LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 04-14-2008, 12:49 PM   #1
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Rep: Reputation: 18
configuring eSata PCI card and Lacie 2big Dual external hard drive


Hi

I am out of my depth here. I have a new lacie eSata PCI card and a Lacie 2big Dual external hard drive and I don't know how I can mount the new drive. The drive can run in raid-0 (the factory default) or raid-1 mode. I have followed the simple steps to set it to raid1. The PCI card is inserted in my Dell Precission 470 running Debian Etch and the external drive is connected via the eSata cable and is angrily flashing it's enormously large led which dominates the front and the smaller led's at the back red-blue-red-blue...

Here's some information

dell-1 /home/dave # lspci
00:00.0 Host bridge: Intel Corporation E7525 Memory Controller Hub (rev 09)
00:00.1 Class ff00: Intel Corporation E7525/E7520 Error Reporting Registers (rev 09)
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 09)
00:03.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A1 (rev 09)
00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 09)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A
01:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B
03:0d.0 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID (rev 10)
03:0d.1 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID (rev 10)
03:0e.0 Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 04)
05:00.0 VGA compatible controller: nVidia Corporation NV41 [Quadro FX 3450/4000 SDI] (rev a2)
06:0d.0 SATA controller: Initio Corporation INI-1623 PCI SATA-II Controller (rev 02)

I am not sure about that last entry whether it means my new PCI card or whether it means the motherboards onboard sata controller. I suspect the later because it is there even if I cut the power to the external drive.

The kernel...

dave@dell-1: home/dave$ uname -r
2.6.15.4-custom

the customised stuff was done by someone much stronger in Linux than myself about two years ago. I am now the administrator of this machine, but I'm really green when it comes to kernel stuff.

some more info

dave@dell-1: home/dave$ dmesg
Bootdata ok (command line is root=/dev/sdb2 ro )
Linux version 2.6.15.4-custom (root@dell-1) (gcc version 4.0.3 20060212 (prerelease) (Debian 4.0.2-9)) #2 SMP Wed Mar 1 12:10:58 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bfe8ac00 (usable)
BIOS-e820: 00000000bfe8ac00 - 00000000bfe8cc00 (ACPI NVS)
BIOS-e820: 00000000bfe8cc00 - 00000000bfe8ec00 (ACPI data)
BIOS-e820: 00000000bfe8ec00 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
ACPI: RSDP (v000 DELL ) @ 0x00000000000febf0
ACPI: RSDT (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000000fcb51
ACPI: FADT (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000000fcbb5
ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000fffc77ae
ACPI: MADT (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000000fcc29
ACPI: BOOT (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000000fccd3
ACPI: ASF! (v016 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000000fccfb
ACPI: MCFG (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000000fcd62
ACPI: HPET (v001 DELL WS 470 0x00000007 ASL 0x00000061) @ 0x00000000000fcda0
ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x0000000000000000
On node 0 totalpages: 1012986
DMA zone: 2904 pages, LIFO batch:0
DMA32 zone: 767682 pages, LIFO batch:31
Normal zone: 242400 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48])
IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
Checking aperture...
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists
Kernel command line: root=/dev/sdb2 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 14.318180 MHz HPET timer.
time.c: Detected 3391.837 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Placing software IO TLB between 0x5b73000 - 0x9b73000
Memory: 3976992k/5177344k available (2280k kernel code, 149584k reserved, 1068k data, 164k init)
Calibrating delay using timer specific routine.. 6789.32 BogoMIPS (lpj=13578656)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
mtrr: v2.0 (20020519)
Using local APIC timer interrupts.
Detected 12.469 MHz APIC timer.
Booting processor 1/2 APIC 0x6
Initializing CPU#1
Calibrating delay using timer specific routine.. 6783.72 BogoMIPS (lpj=13567446)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.40GHz stepping 03
APIC error on CPU1: 00(40)
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 1343 cycles)
Brought up 2 CPUs
time.c: Using HPET/TSC based timekeeping.
testing NMI watchdog ... OK.
checking if image is initramfs... it is
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:05:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
pnp: 00:00: ioport range 0x800-0x85f could not be reserved
pnp: 00:00: ioport range 0xc00-0xc7f has been reserved
pnp: 00:00: ioport range 0x860-0x8ff could not be reserved
PCI: Bridge: 0000:01:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:01:00.2
IO window: c000-dfff
MEM window: dfd00000-dfefffff
PREFETCH window: d0000000-d00fffff
PCI: Bridge: 0000:00:02.0
IO window: c000-dfff
MEM window: dfd00000-dfefffff
PREFETCH window: d0000000-d00fffff
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: dfc00000-dfcfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: dd000000-dfbfffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1e.0
IO window: a000-bfff
MEM window: dce00000-dcffffff
PREFETCH window: d0100000-d01fffff
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:01:00.0 to 64
PCI: Setting latency timer of device 0000:01:00.2 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Simple Boot Flag at 0x7a set to 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
Intel E7520/7320/7525 detected.<6>Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
netconsole: not configured, aborting
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 49 (level, low) -> IRQ 177
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

