LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   configure SiS 330 series (vendor ID 6330) in XFree86 4.3.0 (https://www.linuxquestions.org/questions/linux-hardware-18/configure-sis-330-series-vendor-id-6330-in-xfree86-4-3-0-a-200278/)

hcgernhardt 07-02-2004 07:22 AM

configure SiS 330 series (vendor ID 6330) in XFree86 4.3.0
 
Folks---

I understand that SiS has had issues with the linux community for quite some time. I also found the website that describes the SiS series of drivers for XFree86 4.4, however I didn't quite follow how I was supposed to install/use the drivers. Changing XF86Config to use the 4.3 SiS driver causes the server to not be able to find the display.

My setup: Slackware 9.1, custom-compiled 2.6.7 kernel with all video and audio drivers compiled in, support for SiS frambuffer devices 300 and 315/330 activated, XFree86 4.3.0.

The quick question: Does anyone know of or have a howto for configuring SiS330 series, and its associated 3D accelleration capabilities, with XFree86 4.3? Do I need to upgrade to XFree86 4.4, or to X.org 6.7?

lspci and dmesg outputs follow. /var/log/XFree86.0.log on next post.

Thanks,

Henry

lspci output:
Code:

00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0741 (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS]: Unknown device 0003
00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0963 (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem] (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] SiS7002 USB 2.0
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 90)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]: Unknown device 6330


dmesg output:
Code:

Linux version 2.6.7 (root@bean) (gcc version 3.2.3) #4 Sun Jun 27 19:42:14 EDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
 BIOS-e820: 000000000bff0000 - 000000000bff8000 (ACPI data)
 BIOS-e820: 000000000bff8000 - 000000000c000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
191MB LOWMEM available.
On node 0 totalpages: 49136
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 45040 pages, LIFO batch:10
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI                                      ) @ 0x000faa60
ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x0bff0000
ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x0bff0030
ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x0bff00c0
ACPI: DSDT (v001    SiS      746 0x00000100 MSFT 0x0100000d) @ 0x00000000
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
CPU 0 irqstacks, hard=c050d000 soft=c050c000
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1817.988 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 189992k/196544k available (2860k kernel code, 5928k reserved, 1084k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3596.28 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:    After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:    After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:    After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2200+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
sisfb: Video ROM found and mapped to c00c0000
sisfb: Framebuffer at 0xc0000000, mapped to 0xcc80b000, size 65536k
sisfb: MMIO at 0xcfee0000, mapped to 0xd080c000, size 128k
sisfb: Memory heap starting at 64512K
sisfb: Using MMIO queue mode
sisfb: CRT1 DDC supported
sisfb: CRT1 DDC level: 2
sisfb: Monitor range H 30-54KHz, V 50-90Hz, Max. dotclock 60MHz
sisfb: Default mode is 800x600x8 (60Hz)
sisfb: Initial vbflags 0x0
sisfb: Added MTRRs
sisfb: Installed SISFB_GET_INFO ioctl (80046ef8)
sisfb: Installed SISFB_GET_VBRSTATUS ioctl (80046ef9)
sisfb: 2D acceleration is enabled, scrolling mode ypan (auto-max)
fb0: SIS 741 frame buffer device, Version 1.6.25
sisfb: (C) 2001-2004 Thomas Winischhofer.
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1088751623.4294965713:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 100x37
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected SiS 741 chipset
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: AGP aperture is 64M @ 0xd0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
sis900.c: v1.08.07 11/02/2003
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xcc00, IRQ 10, 00:0b:6a:45:f3:dc.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD400EB-00JEF0, ATA DISK drive
hdb: 16X52X32X52COMBO, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
 hda: hda1 hda2 hda3
hdb: ATAPI 52X DVD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ehci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.2: irq 11, pci mem d0843000
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:03.2
ehci_hcd 0000:00:03.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 10, pci mem d0845000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
ohci_hcd 0000:00:03.1: irq 10, pci mem d0847000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v2.2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
intel8x0_measure_ac97_clock: measured 49427 usecs
intel8x0: clocking to 48000
ALSA device list:
  #0: SiS SI7012 at 0xdc00, irq 10
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
ip_conntrack version 2.1 (1535 buckets, 12280 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
PM: Reading pmdisk image.
PM: Resume from disk failed.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 385552k swap on /dev/hda3.  Priority:-1 extents:1
eth0: Media Link On 100mbps full-duplex
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
cdrom: This disc doesn't have any tracks I recognize!


