Linux - GeneralThis Linux forum is for general Linux questions and discussion.
If it is Linux Related and doesn't seem to fit in any other forum then this is the place.
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month. Click here for more info.
I've recently started to play around with kernel compiling and I must say it's really fun!
However, I have this really annoying problem. Any of the kernels I've compiled boot fine, the startup scripts fire off, and just before I'm supposed to reach the login prompt, it freezes. It's a sort of whimpy freeze too; I can make a clean reboot with ctrl-alt-del, i.e. linux goes into init 6, shuts down services and restarts my system.
no, it's a minimal debian install with just the essentials; good ol' console login. I do have an ati-card, but I've compiled the kernel with vesa and it boots fine with the tux-logo and all. There are no graphical problems at all so far.
This is the last bit of my /var/log/messages, from just before I call for reboot (I think). It doesn't even give an error message. Very strange. What does "-- MARK --" (line 7) mean?
Code:
Nov 3 00:06:09 localhost kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Nov 3 00:06:09 localhost kernel: NET: Registered protocol family 17
Nov 3 00:06:10 localhost lpd[3162]: restarted
Nov 3 00:06:10 localhost kernel: NET: Registered protocol family 10
Nov 3 00:06:10 localhost kernel: Disabled Privacy Extensions on device c031ac80(lo)
Nov 3 00:06:10 localhost kernel: IPv6 over IPv4 tunneling driver
Nov 3 00:26:09 localhost -- MARK --
Nov 3 00:39:37 localhost shutdown[25369]: shutting down for system reboot
Nov 3 00:39:40 localhost kernel: Kernel logging (proc) stopped.
Nov 3 00:39:40 localhost kernel: Kernel log daemon terminating.
Nov 3 00:39:40 localhost exiting on signal 15
Nov 3 00:40:45 localhost syslogd 1.4.1#15: restart.
Nov 3 00:40:45 localhost kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
Nov 3 00:40:45 localhost kernel: Inspecting /boot/System.map-2.6.9-nitro2-khash-5
Nov 3 00:40:45 localhost kernel: Loaded 33725 symbols from /boot/System.map-2.6.9-nitro2-khash-5.
Nov 3 00:40:45 localhost kernel: Symbols match kernel version 2.6.9.
Nov 3 00:40:45 localhost kernel: No module symbols loaded - kernel modules not enabled.
Nov 3 00:40:45 localhost kernel: Linux version 2.6.9-nitro2-khash-5 (root@home) (gcc version 3.3.5 (Debian 1:3.3.5-2)) #1 SMP Wed Nov 3 00:38:37 CET 2004
Nov 3 00:40:45 localhost kernel: BIOS-provided physical RAM map:
Nov 3 00:40:45 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 3 00:40:45 localhost kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 3 00:40:45 localhost kernel: BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
Nov 3 00:40:45 localhost kernel: BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
Nov 3 00:40:45 localhost kernel: BIOS-e820: 000000003ffc0000 - 000000003ffcf000 (ACPI data)
Nov 3 00:40:45 localhost kernel: BIOS-e820: 000000003ffcf000 - 000000003fff0000 (ACPI NVS)
Nov 3 00:40:45 localhost kernel: BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Nov 3 00:40:45 localhost kernel: BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Nov 3 00:40:45 localhost kernel: Warning only 896MB will be used.
Nov 3 00:40:45 localhost kernel: Use a HIGHMEM enabled kernel.
Nov 3 00:40:45 localhost kernel: 896MB LOWMEM available.
Nov 3 00:40:45 localhost kernel: found SMP MP-table at 000ff780
Nov 3 00:40:45 localhost kernel: DMI 2.3 present.
Nov 3 00:40:45 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 3 00:40:45 localhost kernel: Processor #0 15:3 APIC version 20
Nov 3 00:40:45 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 3 00:40:45 localhost kernel: Processor #1 15:3 APIC version 20
Nov 3 00:40:45 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Nov 3 00:40:45 localhost kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Nov 3 00:40:45 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 3 00:40:45 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 3 00:40:45 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Nov 3 00:40:45 localhost kernel: Using ACPI (MADT) for SMP configuration information
Nov 3 00:40:45 localhost kernel: Built 1 zonelists
Nov 3 00:40:45 localhost kernel: Kernel command line: vga=0x317 root=/dev/sda3 ro
Nov 3 00:40:45 localhost kernel: Initializing CPU#0
Nov 3 00:40:45 localhost kernel: CPU 0 irqstacks, hard=c054c000 soft=c054a000
Nov 3 00:40:45 localhost kernel: PID hash table entries: 4096 (order: 12, 65536 bytes)
Nov 3 00:40:45 localhost kernel: Detected 3200.301 MHz processor.
