primus |
06-23-2003 10:31 AM |
fsck reiserfs and fsk ext3 errors
hey all, i am running Gentoo Linux and i tried to post in the gentoo forums, but i have had no success.
my original post is here and my system config is here so please feel free to check them out, though i will repost the main problem below:
Code:
* Checking root file system ...
fsck 1.33 (21-Apr-2003)
Failed to open the filesystem
If the partition table has no been changed, and the partition is valid and it really contains a reiserfs partition, then the superblock is corrupted and you need to run --rebuild-sb
Warning fsck.reiserfs for the device /dev/ataraid/disc0/part3 exited with signal 6
* Filesystem repaired ... [!!]
...then later down...
* Checking all file systems ...
fsck 1.33 (21-Apr-2003)
fsck.ext3: No such file or directory while trying to open /dev/ataraid/disc0/part1
/dev/ataraid/disc0/part1:
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it real does contain a ext2 filesystem (and not swap or ufs or something else) then the superblock is corrupt, and you may try running e2fsck with an alternate superblock.
e2fsck -b 8193 <device>
* File system errors corrected ... [!!]
that is what i get on bootup... i changed my fstab to:
Code:
...
/dev/ataradi/disc0/part1 /boot ext3 noauto,noatime 0 0
/dev/ataradi/disc0/part3 / reiserfs noatime 0 0
/dev/ataradi/disc0/part2 none swap sw 0 0
...
though i still recieve:
Code:
* Checking root file system ...
fsck 1.33 (21-Apr-2003)
Failed to open the filesystem
If the partition table has no been changed, and the partition is valid and it really contains a reiserfs partition, then the superblock is corrupted and you need to run --rebuild-sb
Warning fsck.reiserfs for the device /dev/ataraid/disc0/part3 exited with signal 6
* Filesystem repaired ... [!!]
the system seems to run normally... this is why i have been hesistant to do anything. should i worry about this error? if i leave it will it hurt me later on? has anyone seen or fixed this before?
thanks alot, any help would be great
|