Vendor: MAXTOR Model: ATLAS15K2_73WLS Rev: JNZM
Type: Direct-Access ANSI SCSI revision: 03
target0:0:0: asynchronous.
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
target0:0:0: Beginning Domain Validation
target0:0:0: wide asynchronous.
target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI (6.25 ns, offset 127)
target0:0:0: Ending Domain Validation
Vendor: MAXTOR Model: ATLAS15K2_73WLS Rev: JNZM
Type: Direct-Access ANSI SCSI revision: 03
target0:0:1: asynchronous.
scsi0:A:1:0: Tagged Queuing enabled. Depth 32
target0:0:1: Beginning Domain Validation
target0:0:1: wide asynchronous.
target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI (6.25 ns, offset 127)
target0:0:1: Ending Domain Validation
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:03:0d.1[B] -> GSI 50 (level, low) -> IRQ 185
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

Fusion MPT base driver 3.03.04
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.04
mice: PS/2 mouse device common for all mice
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
Intel 810 + AC97 Audio, version 1.01, 12:09:49 Mar 1 2006
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH5 found at IO 0xe8c0 and 0xec00, MEM 0xdffffa00 and 0xdffff900, IRQ 193
i810: Intel ICH5 mmio at 0xffffc20000010a00 and 0xffffc20000012900
input: AT Translated Set 2 keyboard as /class/input/input0
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Analog Devices AD1981B)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
ACPI wakeup devices:
VBTN PCI0 PCI1 PCI2 PCI3 PCI4 PCI5 PCI6 KBD USB0 USB1 USB2 USB3
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 164k freed
NET: Registered protocol family 1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000ff80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2
Copyright (c) 1999-2005 Intel Corporation.
SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 143374650 512-byte hdwr sectors (73408 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
sd 0:0:1:0: Attached scsi disk sdb
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000ff60
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 209, io base 0x0000ff40
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000ff20
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: irq 217, io mem 0xffa80800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
GSI 23 sharing vector 0xE1 and IRQ 23
ACPI: PCI Interrupt 0000:03:0e.0[A] -> GSI 48 (level, low) -> IRQ 225
libata version 1.20 loaded.
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 209
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddMA
Probing IDE interface ide1...
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
hdc: GCR-8485B, ATAPI CD/DVD-ROM drive
usb 5-5: new high speed USB device using ehci_hcd and address 2
hub 5-5:1.0: USB hub found
hub 5-5:1.0: 4 ports detected
hdd: SONY CD-RW/DVD-ROM CRX310EE, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ata_piix 0000:00:1f.2: version 1.05
ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 209
ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 209
ata1: SATA port has no device.
scsi2 : ata_piix
ata2: SATA port has no device.
scsi3 : ata_piix
Probing IDE interface ide0...
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 4-1: new low speed USB device using uhci_hcd and address 2
hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
input: HID 413c:3010 as /class/input/input1
input: USB HID v1.10 Mouse [HID 413c:3010] on usb-0000:00:1d.3-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
hw_random: RNG not detected
Floppy drive(s): fd0 is 1.44M
Real Time Clock Driver v1.12
FDC 0 is a post-1991 82077
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Adding 1951888k swap on /dev/sdb3. Priority:-1 extents:1 across:1951888k
EXT3 FS on sdb2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hw_random: RNG not detected
e1000: eth0: e1000_watchdog_task: NIC Link is Up 10 Mbps Half Duplex
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [VBTN]
NET: Registered protocol family 17
device eth0 entered promiscuous mode
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
usb 5-5.3: new high speed USB device using ehci_hcd and address 5
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
isa bounce pool size: 16 pages
Vendor: SONY Model: WALKMAN Rev: 0100
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sdc: 971008 2048-byte hdwr sectors (1989 MB)
sdc: Write Protect is off
sdc: Mode Sense: 3e 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 971008 2048-byte hdwr sectors (1989 MB)
sdc: Write Protect is off
sdc: Mode Sense: 3e 00 00 00
sdc: assuming drive cache: write through
sdc: sdc1
sd 4:0:0:0: Attached scsi removable disk sdc
usb-storage: device scan complete

