Quote:
Originally Posted by unSpawn
Is there anything you should tell us about your WD 500GB HD? Any hardware failures? Or just deletion you're trying to recover from? What file system was on it? Does your computer BIOS list the HD? What does 'dmesg' say about harddisks or detection errors when you boot Parted Magic? If you have any other Live CDs try those, especially HELIX version 2 or recent KNOPPIX, and jot down the same. If you have an USB casing you could try using that.
|
The drive I want to clone has lots of bad sectors and I cannot access the file system, so I want to do a sector by sector copy, and then I will have a clone I can work with.
Trying to fix the drive will only make it worse.
The drive is recognized by the BIOS.
The file system is NTFS, but with a sector by sector copy, it doesn't matter what it is.
I have tried knoppix, but it has troubles booting properly.
I don't a spare usb case laying around.
When I run "dmesg" it outputs this:
Part1:
.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] Unhandled sense code
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 2:0:0:0: [sda] ASC=0x11 ASCQ=0x4
sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] Unhandled sense code
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 2:0:0:0: [sda] ASC=0x11 ASCQ=0x4
sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] Unhandled sense code
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 2:0:0:0: [sda] ASC=0x11 ASCQ=0x4
sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
NFSD: starting 90-second grace period
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
svc: failed to register lockdv1 RPC service (errno 97).
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] Unhandled sense code
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 2:0:0:0: [sda] ASC=0x11 ASCQ=0x4
sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] Unhandled sense code
sd 2:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
sd 2:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 00 00 00
sd 2:0:0:0: [sda] ASC=0x11 ASCQ=0x4
sd 2:0:0:0: [sda] CDB: cdb[0]=0x28: 28 00 00 00 00 00 00 00 08 00
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: BMDMA stat 0x24
ata3.00: failed command: READ DMA
ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/40:00:00:00:00/00:00:00:00:00/e0 Emask 0x9 (media error)