ta0kira |
08-27-2006 08:21 AM |
Before you connect or turn the modem on, type
Code:
tail -f /var/log/messages
This will show the end of the messages and will follow them as the file grows. Next, attach the modem via USB and turn it on (after you've loaded your modules, of course.) You should get several lines telling about the device. Somewhere in there you should see a line with a device name, such as
Code:
Aug 27 09:16:40 darkstar kernel: [4295058.178000] sdc: sdc1
If not, then you need to obtain and/or load a different module. If possible you should try to connect through an ethernet card; that's MUCH more likely to work, and shouldn't require any additional modules.
ta0kira
|