| Linux~Powered |
02-13-2010 04:21 PM |
udev.rules
I'm trying to configure custom udev.rules for my thumbdrive and iPod but udev doesn't detect my settings. I'm running Slackware 13.0 with a custom 10-local.rules file. udevadmin monitor --enviornment reports...
Code:
UDEV [1266131848.593241] change /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/host4/target4:0:0/4:0:0:0/block/sdb (block)
UDEV_LOG=3
ACTION=change
DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/host4/target4:0:0/4:0:0:0/block/sdb
SUBSYSTEM=block
DEVNAME=/dev/sdb
DEVTYPE=disk
SEQNUM=1355
ID_VENDOR=SanDisk
ID_VENDOR_ENC=SanDisk\x20
ID_VENDOR_ID=0781
ID_MODEL=Cruzer
ID_MODEL_ENC=Cruzer\x20\x20\x20\x20\x20\x20\x20\x20\x20\x20
ID_MODEL_ID=5406
ID_REVISION=7.01
ID_SERIAL=SanDisk_Cruzer_0774300C8D02D129-0:0
ID_SERIAL_SHORT=0774300C8D02D129
ID_TYPE=disk
ID_INSTANCE=0:0
ID_BUS=usb
ID_USB_INTERFACES=:080650:
ID_USB_INTERFACE_NUM=00
ID_USB_DRIVER=usb-storage
ID_PATH=pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0
MAJOR=8
MINOR=16
DEVLINKS=/dev/block/8:16 /dev/disk/by-id/usb-SanDisk_Cruzer_0774300C8D02D129-0:0 /dev/disk/by-path/pci-0000:00:1d.7-usb-0:4:1.0-scsi-0:0:0:0
my 10-local.rules is...
Code:
# Sandisk Thumbdrive rules
KERNEL=="sd?[1-5]", SUBSYSTEM=="block", ATTRS{idVendor}=="SanDisk", NAME="%k", SYMLINK+="thumb", GROUP="users"
My thumbdrive doesn't get detected with /etc/rc.d/rc.udev restart remove and reinstall thumbdrive |