Nov 3 00:40:45 localhost kernel: Using tsc for high-res timesource
Nov 3 00:40:45 localhost kernel: Console: colour VGA+ 80x25
Nov 3 00:40:45 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 3 00:40:45 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Nov 3 00:40:45 localhost kernel: Memory: 904260k/917504k available (2986k kernel code, 12760k reserved, 1167k data, 212k init, 0k highmem)
Nov 3 00:40:45 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 3 00:40:45 localhost kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Nov 3 00:40:45 localhost kernel: monitor/mwait feature present.
Nov 3 00:40:45 localhost kernel: using mwait in idle threads.
Nov 3 00:40:45 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Nov 3 00:40:45 localhost kernel: CPU: L2 cache: 1024K
Nov 3 00:40:45 localhost kernel: CPU: Physical Processor ID: 0
Nov 3 00:40:45 localhost kernel: Intel machine check architecture supported.
Nov 3 00:40:45 localhost kernel: Intel machine check reporting enabled on CPU#0.
Nov 3 00:40:45 localhost kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Nov 3 00:40:45 localhost kernel: CPU0: Thermal monitoring enabled
Nov 3 00:40:45 localhost kernel: Enabling fast FPU save and restore... done.
Nov 3 00:40:45 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 3 00:40:45 localhost kernel: Checking 'hlt' instruction... OK.
Nov 3 00:40:45 localhost kernel: CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Nov 3 00:40:45 localhost kernel: per-CPU timeslice cutoff: 2925.71 usecs.
Nov 3 00:40:45 localhost kernel: task migration cache decay timeout: 3 msecs.
Nov 3 00:40:45 localhost kernel: Booting processor 1/1 eip 3000
Nov 3 00:40:45 localhost kernel: CPU 1 irqstacks, hard=c054d000 soft=c054b000
Nov 3 00:40:45 localhost kernel: Initializing CPU#1
Nov 3 00:40:45 localhost kernel: monitor/mwait feature present.
Nov 3 00:40:45 localhost kernel: CPU: Trace cache: 12K uops, L1 D cache: 16K
Nov 3 00:40:45 localhost kernel: CPU: L2 cache: 1024K
Nov 3 00:40:45 localhost kernel: CPU: Physical Processor ID: 0
Nov 3 00:40:45 localhost kernel: Intel machine check architecture supported.
Nov 3 00:40:45 localhost kernel: Intel machine check reporting enabled on CPU#1.
Nov 3 00:40:45 localhost kernel: CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
Nov 3 00:40:45 localhost kernel: CPU1: Thermal monitoring enabled
Nov 3 00:40:45 localhost kernel: CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Nov 3 00:40:45 localhost kernel: Total of 2 processors activated (12713.98 BogoMIPS).
Nov 3 00:40:45 localhost kernel: ENABLING IO-APIC IRQs
Nov 3 00:40:45 localhost kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Nov 3 00:40:45 localhost kernel: checking TSC synchronization across 2 CPUs: passed.
Nov 3 00:40:45 localhost kernel: Brought up 2 CPUs
Nov 3 00:40:45 localhost kernel: NET: Registered protocol family 16
Nov 3 00:40:45 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
Nov 3 00:40:45 localhost kernel: PCI: Using configuration type 1
Nov 3 00:40:45 localhost kernel: mtrr: v2.0 (20020519)
Nov 3 00:40:45 localhost kernel: ACPI: Subsystem revision 20040816
Nov 3 00:40:45 localhost kernel: ACPI: Interpreter enabled
Nov 3 00:40:45 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Nov 3 00:40:45 localhost kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Nov 3 00:40:45 localhost kernel: PCI: Probing PCI hardware (bus 00)
Nov 3 00:40:45 localhost kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Nov 3 00:40:45 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 3 00:40:45 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 3 00:40:45 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 3 00:40:45 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 3 00:40:45 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Nov 3 00:40:45 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 3 00:40:45 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 11 12 14 15)
Nov 3 00:40:45 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Nov 3 00:40:45 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 3 00:40:45 localhost kernel: SCSI subsystem initialized
Nov 3 00:40:45 localhost kernel: usbcore: registered new driver usbfs
Nov 3 00:40:45 localhost kernel: usbcore: registered new driver hub
Nov 3 00:40:45 localhost kernel: PCI: Using ACPI for IRQ routing
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 16 (level, low) -> IRQ 16
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 21
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 21 (level, low) -> IRQ 21
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:02:0f.0[A] -> GSI 19 (level, low) -> IRQ 19
Nov 3 00:40:45 localhost kernel: Machine check exception polling timer started.