hcgernhardt 07-02-2004 07:23 AM

contents of /var/log/XFree86.0.log:
Code:

XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.22 i686 [ELF]
Build Date: 16 September 2003
        Before reporting problems, check http://www.XFree86.Org/
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Jul  2 07:00:59 2004
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |  |-->Monitor "My Monitor"
(**) |  |-->Device "VESA Framebuffer"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
        XFree86 ANSI C Emulation: 0.2
        XFree86 Video Driver: 0.6
        XFree86 XInput driver : 0.4
        XFree86 Server Extension : 0.2
        XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80002008, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0741 card 1849,0741 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1039,0003 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0963 card 0000,0000 rev 25 class 06,01,00 hdr 80
(II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1849,5513 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:6: chip 1039,7013 card 1849,9739 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1849,7012 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1849,7001 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1849,7001 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7002 card 1849,7002 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1849,0900 rev 90 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1039,6330 card 1849,6331 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
        [0] -1        0        0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
        [0] -1        0        0xcfd00000 - 0xcfefffff (0x200000) MX[B]
(II) Bus 1 prefetchable memory range:
        [0] -1        0        0xbfa00000 - 0xcfbfffff (0x10200000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] unknown chipset (0x6330) rev 0, Mem @ 0xc0000000/27, 0xcfee0000/17, I/O @ 0xac00/7
(II) Addressable bus resource ranges are
        [0] -1        0        0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1        0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd3ffffff to 0xcfffffff
(II) Active PCI resource ranges:
        [0] -1        0        0xcfff8000 - 0xcfff8fff (0x1000) MX[B]
        [1] -1        0        0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
        [2] -1        0        0xcfffa000 - 0xcfffafff (0x1000) MX[B]
        [3] -1        0        0xcfff9000 - 0xcfff9fff (0x1000) MX[B]
        [4] -1        0        0xd0000000 - 0xcfffffff (0x0) MX[B]O
        [5] -1        0        0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
        [6] -1        0        0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
        [7] -1        0        0x0000cc00 - 0x0000ccff (0x100) IX[B]
        [8] -1        0        0x0000d800 - 0x0000d87f (0x80) IX[B]
        [9] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX[B]
        [10] -1        0        0x0000d000 - 0x0000d07f (0x80) IX[B]
        [11] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[B]
        [12] -1        0        0x0000ff00 - 0x0000ff0f (0x10) IX[B]
        [13] -1        0        0x00000c00 - 0x00000c1f (0x20) IX[B]
        [14] -1        0        0x0000ac00 - 0x0000ac7f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
        [0] -1        0        0xcfff8000 - 0xcfff8fff (0x1000) MX[B]
        [1] -1        0        0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
        [2] -1        0        0xcfffa000 - 0xcfffafff (0x1000) MX[B]
        [3] -1        0        0xcfff9000 - 0xcfff9fff (0x1000) MX[B]
        [4] -1        0        0xd0000000 - 0xcfffffff (0x0) MX[B]O
        [5] -1        0        0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
        [6] -1        0        0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
        [7] -1        0        0x0000cc00 - 0x0000ccff (0x100) IX[B]
