Attempting to get Hauppauge WinTV-HVR-1280 to function
Hello,
I have a new HP quad-core AMD-64 system that came with Vista Home Premium 64, and this Hauppauge card. It has a Conexant cx23885/88 chip with Samsung front-end. I know this is not supported as of yet, however, I can get everything set up using the insmod option with card=20 (Hauppauge WinTV-HVR-1255). This recognizes everything except the model #, which is 85721. I loaded the V4L-DVB drivers as well as the DTV drivers and tried to do a channel scan, which says it will create a channels.conf file for xine. It runs through the scan, looks like it finds channels, then errors out at the end. Xine finds the tuner, but needs the channels.conf to work. I need to find a way to create the channels.conf file. Any suggestions? My info: dmesg: [ 58.176331] cx23885 driver version 0.0.2 loaded [ 58.176448] cx23885 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, l ow) -> IRQ 17 [ 58.176674] CORE cx23885[0]: subsystem: 0070:8551, board: Hauppauge WinTV-HVR 1255 [card=20,insmod option] [ 58.323936] tveeprom 1-0050: Hauppauge model 85721, rev C4F5, serial# 5303351 [ 58.323939] tveeprom 1-0050: MAC address is 00-0D-FE-50-EC-37 [ 58.323941] tveeprom 1-0050: tuner model is NXP 18271C2 (idx 155, type 54) [ 58.323943] tveeprom 1-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x 88) [ 58.323945] tveeprom 1-0050: audio processor is CX23888 (idx 40) [ 58.323947] tveeprom 1-0050: decoder processor is CX23888 (idx 34) [ 58.323948] tveeprom 1-0050: has no radio [ 58.323949] cx23885[0]: warning: unknown hauppauge model #85721 [ 58.323951] cx23885[0]: hauppauge eeprom: model=85721 [ 58.323953] cx23885_dvb_register() allocating 1 frontend(s) [ 58.323955] cx23885[0]: cx23885 based dvb card [ 58.616024] tda18271 2-0060: creating new instance [ 58.618047] TDA18271HD/C2 detected @ 2-0060 [ 58.960695] DVB: registering new adapter (cx23885[0]) [ 58.960699] DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB F rontend)... [ 58.960883] cx23885_dev_checkrevision() New hardware revision found 0x0 [ 58.960885] cx23885_dev_checkrevision() Hardware revision unknown 0x0 [ 58.960891] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xfea00000 [ 58.960898] cx23885 0000:04:00.0: setting latency timer to 64 [ 58.960901] IRQ 17/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 403.765890] cx23885 0000:04:00.0: PCI INT A disabled [ 403.766285] tda18271 2-0060: destroying instance [ 403.799640] cx23885 driver version 0.0.2 loaded [ 403.799998] cx23885 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, l ow) -> IRQ 17 [ 403.800794] CORE cx23885[0]: subsystem: 0070:8551, board: Hauppauge WinTV-HVR 1255 [card=20,insmod option] [ 403.948869] tveeprom 1-0050: Hauppauge model 85721, rev C4F5, serial# 5303351 [ 403.948877] tveeprom 1-0050: MAC address is 00-0D-FE-50-EC-37 [ 403.948884] tveeprom 1-0050: tuner model is NXP 18271C2 (idx 155, type 54) [ 403.948891] tveeprom 1-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x 88) [ 403.948897] tveeprom 1-0050: audio processor is CX23888 (idx 40) [ 403.948903] tveeprom 1-0050: decoder processor is CX23888 (idx 34) [ 403.948908] tveeprom 1-0050: has no radio [ 403.948912] cx23885[0]: warning: unknown hauppauge model #85721 [ 403.948917] cx23885[0]: hauppauge eeprom: model=85721 [ 403.948922] cx23885_dvb_register() allocating 1 frontend(s) [ 403.948928] cx23885[0]: cx23885 based dvb card [ 403.996449] tda18271 2-0060: creating new instance [ 403.998469] TDA18271HD/C2 detected @ 2-0060 [ 404.330720] DVB: registering new adapter (cx23885[0]) [ 404.330730] DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB F rontend)... [ 404.331211] cx23885_dev_checkrevision() New hardware revision found 0x0 [ 404.331218] cx23885_dev_checkrevision() Hardware revision unknown 0x0 [ 404.331229] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xfea00000 [ 404.331242] cx23885 0000:04:00.0: setting latency timer to 64 [ 404.331250] IRQ 17/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 1631.380513] tda18271: performing RF tracking filter calibration [ 1633.270226] tda18271: RF tracking filter calibration complete [ 2971.547911] DVB: adapter 0 frontend 0 frequency 863000000 out of range (54000 000..858000000) [ 5052.596057] DVB: adapter 0 frontend 0 frequency 863000000 out of range (54000 000..858000000) lspci: 04:00.0 Multimedia video controller: Conexant Systems, Inc. Hauppauge Inc. HDPVR-1250 model 1196 (rev 04) Thanks in advance for any suggestions. |
Nobody responds, so I'll guess...
Has nobody made an internet posting of a version of a channel.conf file for their 1255 or some other 1250 series that you could edit and use? I assume that you could find the frequency information for the input channels and write it in. What scan command did you use, as "su", "w_scan -fa" for a digital signal? You had success with "card=20", but would there be any other designation number that lets the card function and might let you configure the channels? "lspci" sees this card as a 1250, so I thought that you might try other 1250 variants. I know little about this, but at least this post might attract someone who knows more, someone with a better idea. |
Thank you for your reply. I've tried all the other HVR cards that are on the list. The 1255 is the only one that doesn't error out. I'm working with a guy at Mercurial that hopefully will add my actual card to the card list, so we'll see what happens.
But, I can always use input from any interested parties ;-) |
All times are GMT -5. The time now is 05:29 PM. |