Nov 3 00:40:45 localhost kernel: Starting balanced_irq
Nov 3 00:40:45 localhost kernel: audit: initializing netlink socket (disabled)
Nov 3 00:40:45 localhost kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Nov 3 00:40:45 localhost kernel: devfs: boot_options: 0x1
Nov 3 00:40:45 localhost kernel: NTFS driver 2.1.20 [Flags: R/O].
Nov 3 00:40:45 localhost kernel: inotify init: minor=63
Nov 3 00:40:45 localhost kernel: vesafb: ATI Technologies Inc., R350, 01.00 (OEM: ATI R350)
Nov 3 00:40:45 localhost kernel: vesafb: VBE version: 2.0
Nov 3 00:40:45 localhost kernel: vesafb: protected mode interface info at c000:5794
Nov 3 00:40:45 localhost kernel: vesafb: pmi: set display start = c00c5828, set palette = c00c5874
Nov 3 00:40:45 localhost kernel: vesafb: pmi: ports = a810 a816 a854 a838 a83c a85c a800 a804 a8b0 a8b2 a8b4
Nov 3 00:40:45 localhost kernel: vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
Nov 3 00:40:45 localhost kernel: vesafb: scrolling: redraw
Nov 3 00:40:45 localhost kernel: Console: switching to colour frame buffer device 80x30
Nov 3 00:40:45 localhost kernel: vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, size 16384k
Nov 3 00:40:45 localhost kernel: fb0: VESA VGA frame buffer device
Nov 3 00:40:45 localhost kernel: ACPI: Power Button (FF) [PWRF]
Nov 3 00:40:45 localhost kernel: ACPI: Processor [CPU1] (supports C1)
Nov 3 00:40:45 localhost kernel: ACPI: Processor [CPU2] (supports C1)
Nov 3 00:40:45 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 3 00:40:45 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 3 00:40:45 localhost kernel: mice: PS/2 mouse device common for all mice
Nov 3 00:40:45 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Nov 3 00:40:45 localhost kernel: loop: loaded (max 8 devices)
Nov 3 00:40:45 localhost kernel: 8139too Fast Ethernet driver 0.9.27
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:02:0f.0[A] -> GSI 19 (level, low) -> IRQ 19
Nov 3 00:40:45 localhost kernel: eth0: RealTek RTL8139 at 0xb400, 00:0e:a6:b1:ab:ad, IRQ 19
Nov 3 00:40:45 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 3 00:40:45 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 3 00:40:45 localhost kernel: hdc: HP DVD Writer 400, ATAPI CD/DVD-ROM drive
Nov 3 00:40:45 localhost kernel: hdd: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive
Nov 3 00:40:45 localhost kernel: Using cfq io scheduler
Nov 3 00:40:45 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 3 00:40:45 localhost kernel: hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 8192kB Cache
Nov 3 00:40:45 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Nov 3 00:40:45 localhost kernel: hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
Nov 3 00:40:45 localhost kernel: ata1: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xCC00 irq 18
Nov 3 00:40:45 localhost kernel: ata2: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xCC08 irq 18
Nov 3 00:40:45 localhost kernel: ata1: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
Nov 3 00:40:45 localhost kernel: ata1: dev 0 configured for UDMA/133
Nov 3 00:40:45 localhost kernel: scsi0 : ata_piix
Nov 3 00:40:45 localhost kernel: ata2: SATA port has no device.
Nov 3 00:40:45 localhost kernel: scsi1 : ata_piix
Nov 3 00:40:45 localhost kernel: Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
Nov 3 00:40:45 localhost kernel: Type: Direct-Access ANSI SCSI revision: 05
Nov 3 00:40:45 localhost kernel: SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
Nov 3 00:40:45 localhost kernel: SCSI device sda: drive cache: write back
Nov 3 00:40:45 localhost kernel: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 >
Nov 3 00:40:45 localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Nov 3 00:40:45 localhost kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Nov 3 00:40:45 localhost kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 21 (level, low) -> IRQ 21
Nov 3 00:40:45 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[feaff000-feaff7ff] Max Packet=[2048]
Nov 3 00:40:45 localhost kernel: ieee1394: raw1394: /dev/raw1394 device initialized
Nov 3 00:40:45 localhost kernel: sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Nov 3 00:40:45 localhost kernel: ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
Nov 3 00:40:45 localhost kernel: scsi2 : SCSI emulation for IEEE-1394 SBP-2 Devices
Nov 3 00:40:45 localhost kernel: ieee1394: sbp2: Logged into SBP-2 device
Nov 3 00:40:45 localhost kernel: Vendor: WDC Model: FireWire/USB2.0 Rev: 4.17
Nov 3 00:40:45 localhost kernel: Type: Direct-Access ANSI SCSI revision: 06
Nov 3 00:40:45 localhost kernel: SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
Nov 3 00:40:45 localhost kernel: /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3
Nov 3 00:40:45 localhost kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Nov 3 00:40:45 localhost kernel: Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0
Nov 3 00:40:45 localhost kernel: ehci_hcd 0000:00:1d.7: continuing after BIOS bug...
Nov 3 00:40:45 localhost kernel: ehci_hcd 0000:00:1d.7: irq 23, pci mem f8822c00
Nov 3 00:40:45 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
Nov 3 00:40:45 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Nov 3 00:40:45 localhost kernel: hub 1-0:1.0: USB hub found
Nov 3 00:40:45 localhost kernel: hub 1-0:1.0: 8 ports detected
Nov 3 00:40:45 localhost kernel: USB Universal Host Controller Interface driver v2.2
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.0: irq 16, io base 0000e000
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Nov 3 00:40:45 localhost kernel: hub 2-0:1.0: USB hub found
Nov 3 00:40:45 localhost kernel: hub 2-0:1.0: 2 ports detected
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0000e400
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Nov 3 00:40:45 localhost kernel: hub 3-0:1.0: USB hub found
Nov 3 00:40:45 localhost kernel: hub 3-0:1.0: 2 ports detected
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0000e800
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Nov 3 00:40:45 localhost kernel: hub 4-0:1.0: USB hub found
Nov 3 00:40:45 localhost kernel: hub 4-0:1.0: 2 ports detected
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0000ec00
Nov 3 00:40:45 localhost kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Nov 3 00:40:45 localhost kernel: hub 5-0:1.0: USB hub found
Nov 3 00:40:45 localhost kernel: hub 5-0:1.0: 2 ports detected
Nov 3 00:40:45 localhost kernel: usbcore: registered new driver usblp
Nov 3 00:40:45 localhost kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Nov 3 00:40:45 localhost kernel: Initializing USB Mass Storage driver...
Nov 3 00:40:45 localhost kernel: usbcore: registered new driver usb-storage
Nov 3 00:40:45 localhost kernel: USB Mass Storage support registered.
Nov 3 00:40:45 localhost kernel: usbcore: registered new driver usbhid
Nov 3 00:40:45 localhost kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Nov 3 00:40:45 localhost kernel: Advanced Linux Sound Architecture Driver Version 1.0.7rc2.
Nov 3 00:40:45 localhost kernel: ACPI: PCI interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
Nov 3 00:40:45 localhost kernel: ALSA device list:
Nov 3 00:40:45 localhost kernel: #0: Sound Blaster Audigy2 (rev.4) at 0xb800, irq 23
Nov 3 00:40:45 localhost kernel: oprofile: using NMI interrupt.
Nov 3 00:40:45 localhost kernel: NET: Registered protocol family 2
Nov 3 00:40:45 localhost kernel: IP: routing cache hash table of 4096 buckets, 64Kbytes
Nov 3 00:40:45 localhost kernel: TCP: Hash tables configured (established 131072 bind 43690)
Nov 3 00:40:45 localhost kernel: ip_conntrack version 2.1 (7168 buckets, 57344 max) - 308 bytes per conntrack
Nov 3 00:40:45 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team
Nov 3 00:40:45 localhost kernel: ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
Nov 3 00:40:45 localhost kernel: arp_tables: (C) 2002 David S. Miller
Nov 3 00:40:45 localhost kernel: NET: Registered protocol family 1
Nov 3 00:40:45 localhost kernel: NET: Registered protocol family 17
Nov 3 00:40:45 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 3 00:40:45 localhost kernel: ACPI wakeup devices:
Nov 3 00:40:45 localhost kernel: P0P4 BNIC MC97 USB1 USB2 USB3 USB4 EUSB PS2K
Nov 3 00:40:45 localhost kernel: ReiserFS: sda3: found reiserfs format "3.6" with standard journal
Nov 3 00:40:45 localhost kernel: usb 3-1: new full speed USB device using address 2
Nov 3 00:40:45 localhost kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
Nov 3 00:40:45 localhost kernel: ReiserFS: sda3: using ordered data mode
Nov 3 00:40:45 localhost kernel: ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Nov 3 00:40:45 localhost kernel: ReiserFS: sda3: checking transaction log (sda3)
Nov 3 00:40:45 localhost kernel: ReiserFS: sda3: Using r5 hash to sort names
Nov 3 00:40:45 localhost kernel: VFS: Mounted root (reiserfs filesystem) readonly.
Nov 3 00:40:45 localhost kernel: Mounted devfs on /dev
Nov 3 00:40:45 localhost kernel: Freeing unused kernel memory: 212k freed
Nov 3 00:40:45 localhost kernel: usb 3-2: new low speed USB device using address 3
Nov 3 00:40:45 localhost kernel: input: USB HID v1.00 Mouse [BTC USB Cordless Mouse] on usb-0000:00:1d.1-2
Nov 3 00:40:45 localhost kernel: HID device not claimed by input or hiddev
Nov 3 00:40:45 localhost kernel: usbhid: probe of 3-2:1.1 failed with error -5
Nov 3 00:40:45 localhost kernel: usb 5-1: new full speed USB device using address 2
Nov 3 00:40:45 localhost kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Nov 3 00:40:45 localhost kernel: Vendor: Generic Model: USB SD Reader Rev: 1.00
Nov 3 00:40:45 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 3 00:40:45 localhost kernel: SCSI device sdc: 498176 512-byte hdwr sectors (255 MB)
Nov 3 00:40:45 localhost kernel: sdc: assuming Write Enabled
Nov 3 00:40:45 localhost kernel: /dev/scsi/host3/bus0/target0/lun0: p1
Nov 3 00:40:45 localhost kernel: Attached scsi removable disk sdc at scsi3, channel 0, id 0, lun 0
Nov 3 00:40:45 localhost kernel: Attached scsi generic sg2 at scsi3, channel 0, id 0, lun 0, type 0
Nov 3 00:40:45 localhost kernel: Vendor: Generic Model: USB CF Reader Rev: 1.01
Nov 3 00:40:45 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 3 00:40:45 localhost kernel: Attached scsi removable disk sdd at scsi3, channel 0, id 0, lun 1
Nov 3 00:40:45 localhost kernel: Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 1, type 0
Nov 3 00:40:45 localhost kernel: Vendor: Generic Model: USB SM Reader Rev: 1.02
Nov 3 00:40:45 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 3 00:40:45 localhost kernel: Attached scsi removable disk sde at scsi3, channel 0, id 0, lun 2
Nov 3 00:40:45 localhost kernel: Attached scsi generic sg4 at scsi3, channel 0, id 0, lun 2, type 0
Nov 3 00:40:45 localhost kernel: Vendor: Generic Model: USB MS Reader Rev: 1.03
Nov 3 00:40:45 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 3 00:40:45 localhost kernel: Attached scsi removable disk sdf at scsi3, channel 0, id 0, lun 3
Nov 3 00:40:45 localhost kernel: Attached scsi generic sg5 at scsi3, channel 0, id 0, lun 3, type 0
Nov 3 00:40:45 localhost kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Nov 3 00:40:46 localhost lpd[1777]: restarted
Nov 3 00:41:01 localhost shutdown[1835]: shutting down for system reboot
Nov 3 00:41:05 localhost kernel: Kernel logging (proc) stopped.
Nov 3 00:41:05 localhost kernel: Kernel log daemon terminating.
Nov 3 00:41:05 localhost exiting on signal 15
OK; I fixed it. The only things I changed in the new compile was adding initrd support. I don't really understand how that solved the problem though. I've always thought that that's only used initally at bootup ...Ah well, it works now
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.
...Ah well, it works now 