        [8] -1        0        0x0000d800 - 0x0000d87f (0x80) IX[B]
        [9] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX[B]
        [10] -1        0        0x0000d000 - 0x0000d07f (0x80) IX[B]
        [11] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[B]
        [12] -1        0        0x0000ff00 - 0x0000ff0f (0x10) IX[B]
        [13] -1        0        0x00000c00 - 0x00000c1f (0x20) IX[B]
        [14] -1        0        0x0000ac00 - 0x0000ac7f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0xcfff8000 - 0xcfff8fff (0x1000) MX[B]
        [6] -1        0        0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
        [7] -1        0        0xcfffa000 - 0xcfffafff (0x1000) MX[B]
        [8] -1        0        0xcfff9000 - 0xcfff9fff (0x1000) MX[B]
        [9] -1        0        0xd0000000 - 0xcfffffff (0x0) MX[B]O
        [10] -1        0        0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
        [11] -1        0        0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
        [12] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [13] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [14] -1        0        0x0000cc00 - 0x0000ccff (0x100) IX[B]
        [15] -1        0        0x0000d800 - 0x0000d87f (0x80) IX[B]
        [16] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX[B]
        [17] -1        0        0x0000d000 - 0x0000d07f (0x80) IX[B]
        [18] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[B]
        [19] -1        0        0x0000ff00 - 0x0000ff0f (0x10) IX[B]
        [20] -1        0        0x00000c00 - 0x00000c1f (0x20) IX[B]
        [21] -1        0        0x0000ac00 - 0x0000ac7f (0x80) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.2
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.4
[...font loads...]
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "vesa"
(II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        Module class: XFree86 XInput Driver
        ABI class: XFree86 XInput driver, version 0.4
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0xcfff8000 - 0xcfff8fff (0x1000) MX[B]
        [6] -1        0        0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
        [7] -1        0        0xcfffa000 - 0xcfffafff (0x1000) MX[B]
        [8] -1        0        0xcfff9000 - 0xcfff9fff (0x1000) MX[B]
        [9] -1        0        0xd0000000 - 0xcfffffff (0x0) MX[B]O
        [10] -1        0        0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
        [11] -1        0        0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
        [12] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [13] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [14] -1        0        0x0000cc00 - 0x0000ccff (0x100) IX[B]
        [15] -1        0        0x0000d800 - 0x0000d87f (0x80) IX[B]
        [16] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX[B]
        [17] -1        0        0x0000d000 - 0x0000d07f (0x80) IX[B]
        [18] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[B]
        [19] -1        0        0x0000ff00 - 0x0000ff0f (0x10) IX[B]
        [20] -1        0        0x00000c00 - 0x00000c1f (0x20) IX[B]
        [21] -1        0        0x0000ac00 - 0x0000ac7f (0x80) IX[B](B)
(II) resource ranges after probing:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0xcfff8000 - 0xcfff8fff (0x1000) MX[B]
        [6] -1        0        0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
        [7] -1        0        0xcfffa000 - 0xcfffafff (0x1000) MX[B]
        [8] -1        0        0xcfff9000 - 0xcfff9fff (0x1000) MX[B]
        [9] -1        0        0xd0000000 - 0xcfffffff (0x0) MX[B]O
        [10] -1        0        0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
        [11] -1        0        0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
        [12] 0        0        0x000a0000 - 0x000affff (0x10000) MS[B]
