Hi all!!
Recently i wanted to connect my RH box with my mobile (Nokia 3660) through bluetooth, unfortunately i'm not able to do it. Here's the steps:
I got all the modules installed (bluez, rfcomm, l2cap)
With hcitool scan i discover the address of the phone
i ping it with l2cap and give answer.
I create a /dev/rfcomm0 with mknod (mknod -m 666 /dev/rfcomm0 c 216 0)
I did all the configs to /etc/bluetooth/hci.conf and /etc/bluetooth/rfcomm.conf and also put a PIN code.
When i try to connect from the phone to the PC it says "impossible to link to Bluez(o)" . I don't even put the PIN code.
With rfcomm: rfcomm connect address i put the pin code i put on the PIN file, with no good response (connection refused)
Anything else i tryed to do with rfcomm i get Can't get device list: Operation not supported (rfcomm -i, rfcomm bind...)
Maybe the problem is that i created the /dev/rfcomm0 with mknod? If this is the problem, how i solve it? Is there any other way to get a /dev/rfcomm0 working dev??
Thnx a lot