belga |
07-12-2005 05:59 PM |
Cannot start X with ATi Radeon X300 on Slackware 10.1
I'm trying to get a Dell OptiPlex GX280 (P4 3.2/1GB RAM/160GB HD) to work with the video card in the subject. I managed to start X using the radeon driver included in X.org 6.8.2, but things were running a little slow... So I decided to install the binary driver from ATi.
Now X doesn't start, it's just a black screen with no mouse pointer and everything is frozen: Ctrl+Alt+Bkspc does nothing, Ctrl+Alt+Del makes one long beep and then nothing (?!); the only thing to do is to power the system off.
I see no errors in the X.org log, the only odd thing is a message about agpgart in the system bootup.
I'm running Slackware 10.1 upgraded to current, with kernel 2.4.29.
Here is the relevant info:
- lspci output
Code:
englebip@pauling:~$ /sbin/lspci
00:00.0 Host bridge: Intel Corp.: Unknown device 2580 (rev 04)
00:01.0 PCI bridge: Intel Corp.: Unknown device 2581 (rev 04)
00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 0 (rev 03)
00:1c.1 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
00:1d.3 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corp. I/O Controller Hub Audio (rev 03)
00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 03)
00:1f.2 IDE interface: Intel Corp. I/O Controller Hub SATA cc=ide (rev 03)
00:1f.3 SMBus: Intel Corp. I/O Controller Hub SMBus (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5b60
01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
02:00.0 Ethernet controller: Broadcom Corporation: Unknown device 1677 (rev 01)
- uname -r output
Code:
englebip@pauling:~$ uname -r
2.4.29
- /var/log/Xorg.0.log
Code:
englebip@pauling:~$ cat /var/log/Xorg.0.log | grep -e WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local".
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Speedo".
(WW) Open APM failed (/dev/apm_bios) (No such device)
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) fglrx(0): Cannot read colourmap from VGA. Will restore with default
(WW) fglrx(0): [drm] using DRM defaults (QS_ID=99000000)
Code:
englebip@pauling:~$ tail /var/log/Xorg.0.log
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
30 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
- dmesg agp message
Code:
englebip@pauling:~$ dmesg | grep agp
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected an Intel(R) 915G, but could not find the secondary device. Assuming a non-integrated video card.
agpgart: no supported devices found.
-/etc/X11/xorg.conf
Code:
englebip@pauling:~$ cat /etc/X11/xorg.conf | grep -e '^[^#]'
Section "dri"
Mode 0666
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 30-81
VertRefresh 56-76
Option "DPMS"
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
#Option "NoDDC"
Option "no_accel" "no"
Option "no_dri" "no"
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
Option "Capabilities" "0x00000000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0" # AGP locked user pages: disabled
BusID "PCI:1:0:0" # vendor=1002, device=5b60
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Any help will be appreciated.
|