also

dell-1 /home/dave # tail /var/log/messages
Apr 14 19:04:50 dell-1 kernel: isa bounce pool size: 16 pages
Apr 14 19:04:50 dell-1 kernel: Vendor: SONY Model: WALKMAN Rev: 0100
Apr 14 19:04:50 dell-1 kernel: Type: Direct-Access ANSI SCSI revision: 04
Apr 14 19:04:50 dell-1 kernel: SCSI device sdc: 971008 2048-byte hdwr sectors (1989 MB)
Apr 14 19:04:50 dell-1 kernel: sdc: Write Protect is off
Apr 14 19:04:50 dell-1 kernel: SCSI device sdc: 971008 2048-byte hdwr sectors (1989 MB)
Apr 14 19:04:50 dell-1 kernel: sdc: Write Protect is off
Apr 14 19:04:50 dell-1 kernel: sdc: sdc1
Apr 14 19:04:50 dell-1 kernel: sd 4:0:0:0: Attached scsi removable disk sdc
Apr 14 19:30:12 dell-1 -- MARK --

the following returns nothing

cat /var/log/Xorg.0.log|grep SATA

all hints and tips gratefully recieved.
FN

Last edited by Flailing_Novice; 04-14-2008 at 12:52 PM.
 
Old 04-15-2008, 03:54 AM   #2
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
I've ran a simple test. I ran "lspci > with" and "lspci > without" with and without the PCI card installed respectively and then ran

$ diff with without
23d22
< 06:0d.0 SATA controller: Initio Corporation INI-1623 PCI SATA-II Controller (rev 02)

a small but hopefully useful step. So I need now to identify the device so I can mount it to some directory right. Hmmm, how to find the device?

FN
 
Old 04-15-2008, 04:37 AM   #3
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
I've tried connecting via USB too. The LEDs still flash, the LED for the left drive flashes metronomically each half second, the LED for the right drive flutters irratically and faster.

Running the following gave

$ lsusb -v|

Bus 005 Device 006: ID 059f:1009 LaCie, Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x059f LaCie, Ltd
idProduct 0x1009
bcdDevice 0.62
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1

Even better,

$ fdisk -l

Disk /dev/sda: 73.4 GB, 73407820800 bytes
255 heads, 63 sectors/track, 8924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 8 64228+ 6 FAT16
/dev/sda2 9 8923 71609737+ f W95 Ext'd (LBA)
/dev/sda5 9 8923 71609706 7 HPFS/NTFS

Disk /dev/sdb: 73.4 GB, 73407820800 bytes
255 heads, 63 sectors/track, 8924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 61 489951 83 Linux
/dev/sdb2 62 1277 9767520 83 Linux
/dev/sdb3 1278 1520 1951897+ 82 Linux swap / Solaris
/dev/sdb4 1521 8924 59472630 5 Extended
/dev/sdb5 1521 8924 59472598+ 83 Linux

Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdc1 1 243202 1953520033+ 7 HPFS/NTFS


Bingo!!! we're gonna be mounting /dev/sdc. So I made myslef the directory /media/usb_lacie and ran

dell-1 /media # mount /dev/sdc usb_lacie/
mount: you must specify the filesystem type
dell-1 /media # mount -t auto /dev/sdc usb_lacie/
mount: you must specify the filesystem type
dell-1 /media # mount -t ntfs /dev/sdc usb_lacie/
mount: unknown filesystem type 'ntfs'
dell-1 /media # mount -t hpfs/ntfs /dev/sdc usb_lacie/
mount: unknown filesystem type 'hpfs/ntfs'
dell-1 /media # mount -t hpfs /dev/sdc usb_lacie/
mount: unknown filesystem type 'hpfs'

Hmmmm. Is this an ntfs issue? It seems a good idea to format the drive and replace ntfs with a linux file system, but I guess we have to mount it first, right?

Last edited by Flailing_Novice; 04-15-2008 at 04:47 AM.
 
Old 04-15-2008, 04:54 AM   #4
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
ouch, bad typo. That should have been

# mount /dev/sdc1 usb_lacie

well, including the "1" didn't change much anyway, same error messages are coming up.
 
Old 04-15-2008, 05:05 AM   #5
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
By the way, just for the record I do have ntfs stuff installed.

# dpkg -l|grep ntfs
ii libntfs-dev 1.13.1-6+b2 library that provides common NTFS access functions (development
ii libntfs8 1.12.1-1 library that provides common NTFS access functions
ii libntfs9 1.13.1-6+b2 library that provides common NTFS access functions
ii ntfsdoc 0.5-1 documentation about NTFS partitions format
ii ntfsprogs 1.13.1-6+b2 tools for doing neat things in NTFS partitions from Linux
ii ntfstools 1.12.1-1 transitional package to install ntfsprogs
 
Old 04-15-2008, 07:18 AM   #6
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
So I tried ntfsmount, but again no luck.

dell-1 /home/dave # ntfsmount -o ro /dev/sdc1 /media/usb_lacie
Failed to startup volume : Invalid argument
Couldn't mount device '/dev/sdc1' : Invalid argument
Mount failed

ntfs is also not listed in /proc/filesystems. Does that mean I have to do a kernel update to get ntfs working so I can mount the drive, delete the ntfs partition, set it up with a linux partition and then format it. Is the kernel update really nessacery here? I would really appreciate some help here before I #### up my system.

Last edited by Flailing_Novice; 04-15-2008 at 07:21 AM.
 
Old 04-15-2008, 07:28 AM   #7
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
Well, no that doesn't make sense, I already got this line in my /etc/fstab

# Added to mount windows partition
/dev/sda5 /mnt/windows_partition ntfs umask=022,user,auto 0 0

so lets try adding

# USB Lacie External Drive
/dev/sdc1 /media/usb_lacie ntfs umask=022,user,auto 0 0

Does it look OK to you guys?

Here goes for a reboot (come on, there must be a better way than a reboot right, if this was emacs I would M-x load-file). Anyway, reboot here we come.

Last edited by Flailing_Novice; 04-15-2008 at 07:30 AM.
 