        [13] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [14] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[B]
        [15] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [16] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [17] -1        0        0x0000cc00 - 0x0000ccff (0x100) IX[B]
        [18] -1        0        0x0000d800 - 0x0000d87f (0x80) IX[B]
        [19] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX[B]
        [20] -1        0        0x0000d000 - 0x0000d07f (0x80) IX[B]
        [21] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[B]
        [22] -1        0        0x0000ff00 - 0x0000ff0f (0x10) IX[B]
        [23] -1        0        0x00000c00 - 0x00000c1f (0x20) IX[B]
        [24] -1        0        0x0000ac00 - 0x0000ac7f (0x80) IX[B](B)
        [25] 0        0        0x000003b0 - 0x000003bb (0xc) IS[B]
        [26] 0        0        0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 65472 kB
(II) VESA(0): VESA VBE OEM: SiS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor:
(II) VESA(0): VESA VBE OEM Product:
(II) VESA(0): VESA VBE OEM Product Rev:
(**) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read successfully
(II) VESA(0): Manufacturer: PBN  Model: 5234  Serial#: 7
(II) VESA(0): Year: 1997  Week: 25
(II) VESA(0): EDID Version: 1.1
(II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) VESA(0): Sync:  Separate
(II) VESA(0): Max H-Image Size [cm]: horiz.: 27  vert.: 20
(II) VESA(0): Gamma: 2.80
(II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) VESA(0): redX: 0.625 redY: 0.340  greenX: 0.310 greenY: 0.592
(II) VESA(0): blueX: 0.150 blueY: 0.065  whiteX: 0.281 whiteY: 0.311
(II) VESA(0): Supported VESA Video Modes:
(II) VESA(0): 720x400@70Hz
(II) VESA(0): 640x480@60Hz
(II) VESA(0): 640x480@72Hz
(II) VESA(0): 640x480@75Hz
(II) VESA(0): 800x600@56Hz
(II) VESA(0): 800x600@60Hz
(II) VESA(0): 800x600@72Hz
(II) VESA(0): 800x600@75Hz
(II) VESA(0): 1024x768@60Hz
(II) VESA(0): Manufacturer's mask: 60
(II) VESA(0): Supported Future Video Modes:
(II) VESA(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) VESA(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 28.3 MHz  Image Size:  270 x 200 mm
(II) VESA(0): h_active: 720  h_sync: 738  h_sync_end 846 h_blank_end 900 h_border: 0
(II) VESA(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 36.0 MHz  Image Size:  270 x 200 mm
(II) VESA(0): h_active: 640  h_sync: 696  h_sync_end 752 h_blank_end 832 h_border: 0
(II) VESA(0): v_active: 480  v_sync: 481  v_sync_end 484 v_blanking: 509 v_border: 0
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 56.2 MHz  Image Size:  270 x 200 mm
(II) VESA(0): h_active: 800  h_sync: 832  h_sync_end 896 h_blank_end 1048 h_border: 0
(II) VESA(0): v_active: 600  v_sync: 601  v_sync_end 604 v_blanking: 631 v_border: 0
(II) VESA(0): Ranges: V min: 50  V max: 90 Hz, H min: 30  H max: 54 kHz, PixClock max 60 MHz
(II) VESA(0): Searching for matching VESA mode(s):
[...video mode data...]
(II) VESA(0): Total Memory: 1023 64KB banks (65472kB)
(WW) VESA(0): config file vrefresh range 40-90Hz not within DDC vrefresh range 50-90Hz
(II) VESA(0): My Monitor: Using hsync range of 31.50-50.00 kHz
(II) VESA(0): My Monitor: Using vrefresh range of 40.00-90.00 Hz
(--) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(--) VESA(0): Display dimensions: (270, 200) mm
(--) VESA(0): DPI set to (96, 97)
(WW) (1024x768,My Monitor) mode clock 65MHz exceeds DDC maximum 60MHz
(WW) (1024x768,My Monitor) mode clock 75MHz exceeds DDC maximum 60MHz
(WW) (1024x768,My Monitor) mode clock 78.8MHz exceeds DDC maximum 60MHz
(WW) (1024x768,My Monitor) mode clock 94.5MHz exceeds DDC maximum 60MHz
(II) VESA(0): Attempting to use 60Hz refresh for mode "1024x768" (13c)
(II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (13b)
(II) VESA(0): Attempting to use 85Hz refresh for mode "640x480" (13a)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/X11R6/lib/modules/libshadow.a
