LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - General
User Name
Password
Linux - General This Linux forum is for general Linux questions and discussion.
If it is Linux Related and doesn't seem to fit in any other forum then this is the place.

Notices


Reply
  Search this Thread
Old 12-22-2005, 11:54 PM   #1
CrashedAgain
Member
 
Registered: Jan 2004
Posts: 307

Rep: Reputation: 33
lost video acceleration


I just 'upgraded' from xfree86 to xorg & now I have no video acceleration. I have tried dpkg xorg-reconfigure & the settings all seem to be OK. Here is xorg.conf:

Code:
 xorg.conf (Xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
#   md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum
#   dpkg-reconfigure xserver-xorg

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"v4l"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"Generic Video Card"
	Driver		"i810"
	BusID		"PCI:0:1:0"
	VideoRam	16384
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
	HorizSync	28-49
	VertRefresh	43-72
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Generic Video Card"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection
here is the output from glxinfo:
Code:
crashedagain@desktop:~$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
    GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
    GLX_SGIX_visual_select_group
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
    GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
    GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
    GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
    GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
    GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
    GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
    GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
    GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
    GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
    GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
    GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x24 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x27 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x28 24 dc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x29 24 dc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x2a 24 dc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
crashedagain@desktop:~$
How do I get glx working with Xorg?
Or how do I trash Xorg so I can go back to Xfree86?

{rant} {rant} How come "upgrades" usually just louse things up...{Ok got that out of the way, feel slightly better now.
 
Old 12-23-2005, 12:20 AM   #2
davcefai
Member
 
Registered: Dec 2004
Location: Malta
Distribution: Debian Sid
Posts: 866

Rep: Reputation: 45
You have "Generic Video Card" installed! That isn't going to go anywhere.

You should still have /etc/XF86Config-4, installing xorg doesn't normally delete it. Examine the file, see what you have for your card, copy into xorg.conf and take it from there.

You may need to update or recompile the driver.
 
Old 12-23-2005, 09:26 AM   #3
CrashedAgain
Member
 
Registered: Jan 2004
Posts: 307

Original Poster
Rep: Reputation: 33
I think the "Generic Video Card" entry is just a label for the video cord which uses the i810 driver on the line below. However, I did dpkg reconfigure the xserver & entered i810 as the name of the video card. Functionally it made no difference. Here is what I have now:
Code:
Section "Device"
        Identifier      "i810"
        Driver          "i810"
        BusID           "PCI:0:1:0"
        VideoRam        16384
        Option          "UseFBDev"              "true"
EndSection

Section "Monitor"
        Identifier      "HP mx70"
        Option          "DPMS"
        HorizSync       28-49
        VertRefresh     43-72
EndSection
and from glxinfo
Code:
crashedagain@desktop:~$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT......
here is what was in XF86Config-4:
Code:
crashedagain@desktop:~$ cat /etc/X11/XF86Config-4
#Kanotix on hda8 XF86Config-4
Section "ServerLayout"
        Identifier     "XFree86 Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
# TouchPad not detected
EndSection

Section "ServerFlags"
        Option "AllowMouseOpenFail"  "true"

EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
        FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
        FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
        FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
#       FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
#       FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
        FontPath     "/usr/share/fonts/ttf/western"
        FontPath     "/usr/share/fonts/ttf/decoratives"
        FontPath     "/usr/share/fonts/truetype"
        FontPath     "/usr/share/fonts/truetype/openoffice"
        FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
        FontPath     "/usr/share/fonts/latex-ttf-fonts"
        FontPath     "/usr/X11R6/lib/X11/fonts/defoma/CID"
        FontPath     "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
        Load  "ddc"  # ddc probing of monitor
        Load  "GLcore"
        Load  "dbe"
        Load  "dri"
        Load  "extmod"
        Load  "glx"
        Load  "bitmap" # bitmap-fonts
        Load  "speedo"
        Load  "type1"
        Load  "freetype"
        Load  "record"
        Load "v4l"
# TouchPad not detected
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option      "CoreKeyboard"
        Option "XkbRules" "xfree86"
        Option "XkbModel" "pc105"
        Option "XkbLayout" "us"

