hi,
i have upgrade my debian kernel 2.4 to 2.6.8 by using apt. Then i get error cannot open
/dev/consloe Kernel panic: attemp to kill init. I search a bit and find solution. Change
fstab an grub menu.lst entries hdaX to sdaX then kernel is loaded. After that i notice that i didnot mount my cdroms. I cant solve this. There is no entry for cdroms under /dev
I boot ubuntu live and look for differences. Here my dmesg for ubuntu live and debian sarge.
Where is the problem
This is ubuntu live demsg and cdroms mount and working.
[4294669.737000 ] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294669.738000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.738000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.738000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294669.739000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.739000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294669.740000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.741000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294669.741000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294669.741000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.741000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.741000] mice: PS/2 mouse device common for all mice
[4294669.742000] EISA: Probing bus 0 at eisa.0
[4294669.742000] EISA: Detected 0 cards.
[4294669.742000] NET: Registered protocol family 2
[4294669.752000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.752000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[4294669.753000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.753000] TCP: Hash tables configured (established 262144 bind 65536)
[4294669.753000] TCP reno registered
[4294669.753000] TCP bic registered
[4294669.753000] NET: Registered protocol family 1
[4294669.753000] NET: Registered protocol family 8
[4294669.753000] NET: Registered protocol family 20
[4294669.753000] Using IPI Shortcut mode
[4294669.753000 ] ACPI wakeup devices:
[4294669.753000] USB1 USB2 USB3 USB4 EHCI CSAB ICHB PS2M PS2K MC9
[4294669.753000] ACPI: (supports S0 S1 S4 S5)
[4294669.753000] Freeing unused kernel memory: 288k freed
[4294669.766000 ] input: AT Translated Set 2 keyboard as /class/input/input0
[4294669.797000] vga16fb: initializing
[4294669.797000] vga16fb: mapped to 0xc00a0000
[4294669.906000] Console: switching to colour frame buffer device 80x25
[4294669.906000] fb0: VGA16 VGA frame buffer device
[4294671.023000] Capability LSM initialized
[4294671.055000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294671.545000] SCSI subsystem initialized
[4294671.546000] ACPI: bus type scsi registered
[4294671.546000] libata version 1.20 loaded.
[4294671.547000] ata_piix 0000:00:1f.2: version 1.05
[4294671.547000] ata_piix 0000:00:1f.2: combined mode detected (p=0, s=1)
[4294671.547000] ata_pci_init_one: pci_dev class+intf: 0x1018a
[4294671.547000] ata_pci_init_one: NO_LEGACY == 0
[4294671.547000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
[4294671.547000 ] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294671.547000] ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14[4294671.852000] ata1: dev 0 cfg 00:85c0 49:0b00 82:0000 83:4000 84:0000 85:0000 86:0000 87:0000 88:0407 93:0000
[4294671.852000] ata1: dev 0 ATAPI, max UDMA/33
[4294671.852000] ata_acpi_push_id: skipping for PATA mode
[4294672.006000] ata1: dev 1 cfg 00:8580 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 93:0000
[4294672.006000] ata1: dev 1 ATAPI, max UDMA/33
[4294672.006000] ata_acpi_push_id: skipping for PATA mode
[4294672.006000] ata1: dev 0 configured for UDMA/33
[4294672.007000] ata1: dev 1 configured for UDMA/33
[4294672.007000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.007000] pata_get_dev_handle: dev_handle: 0xdfff7f20, parent_handle: 0xdf950660
[4294672.007000] pata_get_dev_handle: for dev=0x1f.2 , addr=0x1f0002, parent=0xdff86a00, *handle=0xdfff7f20
[4294672.007000] do_drive_get_GTF: drive w/ adr=0: v: 0xdfff6940
[4294672.007000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node dfff65a0), AE_AML_OPERAND_VALUE
[4294672.007000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node dfff6900), AE_AML_OPERAND_VALUE
[4294672.007000] scsi0 : ata_piix
[4294672.007000] Vendor: HL-DT-ST Model: CD-RW GCE-8525B Rev: 1.01
