amcc ppc440 doen't work with mavell sata
Actually I'm using a amcc taishan ppc440gx,and I want it support my marvell sata and i download the kernel at ftp://ftp.denx.de/pub/linux/
and compile my kernel for taishan ppc440gx.but It can't boot ..... ***************************************************************************** eth1: found ET1011C Gigabit Ethernet PHY (0x03) e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation PPP generic driver version 2.4.2 NET: Registered protocol family 24 sata_mv 0000:00:01.0: version 0.81 sata_mv 0000:00:01.0: 32 slots 8 ports SCSI mode IRQ via INTx scsi0 : sata_mv scsi1 : sata_mv scsi2 : sata_mv scsi3 : sata_mv scsi4 : sata_mv scsi5 : sata_mv scsi6 : sata_mv scsi7 : sata_mv ata1: SATA max UDMA/133 cmd 0x00000000 ctl 0xd10a2120 bmdma 0x00000000 irq 23 ata2: SATA max UDMA/133 cmd 0x00000000 ctl 0xd10a4120 bmdma 0x00000000 irq 23 ata3: SATA max UDMA/133 cmd 0x00000000 ctl 0xd10a6120 bmdma 0x00000000 irq 23 ata4: SATA max UDMA/133 cmd 0x00000000 ctl 0xd10a8120 bmdma 0x00000000 irq 23 ata5: SATA max UDMA/133 cmd 0x00000000 ctl 0xd10b2120 bmdma 0x00000000 irq 23 ata6: SATA max UDMA/133 cmd 0x00000000 ctl 0xd10b4120 bmdma 0x00000000 irq 23 ata7: SATA max UDMA/133 cmd 0x00000000 ctl 0xd10b6120 bmdma 0x00000000 irq 23 ata8: SATA max UDMA/133 cmd 0x00000000 ctl 0xd10b8120 bmdma 0x00000000 irq 23 ata1: no device found (phy stat 00000000) ata2: no device found (phy stat 00000000) ata3: no device found (phy stat 00000000) ata4: no device found (phy stat 00000000) ata5.00: ATA-7: ST380211AS, 3.AAE, max UDMA/133 ata5.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 ata6: no device found (phy stat 00000000) ata7: no device found (phy stat 00000000) ata8: no device found (phy stat 00000000) scsi 4:0:0:0: Direct-Access ATA ST380211AS 3.AA PQ: 0 ANSI: 5 sd 4:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 4:0:0:0: [sda] Write Protect is off sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: **************************************************************** and it stopped here .... here are some of my config file. CONFIG_PCI=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_MV=y any ideas? |
up...
someone please help me. 3ks.
|
All times are GMT -5. The time now is 01:57 AM. |