| jabka |
07-11-2006 10:11 AM |
unable to use motorola e1000 with linux.
Howdy ,...
reastnly i bought motorola e1000 and i wish to use it with my linux box.
my sys is debian unstable.
Code:
debian:/proc/bus/usb# uname -a
Linux debian 2.6.16-2-k7 #1 Wed Jun 21 18:43:32 UTC 2006 i686 GNU/Linux
when i connected th phone to my pc i see that the kernel knows what it is.
Code:
debian:/proc/bus/usb# dmesg |tail
usbcore: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
usb 2-1: USB disconnect, address 2
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
cdc_acm 2-2:1.0: ttyACM0: USB ACM device
usb 2-2: USB disconnect, address 3
usb 2-2: new full speed USB device using uhci_hcd and address 4
usb 2-2: configuration #1 chosen from 1 choice
cdc_acm 2-2:1.0: ttyACM0: USB ACM device
my /proc/bus/usb/devices is :
Code:
debian:/proc/bus/usb# cat ./devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.16-2-k7 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:07.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22b8 ProdID=3002 Rev= 0.01
S: Manufacturer=Motorola Inc.
S: Product=Motorola Phone (E1000)
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 20mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
E: Ad=8b(I) Atr=03(Int.) MxPS= 16 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.16-2-k7 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c00e Rev=11.10
S: Manufacturer=Logitech
S: Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
as you can see my kernel can see my mobile.
now the hard part:
i installed moto4lin and Kmobiletools both cannot connect the phone :
Quote:
mha13@debian:/dev$ moto4lin
Form1
PhoneMan
New mode: 1
doActConnect
doActConnect
P2kProc::doConnect()
doActConnect
doActConnect
P2kProc::doConnect()
New mode: 0
New mode: 1
P2kProc::doConnect()
doActConnect
doActConnect
P2kProc::doConnect()
doActConnect
doActConnect
P2kProc::doConnect()
doActConnect
doActConnect
P2kProc::doConnect()
|
|
