Qns on Bad partition when e2fsck used
 

Hi All,

I need your kind expertise.. hope someone can help.

We r using suse linux on some of the avionics equipment onboard the aircraft. We recently found that there seem to be some flash partition corruption on the flash drives of the pcs when we did a e2fsck command to check the partition. I am not quite sure if this is a genuine partition fault and if theres a explanation of this error report since everything functions good with no problem.
this partition is a read only partition and it still shows the pass 5 errors. What is actually causing this - power failure? is there anyway to prevent this from happening? this fault seems to be only happening on flash drives that we have on the pcs.


# fsck.ext2 /dev/hda6 -nf
e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
Warning! /dev/hda6 is mounted.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences: -230 -231 -232 -233 -234 -235 -236 -237 -238 -239 -240 -241 -242 -243 -244 -245 -246 -247 -248 -249 -250 -251 -252 -253 -254 -255 -256 -257 -258 -259 -260 -261 -262 -263 -264 -265 -266 -267 -268 -269 -270 -271 -272 -507 --600 -601 -602 -603 -604 -605 -606 -607 -608 -609 -610 -611 -612 -613 -614 -615 -616 -617 -618 -619 -620 -621 -622 -623 -624 -625 -626 -627 -628 -629 -630 -631 -632 -633 -634 -635 -636 -637 -638 -639 -58 -759 -760 -761 -762 -763 -764 -765 -766 -767 -768 -769 -770 -771 -772 -773 -774 -775 -776 -777 -778 -779 -780 -781 -782 -783 -784 -785 -786 -787 -788 -789 -790 -791 -792 -793 -794 -795 -796 -797 -798 -799 -800 -801 -802 -803 -804 -805 -806 -807 -808 -809 -810 -811 -812 -813 -814 -815 -816
Fix? no

/dev/hda6: 21/1504 files (9.5% non-contiguous), 1366/6016 blocks


Thanks in advance, hope someone can enlightened me.

Best Regards
Ron Kwong

Why are you trying to force (-f) this on a *mounted* partition in the first place?

hmm... without the -f force switch turned on, this mounted partition still gives the group summary errors. All other partitions are checked okay. Any idea why we are seeing this kind of pass 5 checking errors?

Thanks