- I have an Acer Aspire One AOA110 running lubuntu 11.10.
- A couple of years ago the 8gb SSD drive stopped working so I fitted a HDD from an ipod classic.
- The netbook has recently started overheating a few seconds after each boot, so I want to access that HDD from another PC
- I have bought a ZIF to USB adapter/enclosure like this one
http://youtu.be/7vaMtXwqWXc
- When connected it appears in the file browser but opening the icon has no effect
- It appears as sdb in /dev but doesn't show up in fdisk -l
- Other CLI outputs as follows:
lsusb:
Bus 001 Device 004: ID 13fd:1040 Initio Corporation
dmesg:
[ 1154.604096] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 1155.016801] Initializing USB Mass Storage driver...
[ 1155.016997] scsi2 : usb-storage 1-5:1.0
[ 1155.017194] usbcore: registered new interface driver usb-storage
[ 1155.017199] USB Mass Storage support registered.
[ 1156.016786] scsi 2:0:0:0: Direct-Access Initio INIC-1511 1.06 PQ: 0 ANSI: 0
[ 1156.023454] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1156.060885] sd 2:0:0:0: [sdb] Unit Not Ready
[ 1156.060891] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[ 1156.060898] sd 2:0:0:0: [sdb] Add. Sense: No additional sense information
[ 1156.180995] sd 2:0:0:0: [sdb] READ CAPACITY failed
[ 1156.181001] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1156.181007] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[ 1156.181014] sd 2:0:0:0: [sdb] Add. Sense: No additional sense information
[ 1156.220991] sd 2:0:0:0: [sdb] Write Protect is off
[ 1156.220997] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1156.260980] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1156.260987] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1156.300845] sd 2:0:0:0: [sdb] Unit Not Ready
[ 1156.300852] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[ 1156.300859] sd 2:0:0:0: [sdb] Add. Sense: No additional sense information
[ 1156.536809] sd 2:0:0:0: [sdb] Unit Not Ready
[ 1156.536815] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[ 1156.536822] sd 2:0:0:0: [sdb] Add. Sense: No additional sense information
[ 1156.577055] sd 2:0:0:0: [sdb] READ CAPACITY failed
[ 1156.577061] sd 2:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
[ 1156.577067] sd 2:0:0:0: [sdb] Sense Key : Hardware Error [current]
[ 1156.577074] sd 2:0:0:0: [sdb] Add. Sense: No additional sense information
[ 1156.661235] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 1156.661242] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1156.661247] sd 2:0:0:0: [sdb] Attached SCSI removable disk
uname -r:
3.2.0-23-generic
Any ideas how to mount it then?
