LinuxQuestions.org
Latest LQ Deal: Complete CCNA, CCNP & Red Hat Certification Training Bundle
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 05-04-2005, 04:53 PM   #1
mpyusko
Member
 
Registered: Oct 2003
Location: Rochester, NY, USA
Distribution: Salckware ver 10.1 - 14.1, Debian too.
Posts: 432
Blog Entries: 1

Rep: Reputation: 41
3D Prophet 4500 Kyro Chipset


.I have Slack 10.1 running 2.4.xx with a 3D Prophet 4500 Kyro Chipset video card.
the ouput of lspci:


Quote:
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23)
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 10)
00:04.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 11)
00:04.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30)
00:09.0 Ethernet controller: Lite-On Communications Inc LNE100TX [Linksys EtherFast 10/100] (rev 25)
00:0a.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
01:00.0 VGA compatible controller: STMicroelectronics STG4000 [3D Prophet Kyro Series] (rev 0f)
I went to http://www.powervr.com/Downloads/Drivers/Index.asp and dowloaded the powervr-2.01.21-7.src.rpm

Quote:
Rpm based system with custom kernel
===================================

Requirements: linux kernel 2.4.x or >= 2.5.8, source in /usr/src/linux.

Download powervr-2.01.21-7.src.rpm. Run the following as root:

rpm --rebuild powervr-2.01.21-7.src.rpm

If running Red Hat 8.0 (or another distribution with a newer version
of rpm), the command is "rpmbuild" instead of "rpm".

Look for a line near the end of the output which says where the
resulting rpm is being placed. This line will read something like
this:

Wrote: /usr/src/redhat/RPMS/i386/powervr-2.01.21-7.i386.rpm

Run "rpm -Uvh" on the indicated file. For this example, the command
would be:

rpm -Uvh /usr/src/redhat/RPMS/i386/powervr-2.01.21-7.i386.rpm

To complete the installation for the first time the X server must be
configured, described in the "XFree86 Configuration" section.
i get:
Quote:
xxxxxxx# rpm --rebuild powervr-2.01.21-7.src.rpm
--rebuild: unknown option
when i start following them.

What am I doing wrong?
What can I do to get this to work?
Please help.

dmesg:

Quote:
Linux version 2.4.29 (root@midas) (gcc version 3.3.4) #8 Thu Jan 20 16:36:28 PST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65532
zone(0): 4096 pages.
zone(1): 61436 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
Kernel command line: BOOT_IMAGE=Linux ro root=305 hdd=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 1000.066 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1992.29 BogoMIPS
Memory: 255876k/262128k available (1959k kernel code, 5864k reserved, 649k data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf0890, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0596] at 00:04.0
PCI: Found IRQ 5 for device 00:09.0
PCI: Sharing IRQ 5 with 00:04.2
Activating ISA DMA hang workarounds.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
vesafb: framebuffer at 0xd8000000, mapped to 0xd080d000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at c000:8558
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci00:04.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hdaMA, hdbMA
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdcMA, hddMA
hda: ST310220A, ATA DISK drive
hdb: Maxtor 6Y120L0, ATA DISK drive
blk: queue c03dd8e0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03dda1c, I/O limit 4095Mb (mask 0xffffffff)
hdc: DVD-ROM BDV212B, ATAPI CD/DVD-ROM drive
hdd: CD-RW 52X24, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 20005650 sectors (10243 MB) w/512KiB Cache, CHS=1245/255/63, UDMA(66)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(66)
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdb: hdb1
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 1654.800 MB/sec
32regs : 952.400 MB/sec
pIII_sse : 2017.200 MB/sec
pII_mmx : 2264.000 MB/sec
p5_mmx : 2362.800 MB/sec
raid5: using function: pIII_sse (2017.200 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,5)) ...
for (ide0(3,5))
ide0(3,5):Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 132k freed
Adding Swap: 522104k swap-space (priority -1)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Apollo Pro chipset
agpgart: AGP aperture is 64M @ 0xe4000000
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
PCI: Enabling device 00:09.0 (0084 -> 0087)
PCI: Found IRQ 5 for device 00:09.0
PCI: Sharing IRQ 5 with 00:04.2
eth0: Lite-On PNIC-II rev 37 at 0xb000, 00:A0:CC:E2:5D:A3, IRQ 5.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: ATAPI Model: CD-RW 52X24 Rev: K.IC
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,6)) ...
for (ide0(3,6))
ide0(3,6):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,7)) ...
for (ide0(3,7))
ide0(3,7):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,8)) ...
for (ide0(3,8))
ide0(3,8):Using r5 hash to sort names
PCI: Enabling device 00:0a.0 (0004 -> 0006)
PCI: Assigned IRQ 9 for device 00:0a.0
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 5 for device 00:04.2
PCI: Sharing IRQ 5 with 00:09.0
uhci.c: USB UHCI at I/O 0xb400, IRQ 5
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
if you happen to notice anything out of whack in the dmesg output. Please tell me, I'm still learning.

Thank you

Last edited by mpyusko; 05-08-2005 at 06:46 AM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
hercules 3D prophet 4500 driver TranceDude Linux - Software 7 09-04-2006 08:06 AM
Hercules 3D prophet 4500 driver TranceDude Linux - Hardware 0 08-12-2005 01:37 PM
Kyro 2 chipset video card help plz thunderrooster Linux - Hardware 5 09-12-2002 06:30 AM
3d prophet hercules 4500 video card problems with Red Hat 7.2 installation Zingaro2002 Linux - Software 1 02-16-2002 12:18 PM
Problem with prophet 4500 (kyroII) vga alexgn Linux - Newbie 1 10-23-2001 08:14 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 01:11 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration