LinuxQuestions.org - ioctl FBIOPUT_VSCREENINFO: Invalid argument.

- Linux - General (https://www.linuxquestions.org/questions/linux-general-1/)

- - ioctl FBIOPUT_VSCREENINFO: Invalid argument. (https://www.linuxquestions.org/questions/linux-general-1/ioctl-fbioput_vscreeninfo-invalid-argument-267631/)

Frame Buffer Problem !!!

I gave up on this one already. I was searching for a solutions but seems like i cannot find any so i decided to post this thread and ask for suggestions. I've checked every possible HOWTO but still nothing. Here is the situation.

Distro: Slackware-current Kernel: kernel-2.6.9 Video: Integrated i810

Everything worked just fine 15mins total kernel config+compile+tune up-=> voila everything's working just fine, BUT something is bothering me and i cannot fix it. The frame buffer resolution is working on "640x480-60" which is i suppose the lowest standard. It's kinda ugly to leave the resolution in console that low and i wanted to higher it a lil bit maybe up to 1024x768-70 but nope it didn't work. I've tried every single option in /etc/fb.mode but nothing. What i get after running fbset is:

<vladimir@localhost>$fbset 1024x768-70
ioctl FBIOPUT_VSCREENINFO: Invalid argument.
<vladimir@localhost>$fbset --all 1024x768-70
ioctl FBIOPUT_VSCREENINFO: Invalid argument.

Any ideas?

I believe that this is best done in your lilo.conf. See below:

Code:

# LILO configuration file

# generated by 'liloconfig'

#

# Start LILO global section

boot = /dev/hda

message = /boot/boot_message.txt

prompt

timeout = 200

# Override dangerous defaults that rewrite the partition table:

change-rules

  reset

# VESA framebuffer console @ 1024x768x256

vga = 773

# Normal VGA console

# vga = normal

# VESA framebuffer console @ 1024x768x64k

# vga=791

# VESA framebuffer console @ 1024x768x32k

# vga=790

# VESA framebuffer console @ 1024x768x256

# vga=773

# VESA framebuffer console @ 800x600x64k

# vga=788

# VESA framebuffer console @ 800x600x32k

# vga=787

# VESA framebuffer console @ 800x600x256

# vga=771

# VESA framebuffer console @ 640x480x64k

# vga=785

# VESA framebuffer console @ 640x480x32k

# vga=784

# VESA framebuffer console @ 640x480x256

# vga=769

# End LILO global section

You *should* have somethign that looks like the above in your lilo.conf. Just uncomment the line that matches the resolution that you want your frame buffer console to use, rerun lilo (i.e. type lilo as root) and restart.

:-)

slight

it should but it does not work -=> the only option that works is @ 640x480 for some reason. I was thinking maybe it's a hardware issue -=> i was told that i810 and the frame buffer don't work that well but i don't know, actually i was told that it doesn't work at all -=> still researching though so let's see

It is very possible that maybe that particular video adapter does not support frame buffers..... I don't know much about the i810 but I do know some adapters, especially on board adapters, do not include frame buffer support.

slight

Please do not post the same thread in more than one forum. Picking the most relevant forum and posting it once there makes it easier for other members to help you and keeps the discussion all in one place.

http://www.linuxquestions.org/rules.php

See Here: http://www.linuxquestions.org/questi...96#post1356596