EndSection

Section "InputDevice"
        Identifier  "Serial Mouse"
        Driver      "mouse"
        Option      "Protocol" "Microsoft"
        Option      "Device" "/dev/ttyS0"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier  "PS/2 Mouse"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
Option          "ZAxisMapping"          "4 5"
        Option      "Device" "/dev/psaux"
        Option      "Emulate3Buttons" "true"
        Option      "Emulate3Timeout" "70"
        Option      "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
        Option          "SendCoreEvents"
"true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

Section "InputDevice"
        Identifier      "TouchPad"
        Driver          "synaptics"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "LeftEdge"              "1700"
        Option          "RightEdge"             "5300"
        Option          "TopEdge"               "1700"
        Option          "BottomEdge"            "4200"
        Option          "FingerLow"             "25"
        Option          "FingerHigh"            "30"
        Option          "MaxTapTime"            "180"
        Option          "MaxTapMove"            "220"
        Option          "VertScrollDelta"       "100"
        Option          "MinSpeed"              "0.06"
        Option          "MaxSpeed"              "0.12"
        Option          "AccelFactor"           "0.0010"
        Option          "SHMConfig"             "on"
        Option          "Repeater"              "/dev/ps2mouse"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
        Identifier      "Monitor0"
        Option  "DPMS"  "true"
        VendorName      "HWP"
        ModelName       "HWP0503"
        HorizSync 30 - 70 # DDC-probed
        VertRefresh  50.0 - 75.0 # Very conservative. May flicker.
#       VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
        # These are the DDC-probed settings reported by your monitor.
        # 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
        ModeLine "1280x1024"    135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
        # 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
        {snip for brevity}
        ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
       # 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
       ModeLine "1680x1050"  147.14  1680 1784 1968 2256  1050 1051 1054 1087  -HSync +Vsync
       # 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 193.16 MHz
       ModeLine "1920x1200"  193.16  1920 2048 2256 2592  1200 1201 1204 1242  -HSync +Vsync
EndSection

Section "Device"
        ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
        Identifier  "Card0"
# Added by CrashedAgain:
        VideoRam 16384
        Option "DPMS"
#        Option "XaaNoPixmapCache"
        Option       "XaaNoOffscreenPixmaps"

# The following line is auto-generated by KNOPPIX mkxf86config
        Driver      "i810"
        VendorName  "All"
        BoardName   "All"
#       BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultColorDepth 16
        SubSection "Display"
                Depth     1
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     4
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     8
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     15
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     16
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     24
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth     32
                Modes "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Mode 0666
EndSection
crashedagain@desktop:~$
 
Old 12-23-2005, 11:30 AM   #4
davcefai
Member
 
Registered: Dec 2004
Location: Malta
Distribution: Debian Sid
Posts: 866

Rep: Reputation: 45
Have you examined the log file /var/log/Xorg.0.log?
 
Old 12-23-2005, 07:46 PM   #5
CrashedAgain
Member
 
Registered: Jan 2004
Posts: 307

Original Poster
Rep: Reputation: 33
...and there it was:

Code:
(**) I810(0): DRI is disabled because it runs only at 16-bit depth.
I had checked Xorg.log earlier but hadn't seen it.

Re-configured for 16 bit depth instead of 24 & dri is working now.

Thanks.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
SuSE 10 no video acceleration shingalated SUSE / openSUSE 4 11-22-2005 06:18 PM
video card harware acceleration CPUFreak91 Linux - Hardware 2 09-08-2005 08:39 AM
video card acceleration diamonds Linux - Newbie 5 05-14-2005 07:07 PM
Video Acceleration (10.0 Official) askjeffro Mandriva 1 06-01-2004 01:02 PM
WHY cant i get video acceleration V_LESTAT Linux - Newbie 16 02-25-2004 04:26 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - General

All times are GMT -5. The time now is 05:28 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration