid: probe new device 0x101e:0x1960:0x1028:0x0493: bus 8:slot 0:func 0
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 80 (level, low) -> IRQ 177
megaraid: fw version:[1.92] bios version:[3.31]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.1
Type: Processor ANSI SCSI revision: 02
scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
scsi[0]: scanning scsi channel 2 [virtual] for logical drives
Vendor: MegaRAID Model: LD 0 RAID0 139G Rev: 1.92
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 286220288 512-byte hdwr sectors (146545 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 286220288 512-byte hdwr sectors (146545 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2
sd 0:2:0:0: Attached scsi disk sda
Fusion MPT base driver 3.04.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.02
ACPI: PCI Interrupt 0000:0b:0d.0[A] -> GSI 120 (level, low) -> IRQ 185
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
scsi1 : ioc0: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=185
ACPI: PCI Interrupt 0000:0b:0d.1[B] -> GSI 121 (level, low) -> IRQ 193
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
scsi2 : ioc1: LSI53C1030, FwRev=01013d00h, Ports=1, MaxQ=255, IRQ=193
qla1280: Skipping AMI SubSys Vendor ID Chip
device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1191532405.396:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1587 types, 172 bools, 1 sens, 1024 cats
security: 59 classes, 49762 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1191532405.663:3): policy loaded auid=4294967295
input: PC Speaker as /class/input/input2
EDAC MC: Ver: 2.0.1 Sep 27 2007
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
EDAC e7xxx: error reporting device not found:vendor 8086 device 0x2541 (broken BIOS?)
Intel 82802 RNG detected
Intel(R) PRO/1000 Network Driver - version 7.2.7-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 28 (level, low) -> IRQ 201
e1000: 0000:03:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:0b:db:92:ef:28
libata version 2.00 loaded.
scsi 0:0:6:0: Attached scsi generic sg0 type 3
sd 0:2:0:0: Attached scsi generic sg1 type 0
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
sata_via 0000:02:02.0: version 2.0
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 24 (level, low) -> IRQ 209
sata_via 0000:02:02.0: routed to hard irq line 5
ata1: SATA max UDMA/133 cmd 0xECF0 ctl 0xECFA bmdma 0xEC60 irq 209
ata2: SATA max UDMA/133 cmd 0xECD0 ctl 0xECDA bmdma 0xEC68 irq 209
scsi3 : sata_via
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ata1: SATA link down (SStatus 0 SControl 310)
ATA: abnormal status 0x7F on port 0xECF7
scsi4 : sata_via
ata2: SATA link down (SStatus 0 SControl 310)
ATA: abnormal status 0x7F on port 0xECD7
lp0: using parport0 (interrupt-driven).
lp0: console ready
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
microcode: CPU0 updated from revision 0xf to 0x2d, date = 08112004
microcode: CPU1 updated from revision 0xf to 0x2d, date = 08112004
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit(1191532426.415:4): audit_pid=1944 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
 
Old 10-04-2007, 05:37 PM   #20
michaelk
Moderator
 
Registered: Aug 2002
Posts: 21,611

Rep: Reputation: 4169Reputation: 4169Reputation: 4169Reputation: 4169Reputation: 4169Reputation: 4169Reputation: 4169Reputation: 4169Reputation: 4169Reputation: 4169Reputation: 4169
The modules are loading and both SATA ports are being recognized but the IDE isn't. As previously posted if you are not running at least 2.6.20 you might need to patch the kernel

http://www.viaarena.com/Driver/via%2...note%20v0.8.gz
http://www.mail-archive.com/linux-id.../msg02258.html

BTW have you thought about connecting the drive to the built in IDE controller?

Last edited by michaelk; 10-04-2007 at 05:43 PM.
 
Old 10-04-2007, 10:28 PM   #21
farslayer
LQ Guru
 
Registered: Oct 2005
Location: Northeast Ohio
Distribution: linuxdebian
Posts: 7,248
Blog Entries: 5

Rep: Reputation: 191Reputation: 191
Quote:
Originally Posted by defa0009 View Post
Command not found....


[root@CentOS5 ~]# lshw -businfo
bash: lshw: command not found
That would indicate you need to install lshw first, in order to use it....

yum install lshw maybe ? not real familiar with RHEL/CentOS but it should be something along those lines.
 
Old 10-09-2007, 05:48 AM   #22
defa0009
Member
 
Registered: Jun 2003
Posts: 185

Original Poster
Rep: Reputation: 31
Quote:
Originally Posted by michaelk View Post
BTW have you thought about connecting the drive to the built in IDE controller?
I didn't see it on the board... I'll check it out again.
 
Old 12-19-2007, 07:37 PM   #23
defa0009
Member
 
Registered: Jun 2003
Posts: 185

Original Poster
Rep: Reputation: 31
UPDATE:

I re-installed CentOS 5 and now I get mention of the DVD/ROM
when I run the dmesg command.


Probing IDE interface ide0...
hda: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive


Still not sure how I get the drive to auto mount when I put
a disc in the drive?
 
Old 12-19-2007, 09:25 PM   #24
jay73
LQ Guru
 
Registered: Nov 2006
Location: Belgium
Distribution: Ubuntu 11.04, Debian testing
Posts: 5,019

Rep: Reputation: 133Reputation: 133
Have you had a look at System > Preferences > Hardware > Removable Drives and Media if you are using GNOME?
 
Old 12-21-2007, 12:22 PM   #25
defa0009
Member
 
Registered: Jun 2003
Posts: 185

Original Poster
Rep: Reputation: 31
I re-booted and now it shows up just where you said jay73!

Thanks.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Booting FC3 DVD from a DVD on a PCI IDE Controller FewynMorisato Linux - Newbie 20 01-23-2005 07:38 PM
hpt372 ide controller and on-the-fly ide removeing captgoodnight Linux - Hardware 0 01-25-2004 12:38 AM
Enabled SCSI-IDE and Can't Access DVD-ROM Campy19 Mandriva 2 01-12-2004 11:20 PM
bad dmesg output when using ide-scsi boot parameter for IDE CD/DVD-ROM Locura Slackware 7 09-29-2003 02:36 AM
how to add cd-rom, dvd-rom, floppy, hard disk icons on gnome desktop? spyghost Linux - Software 6 09-21-2003 05:44 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 02:03 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration