I have installed RED HAT 9.0 and while booting i meet the following problem.

*pde = 00000000
Oops: 0000

CPU: 0

EIP: 0060: [<c010ab2c>] Not tainted

EFLAGS: 000100002


EIP is at disable_irq [kernel] 0x4c (2.4.20-8)

eax: 00000000 ebx: fffff680 ecx:ffffffed edx:c036ef80

esi: 00000283 edi: 00000000 ebp: ffffffed esp: dfeeff948

ds: 0068 es: 0068 ss: 0068

Process swapper (pid: 1,stackpage=dfef9000)

Stack: .......................

Call Trace : [<c01bd1fc>] probe_hwif [kernel] 0x27c (0xdfef9f54))

[<c01dbcd8>] ideprobe_init [kernel] 0xb8 (0xdfef9f74))


[<c0105053>] init [kernel] 0x13 (0xdfef9fd8))


[<c0105040>] init [kernel] 0x0 (0xdfef9fe0))
[<c010742d>] kernel_thread_helper [kernel] 0x5 (0xdfef9ff0))

code: ff 50 10 eb d0 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 90

<0>Kernel Panic: Attemped to kill init

The PC that I have has a motherboard Elite P4 2.6, the motherboard I have a hard disk IDE of 80G.

Any ideas?

Pls Help me onthis matter most urgent

pls mail me too at sathish_ibs@yahoo.co.in

It looks like there was a problem when probing your IDE controller. Can you give us some more info please:

- Were there any problems when you installed Redhat?
- Have you ever been able to boot successfully?
- Are there any other messages when the machine boots?
- Can you boot the system successfully with a live CD (Knoppix, etc.)?

Hopefully with more info the problem can be solved.

Also, please don't ask for email responses.

Iam able to boot windows properly . At the time of Redhat Installation there are no errors found. on Board there are 2 IDE one i used for hard drive as primary master and the other for cdrom as secondry master pls help on this to solve the problem

Hi all

I have a static ip given by isdn provider with a gateway i have configured my linux

but when i restart the machine i need to config again to connect to network

I use the command as follows

ifconfig eth0 down
ifconfig eth0 192.168.1.1 up
route add 192.168.0.1 eth0
route add default gw 192.168.0.1 eth0

then only i am able to connect to net

can any one suggest to make this default when i boot my machine