Hang on install: GeForce MX4 or DVI problem?
Hi everyone,
I got Dell'd today with an optiplex GX-270. I stuck the RH7.2 cd into the drive, and when it starts the install procedure, it hanges when probing ide1. Here's the list of messages (which I have to type in manually) ide: Assuming 33MHz PCI bus speed for PIO modes PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24db PCI_IDE: chipset revision 2 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaio, hdbio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddMA PCI_IDE: unknown IDE controller on PCI bus 00 devide fa, VID=8086, DID=24d1 PCI_IDE: chipset revision 2 PCI_IDE: 100% native mode on irq 9 ide2: BM-DMA at 0xfea0-0xfea7, BIOS settings: hdeMA, hdfio ide3: BM-DMA at 0xfea8-0xfeaf, BIOS settings: hdgMA, hdhio hdc: SAMSUNG CD-ROM SC-148C, ATAPI CD/DVD-ROM drive hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive hde: ST3120026AS, ATA DISK drive hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50) hdf: probing with STATUS(0x00) instead of ALTSTATUS(0x50) hdg: ST3120026AS, ATA DISK drive hdh: probing with STATUS(0x00) instead of ALTSTATUS(0x50) hdh: probing with STATUS(0x00) instead of ALTSTATUS(0x50) ide1 at 0x170-0x177, 0x376 on irq 15 And it hangs after sending that last string to the term. Is this due to the new DVI card that the monitor is using? I'm using a standard VGA monitor through an adapter to the DVI card. I tried doing the "text" install and "expert" install, but all hang at this point. Please help. I'm at my ropes end. MORE INFO: Hoping to win points with some who are willing to reply before I leave and buy a new graphics card, here's some more info: intel P4, 2.6 GHz, 800 MHz FSB, 512K cache 1.0 GB Non-ECC, 400 MHz DDR RAM (2-512) NVIDIA GeForce 4MX DVI/VGA card 2 120 GB STAT 7200 RPM drives with data burst cache Anyone??? kris |
bump
|
Nevermind guys. I can't wait any longer. Off to Fry's I go.
kris |
Well, burned redhat 8, tried it out, and no problems so far. Guess I had to upgrade after all. Wonder what it was.
kris |
All times are GMT -5. The time now is 07:29 PM. |