Old 04-15-2008, 08:19 AM   #8
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
Just an update. I plugged the lacie drive into a windows machine via USB and when I tried accessing the drive it said it had not been formatted. So I let windows do a fast format and wrote a small text file to it, unmounted and contected it to my Debian box. mount still doesn't work but fdisk is now letting me perform partitioning tasks. By the way the Lacie is now in fast raid-0 mode. Ultimately I was raid-1, but I don't get the flashing LEDs in fast mode. If I can setup a linux partition in fast mode it will be a start at least.
 
Old 04-15-2008, 08:30 AM   #9
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
OK, we got ourselves a linux partition on the lacie now, wholla wholla!!!

But there is something strange, check this out.

dell-1 /media # fdisk -l

Disk /dev/sda: 73.4 GB, 73407820800 bytes
255 heads, 63 sectors/track, 8924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 8 64228+ 6 FAT16
/dev/sda2 9 8923 71609737+ f W95 Ext'd (LBA)
/dev/sda5 9 8923 71609706 7 HPFS/NTFS

Disk /dev/sdb: 73.4 GB, 73407820800 bytes
255 heads, 63 sectors/track, 8924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 61 489951 83 Linux
/dev/sdb2 62 1277 9767520 83 Linux
/dev/sdb3 1278 1520 1951897+ 82 Linux swap / Solaris
/dev/sdb4 1521 8924 59472630 5 Extended
/dev/sdb5 1521 8924 59472598+ 83 Linux

Disk /dev/sdc: 2000.4 GB, 2000409772032 bytes
255 heads, 63 sectors/track, 243202 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdc1 1 243202 1953520033+ 83 Linux
dell-1 /media # mount /dev/sdc1 usb_lacie
mount: unknown filesystem type 'ntfs'

Any ideas why mount is returning this error when we no longer have an ntfs partition?
 
Old 04-15-2008, 09:16 AM   #10
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
Quote:
Originally Posted by Flailing_Novice View Post
Well, no that doesn't make sense, I already got this line in my /etc/fstab

# Added to mount windows partition
/dev/sda5 /mnt/windows_partition ntfs umask=022,user,auto 0 0

so lets try adding

# USB Lacie External Drive
/dev/sdc1 /media/usb_lacie ntfs umask=022,user,auto 0 0

Does it look OK to you guys?

Here goes for a reboot (come on, there must be a better way than a reboot right, if this was emacs I would M-x load-file). Anyway, reboot here we come.

Dear Flailing Novice. I am impressed by your determination in the face of adversity, but I suggest you read the fstab page at wikipedia http://en.wikipedia.org/wiki/Fstab
 
Old 04-15-2008, 09:17 AM   #11
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
Quote:
Originally Posted by Flailing_Novice View Post
Dear Flailing Novice. I am impressed by your determination in the face of adversity, but I suggest you read the fstab page at wikipedia http://en.wikipedia.org/wiki/Fstab
Oh gee, thanks Flailing Novice. Now I know I can use

mount -a

instead of doing a reboot each time I edit fstab. You rock dude!!
 
Old 04-15-2008, 10:34 AM   #12
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
Smile

Hey Flailing Novice, try getting that drive into ext3 format. I reckommend the gparted GUI as an easy approach for newbies like you. Check this page out

http://www.mattcutts.com/blog/format...ive-for-linux/

I've not used it, but e2label looks cool too (same URL)

good luck
 
Old 04-15-2008, 11:19 AM   #13
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
Quote:
Originally Posted by Flailing_Novice View Post
Hey Flailing Novice, try getting that drive into ext3 format. I reckommend the gparted GUI as an easy approach for newbies like you. Check this page out

http://www.mattcutts.com/blog/format...ive-for-linux/

I've not used it, but e2label looks cool too (same URL)
Hey, nice tip. I had been struggling to convert to ext3. Now my fstab looks like this

dell-1 /media # cat /etc/fstab |grep -v ^#
proc /proc proc defaults 0 0
/dev/sdb2 / ext3 defaults,errors=remount-ro 0 1
/dev/sdb1 /boot ext2 defaults 0 2
/dev/sdb5 /home ext3 defaults 0 2
/dev/sdb3 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/hdd /media/cdrom1 iso9660 ro,user,noauto 0 0