(II) Module shadow: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.3.0, module version = 1.0.0
        ABI class: XFree86 ANSI C Emulation, version 0.2
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1        0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1        0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1        0        0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1        0        0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1        0        0xcfff8000 - 0xcfff8fff (0x1000) MX[B]
        [6] -1        0        0xcfffb000 - 0xcfffbfff (0x1000) MX[B]
        [7] -1        0        0xcfffa000 - 0xcfffafff (0x1000) MX[B]
        [8] -1        0        0xcfff9000 - 0xcfff9fff (0x1000) MX[B]
        [9] -1        0        0xd0000000 - 0xcfffffff (0x0) MX[B]O
        [10] -1        0        0xcfee0000 - 0xcfefffff (0x20000) MX[B](B)
        [11] -1        0        0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
        [12] 0        0        0x000a0000 - 0x000affff (0x10000) MS[B]
        [13] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [14] 0        0        0x000b8000 - 0x000bffff (0x8000) MS[B]
        [15] -1        0        0x0000ffff - 0x0000ffff (0x1) IX[B]
        [16] -1        0        0x00000000 - 0x000000ff (0x100) IX[B]
        [17] -1        0        0x0000cc00 - 0x0000ccff (0x100) IX[B]
        [18] -1        0        0x0000d800 - 0x0000d87f (0x80) IX[B]
        [19] -1        0        0x0000dc00 - 0x0000dcff (0x100) IX[B]
        [20] -1        0        0x0000d000 - 0x0000d07f (0x80) IX[B]
        [21] -1        0        0x0000d400 - 0x0000d4ff (0x100) IX[B]
        [22] -1        0        0x0000ff00 - 0x0000ff0f (0x10) IX[B]
        [23] -1        0        0x00000c00 - 0x00000c1f (0x20) IX[B]
        [24] -1        0        0x0000ac00 - 0x0000ac7f (0x80) IX[B](B)
        [25] 0        0        0x000003b0 - 0x000003bb (0xc) IS[B]
        [26] 0        0        0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 65472 kB
(II) VESA(0): VESA VBE OEM: SiS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor:
(II) VESA(0): VESA VBE OEM Product:
(II) VESA(0): VESA VBE OEM Product Rev:
(II) VESA(0): Splitting WC range: base: 0xc0000000, size: 0x3ff0000
(II) VESA(0): Splitting WC range: base: 0xc2000000, size: 0x1ff0000
(II) VESA(0): Splitting WC range: base: 0xc3000000, size: 0xff0000
(II) VESA(0): Splitting WC range: base: 0xc3800000, size: 0x7f0000
(II) VESA(0): Splitting WC range: base: 0xc3c00000, size: 0x3f0000
(II) VESA(0): Splitting WC range: base: 0xc3e00000, size: 0x1f0000
(II) VESA(0): Splitting WC range: base: 0xc3f00000, size: 0xf0000
(II) VESA(0): Splitting WC range: base: 0xc3f80000, size: 0x70000
(II) VESA(0): Splitting WC range: base: 0xc3fc0000, size: 0x30000
(==) VESA(0): Write-combining range (0xc3fe0000,0x10000)
(==) VESA(0): Write-combining range (0xc3fc0000,0x30000)
(==) VESA(0): Write-combining range (0xc3f80000,0x70000)
(==) VESA(0): Write-combining range (0xc3f00000,0xf0000)
(==) VESA(0): Write-combining range (0xc3e00000,0x1f0000)
(==) VESA(0): Write-combining range (0xc3c00000,0x3f0000)
(==) VESA(0): Write-combining range (0xc3800000,0x7f0000)
(==) VESA(0): Write-combining range (0xc3000000,0xff0000)
(==) VESA(0): Write-combining range (0xc2000000,0x1ff0000)
(==) VESA(0): Write-combining range (0xc0000000,0x3ff0000)
(II) VESA(0): virtual address = 0x40286000,
        physical address = 0xc0000000, size = 67043328
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "PS/2"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
GetModeLine - scrn: 0 clock: 0
GetModeLine - hdsp: 1024 hbeg: 0 hend: 0 httl: 0
              vdsp: 768 vbeg: 0 vend: 0 vttl: 0 flags: 0
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Mouse1: ps2EnableDataReporting: succeeded



All times are GMT -5. The time now is 10:40 PM.