Audigy sound problem with 2 soundcards
Hey everyone,
I'm new to this and I have a problem with my Sound blaster Audigy card. I have suse 9.0 and a onboard via soundcard and a PCI Audigy 1 card. I get sound out of the onboard via card but not the Audigy when I select it on kmix in KDE 3.1. I have noticed that the CD Audio works. Oh yeah nothing is muted. I updated the ALSA drivers that came with suse to the newest version 1.(something). I figured maybe it needed to be updated but still no change. I was also wondering if I need to disble the onboard sound in bios. Also Say, If I did go ahead and disable it but the Audigy still won't work (because this is the only card thats working right now and I don't want to mess that up) will it work correctly once its reenabled? Well here is the output of some commands. craig@linux:~> cat /proc/pci PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies, Inc. VT8361 [KLE133] Host Bridge (rev 0). Master Capable. Latency=8. Prefetchable 32 bit memory at 0xd8000000 [0xdbffffff]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies, Inc. VT8361 [KLE133] AGP Bridge (rev 0). Master Capable. No bursts. Min Gnt=4. Bus 0, device 7, function 0: ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 64). Bus 0, device 7, function 1: IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 6). Master Capable. Latency=32. I/O at 0xc000 [0xc00f]. Bus 0, device 7, function 2: USB Controller: VIA Technologies, Inc. USB (rev 26). IRQ 5. Master Capable. Latency=32. I/O at 0xc400 [0xc41f]. Bus 0, device 7, function 3: USB Controller: VIA Technologies, Inc. USB (#2) (rev 26). IRQ 5. Master Capable. Latency=32. I/O at 0xc800 [0xc81f]. Bus 0, device 7, function 4: Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 64). IRQ 9. Bus 0, device 7, function 5: Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 80). IRQ 10. I/O at 0xcc00 [0xccff]. I/O at 0xd000 [0xd003]. I/O at 0xd400 [0xd403]. Bus 0, device 8, function 0: Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 17). IRQ 11. Master Capable. Latency=32. Min Gnt=64.Max Lat=128. I/O at 0xdc00 [0xdcff]. Non-prefetchable 32 bit memory at 0xe1005000 [0xe10053ff]. Bus 0, device 9, function 0: Multimedia audio controller: Creative Labs SB Audigy (rev 3). IRQ 12. Master Capable. Latency=32. Min Gnt=2.Max Lat=20. I/O at 0xe000 [0xe01f]. Bus 0, device 9, function 2: FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 0). IRQ 10. Master Capable. Latency=32. Min Gnt=2.Max Lat=4. Non-prefetchable 32 bit memory at 0xe1004000 [0xe10047ff]. Non-prefetchable 32 bit memory at 0xe1000000 [0xe1003fff]. Bus 0, device 10, function 0: VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX] (rev 178). IRQ 10. Master Capable. Latency=248. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xdd000000 [0xddffffff]. Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff]. Bus 1, device 0, function 0: VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 0). IRQ 11. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xdf800000 [0xdfffffff]. Non-prefetchable 32 bit memory at 0xe0000000 [0xe001ffff]. Non-prefetchable 32 bit memory at 0xdf000000 [0xdf7fffff]. craig@linux:~> cat /etc/modules.conf I trimed some of the output of this command to save room. If you want to know the full output I will post it if needed. ##################################################### # Aliases for OSS # # These aliases will be changed by YaST2 sound configurator. # If you would like to configure OSS drivers by yourself, please # take a look at the files on /usr/src/linux/Documentation/sound. # ##################################################### alias char-major-14 off alias sound off alias midi off pre-install mga /sbin/modprobe "-k" "agpgart" pre-install r128 /sbin/modprobe "-k" "agpgart" pre-install radeon /sbin/modprobe "-k" "agpgart" options agpgart agp_try_unsupported=1 options snd-emu10k1 snd_enable=1 snd_index=1 options snd-via82xx snd_ac97_clock=48000 snd_enable=1 snd_index=0 # YaST2: sound system dependent part # alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-slot-1 snd-card-1 alias sound-service-1-0 snd-mixer-oss alias sound-slot-2 off alias sound-service-2-0 off alias sound-slot-3 off alias sound-service-3-0 off options snd snd_cards_limit=2 snd_major=116 # hlTL.7pz2GijuJ12:VT82C686 AC97 Audio Controller alias snd-card-0 snd-via82xx # WL76.11lYqccPdB0:SB Audigy alias snd-card-1 snd-emu10k1 alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-11 snd-mixer-oss alias sound-service-0-12 snd-pcm-oss alias sound-service-1-1 snd-seq-oss alias sound-service-1-3 snd-pcm-oss alias sound-service-1-8 snd-seq-oss alias sound-service-1-11 snd-mixer-oss alias sound-service-1-12 snd-pcm-oss # end of i386 part for modules.conf # please keep this at the end and add local modifications to modules.conf.local include /etc/modules.conf.local alias char-major-195 nvidia craig@linux:~> cat /proc/modules snd-pcm-oss 49728 0 (autoclean) snd-mixer-oss 15576 0 (autoclean) [snd-pcm-oss] videodev 6272 0 (autoclean) nvidia 1628480 11 (autoclean) isa-pnp 32712 0 (unused) usbserial 19836 0 (autoclean) (unused) parport_pc 28648 1 (autoclean) lp 6304 0 (autoclean) parport 25608 1 (autoclean) [parport_pc lp] printer 7072 0 snd-seq-oss 30048 0 (autoclean) snd-seq-midi 5088 0 (unused) snd-emu10k1-synth 6396 0 snd-emux-synth 31484 0 [snd-emu10k1-synth] snd-seq-midi-emul 5376 0 [snd-emux-synth] snd-seq-virmidi 4040 0 [snd-emux-synth] snd-seq-midi-event 3840 0 [snd-seq-oss snd-seq-midi snd-seq-virmidi] snd-seq 41424 3 [snd-seq-oss snd-seq-midi snd-emux-synth snd-seq-midi-emul snd-seq-virmidi snd-seq-midi-event] snd-emu10k1 78788 0 [snd-emu10k1-synth] snd-util-mem 1696 0 [snd-emux-synth snd-emu10k1] Thank You in advance for taking the time to look through this. I am a normal windows user and just started playing around with linux for about 2 months now and I love it. Craig |
All times are GMT -5. The time now is 07:20 PM. |