/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0

/dev/sdc1 /media/usb_1 auto rw,user,noauto 0 0
/dev/sdd1 /media/usb_2 auto rw,user,noauto 0 0


/home /var/chroot/etch-ia32/home none bind 0 0
/tmp /var/chroot/etch-ia32/tmp none bind 0 0
/proc /var/chroot/etch-ia32/proc none bind 0 0


and fdisk -l gives


dell-1 /media # fdisk -l

Disk /dev/sda: 73.4 GB, 73407820800 bytes
255 heads, 63 sectors/track, 8924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 * 1 8 64228+ 6 FAT16
/dev/sda2 9 8923 71609737+ f W95 Ext'd (LBA)
/dev/sda5 9 8923 71609706 7 HPFS/NTFS

Disk /dev/sdb: 73.4 GB, 73407820800 bytes
255 heads, 63 sectors/track, 8924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 61 489951 83 Linux
/dev/sdb2 62 1277 9767520 83 Linux
/dev/sdb3 1278 1520 1951897+ 82 Linux swap / Solaris
/dev/sdb4 1521 8924 59472630 5 Extended
/dev/sdb5 1521 8924 59472598+ 83 Linux

Disk /dev/sdc: 2000.4 GB, 2000409772032 bytes
255 heads, 63 sectors/track, 243202 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdc1 1 243202 1953520033+ fd Linux raid autodetect


I found "mount" is very useful to see what is mounted, "mount -a" is useful for mounting everything in fstab, and "df -h" is nice to get the file infos.

Now let's get our hands dirty and switch the lacie drive to raid-1...
 
Old 04-15-2008, 11:51 AM   #14
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
Quote:
Originally Posted by Flailing_Novice View Post

Now let's get our hands dirty and switch the lacie drive to raid-1...

Oh wow, judging from this thread I'm gonna have to be a bit patient with respect to getting going with raid-1.

http://ubuntuforums.org/archive/index.php/t-597330.html

I had no idea changing the raid setting could be so, we'll let's say, an opportunity to go for a beer.
 
Old 04-17-2008, 03:37 AM   #15
Flailing_Novice
Member
 
Registered: Jul 2007
Distribution: Debian Etch AMD64
Posts: 48

Original Poster
Rep: Reputation: 18
Quote:
Originally Posted by Flailing_Novice View Post
Oh wow, judging from this thread I'm gonna have to be a bit patient with respect to getting going with raid-1.

http://ubuntuforums.org/archive/index.php/t-597330.html

I had no idea changing the raid setting could be so, we'll let's say, an opportunity to go for a beer.
OK, we got raid-1 set up and usable in USB mode. Now let address the real question, how to connect to this thing via my PCI esata card.

My mobo is...

dell-1 /home/dave # dmidecode -t 2
# dmidecode 2.8
SMBIOS 2.3 present.

Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0XC838
Version:
Serial Number: ..CN137405CO013A.

The good news is lspci shows the PCI card to be pressent. The badnews is fdisk -l does not show the external drive to connected. What am I missing in my configuration, a driver?
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
To buy or not to buy? LaCie 2Big storage network drive. Flailing_Novice Linux - Hardware 5 02-17-2011 06:46 AM
LaCie 500 usb external hard drive sheine Linux - Hardware 13 03-06-2008 01:45 PM
Problems with Lacie external hard drive deanw8 Linux - Hardware 1 04-05-2007 11:07 AM
eSATA hd using an eSATA PCI card on SuSE possible? aldimeneira Linux - Hardware 0 06-01-2006 01:15 PM
advice PCI eSATA card Chris594 Linux - Hardware 3 01-16-2006 12:34 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 01:23 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration