Download your favorite Linux distribution at LQ ISO.
Go Back > Forums > Linux Forums > Linux - General
User Name
Linux - General This Linux forum is for general Linux questions and discussion.
If it is Linux Related and doesn't seem to fit in any other forum then this is the place.


  Search this Thread
Old 10-19-2006, 01:01 AM   #1
LQ Newbie
Registered: Sep 2006
Posts: 9

Rep: Reputation: 0
Redboot commandline problem

Hi All,

Rebuilding RedBoot from the Configuration ToolTo rebuild RedBoot from the Configuration
Tool, open the template window (Build->Templates) and
select the appropriate Hardware target and in Packages select
"redboot". Then press OK. Depending on the platform, a number of
conflicts may need to be resolved before the build can be started;
select "Continue".
Import the desired RedBoot configuration file from the platform HAL
(File->Import...). Depending on the platform, a number of
conflicts may need to be resolved before the build can be started;
select "Continue". For example, if the platform selected is Hitachi
SE7751 board and the RAM configuration RedBoot should be built, import
the file
Save the configuration somewhere suitable with enough disk space
for building RedBoot (File->Save...). Choose the name according to
the RedBoot configuration, for example
Then start the build (Build->Library) and wait for it to
complete. The resulting RedBoot files will be in the associated
install directory, for the example this would be redboot_RAM_install/bin.

I imported redboot_Ram.ecc
my platform is package/hal/arm/arm9/scp

using above information I got redboot.elf file in my _install/bin/ folder. After I converted the redboot.elf file into redboot.bin file.
After I loaded binary file into my board at ram 0x30000. After I used go 0x30000
now I got the below redboot console.

But Not working any command on commandline and hanging problem also there.
Pls provide the solution.

My board is using u-boot. The console messege is given below

USCP# tftpboot redboot.bin 0x30000
Using port: EthA
RX Buf shift state: 0x01

Link: 10MB/s Full Duplex
TFTP from server; our IP address is
Filename 'redboot.bin'.
Load address: 0x30000
Loading: ############
Bytes transferred = 57340 (dffc hex)

USCP# go 0x30000
## Starting application at 0x00030000 ...

RedBoot(tm) bootstrap and debug environment [RAM]
Non-certified release, version UNKNOWN - built 14:17:04, Oct 18 2006

Platform: SCP system (ARM9)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited

RAM: 0x00000000-0x02000000, [0x00043948-0x02000000] available
RedBoot> history
RedBoot> help

Thanks & Regards
Srinivas Rao.Ch


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Commandline legth problem linking a shared library DavePrince Linux - Software 0 07-20-2005 09:19 AM
Embedded linux, ... REDBOOT . . . help ERBRMN Linux - General 0 06-11-2005 01:36 AM
Problem starting programs from commandline Error1312 Slackware 10 06-20-2004 10:16 AM
ndiswapper commandline mistype problem lnxusr Linux - Wireless Networking 11 03-04-2004 03:20 PM
ndiswrapper commandline problem lnxusr Linux - Software 2 01-10-2004 09:47 PM > Forums > Linux Forums > Linux - General

All times are GMT -5. The time now is 04:19 PM.

Main Menu
Write for LQ is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration