LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - General (https://www.linuxquestions.org/questions/linux-general-1/)
-   -   dual booting fc2 and xp with xp on a sata drive (https://www.linuxquestions.org/questions/linux-general-1/dual-booting-fc2-and-xp-with-xp-on-a-sata-drive-260743/)

pjamell 11-29-2004 09:11 PM

dual booting fc2 and xp with xp on a sata drive
 
i have loaded fc2 on a 80gig ide drive on ide0 i also have a 120 gig sata drive that has windows xp on it fc says the sata drive is hd1 but also says in hardware browser that the drive is sda with partitions sda1 and sda2 extended .
any ways when i try and boot to windows it don't happen
need help.....

Bruce Hill 11-29-2004 09:38 PM

Welcome to LQ!

It's not exactly clear from your post but an sata drive will be
either /dev/sda or /dev/hde depending upon whether it's
recognized as a sata or pata drive. But /dev/hda will always
be a regular ata drive. IDE0 will have /dev/hda for the master
and /dev/hdb for the slave.

You need to give more information about your boot problem,
such as which boot loader you use (i.e. GrUB or LiLO) and
how you have them setup. So in your next post you should
include the output of /etc/lilo.conf or whatever file contains
the boot information for GrUB if you use it. You should also
post how you try to load, and what error message you get.

pjamell 11-29-2004 10:33 PM

extra booting info
 
grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
# kernel /vmlinuz-version ro root=/dev/hda2
# initrd /initrd-version.img
#boot=/dev/sda
default=2
timeout=20
splashimage=(hd0,0)/grub/splash.xpm.gz
title Fedora Core (2.6.5-1.358smp)
root (hd0,0)
kernel /vmlinuz-2.6.5-1.358smp ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.5-1.358smp.img
title Fedora Core-up (2.6.5-1.358)
root (hd0,0)
kernel /vmlinuz-2.6.5-1.358 ro root=LABEL=/ rhgb quiet
initrd /initrd-2.6.5-1.358.img
title Windows Xp
rootnoverify (hd1,0)
chainloader +1
# this device map was generated by anaconda
(fd0) /dev/fd0
(hd0) /dev/hda
(hd1) /dev/sda

rompt
timeout=50
default=sda1
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
lba32

image=/boot/vmlinuz-2.6.5-1.358smp
label=linux
initrd=/boot/initrd-2.6.5-1.358smp.img
read-only
append="rhgb quiet root=LABEL=/"

image=/boot/vmlinuz-2.6.5-1.358
label=linux-up
initrd=/boot/initrd-2.6.5-1.358.img
read-only
append="rhgb quiet root=LABEL=/"

other=/dev/sda1
label=WindowsXPPro
LABEL=/ / ext3 defaults 1 1
LABEL=/boot /boot ext3 defaults 1 2
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
/dev/hda3 swap swap defaults 0 0
/dev/cdrom /mnt/cdrom udf,iso9660 noauto,owner,kudzu,ro 0 0
i hope this more help as to why when i try to boot xp it just hangs and won't load and i have to reset system

Bruce Hill 11-29-2004 11:15 PM

Sorry, mate, but I never could figure out GrUB.


All times are GMT -5. The time now is 08:11 PM.