[4294672.007000] Type: CD-ROM ANSI SCSI revision: 05
[4294672.010000] Vendor: _NEC Model: DVD_RW ND-3540A Rev: 1.01
[4294672.010000] Type: CD-ROM ANSI SCSI revision: 05
[4294672.011000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.011000] pata_get_dev_handle: dev_handle: 0xdfff7f20, parent_handle: 0xdf950660
[4294672.011000] pata_get_dev_handle: for dev=0x1f.2 , addr=0x1f0002, parent=0xdff86a00, *handle=0xdfff7f20
[4294672.011000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15[4294672.270000] ata2: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f 93:0000
[4294672.270000] ata2: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
[4294672.270000] ata_acpi_push_id: skipping for PATA mode
[4294672.273000] ata2: dev 1 cfg 00:0040 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:20ff 93:0000
[4294672.273000] ata2: dev 1 ATA-7, max UDMA7, 312581808 sectors: LBA48
[4294672.273000] ata_acpi_push_id: skipping for PATA mode
[4294672.273000] ata2: dev 0 configured for UDMA/133
[4294672.273000] ata2: dev 1 configured for UDMA/133
[4294672.273000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.273000] pata_get_dev_handle: dev_handle: 0xdfff7f20, parent_handle: 0xdf950660
[4294672.273000] pata_get_dev_handle: for dev=0x1f.2 , addr=0x1f0002, parent=0xdff86a00, *handle=0xdfff7f20
[4294672.273000] do_drive_get_GTF: drive w/ adr=0: v: 0xdfff6800
[4294672.273000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node dfff65a0), AE_AML_OPERAND_VALUE
[4294672.273000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node dfff67c0), AE_AML_OPERAND_VALUE
[4294672.274000] scsi1 : ata_piix
[4294672.274000] Vendor: ATA Model: ST380013AS Rev: 3.18
[4294672.274000] Type: Direct-Access ANSI SCSI revision: 05
[4294672.274000] Vendor: ATA Model: SAMSUNG HD160JJ Rev: WU10
[4294672.274000] Type: Direct-Access ANSI SCSI revision: 05
[4294672.274000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294672.274000] pata_get_dev_handle: dev_handle: 0xdfff7f20, parent_handle: 0xdf950660
[4294672.274000] pata_get_dev_handle: for dev=0x1f.2 , addr=0x1f0002, parent=0xdff86a00, *handle=0xdfff7f20
[4294672.292000] Driver 'sd' needs updating - please use bus_type methods
[4294672.309000] sr0: scsi3-mmc drive: 40x/52x writer cd/rw xa/form2 cdda tray
[4294672.309000 ] Uniform CD-ROM driver Revision: 3.20
[4294672.309000] sr 0:0:0:0: Attached scsi CD-ROM sr0
[4294672.318000] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[4294672.318000] sr 0:0:1:0: Attached scsi CD-ROM sr1
[4294672.336000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294672.336000] SCSI device sda: drive cache: write back
[4294672.340000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294672.340000] SCSI device sda: drive cache: write back
[4294672.340000] sda: sda1 sda2 < sda5 sda6 >
[4294672.384000] sd 1:0:0:0: Attached scsi disk sda
[4294672.385000] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
[4294672.386000] SCSI device sdb: drive cache: write back
[4294672.387000] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
[4294672.388000] SCSI device sdb: drive cache: write back
[4294672.388000 ] sdb: sdb1 sdb2 < sdb5 sdb6 >
[4294672.428000] sd 1:0:1:0: Attached scsi disk sdb
[4294672.821000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294672.821000] ide0: ports already in use, skipping probe
[ 4294672.821000] ide1: I/O resource 0x170-0x177 not free.
[4294672.821000] ide1: ports already in use, skipping probe
[4294672.916000] cdrom: open failed.
[4294673.970000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294674.012000] ISO 9660 Extensions: RRIP_1991A
[4294674.049000] loop: loaded (max 8 devices)
[4294674.060000] Registering unionfs 1.1.2
[4294674.123000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294707.994000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294707.994000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 169
[4294707.994000] PCI: Via IRQ fixup for 0000:02: 02.0, from 5 to 9
[4294708.000000] eth0: VIA Rhine III at 0x1cc00, 00:02:44:92:9b:46, IRQ 169.
[4294708.000000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[4294727.251000] sr 0:0:0:0: Attached scsi generic sg0 type 5
[4294727.251000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[4294727.251000] sd 1:0:0:0: Attached scsi generic sg2 type 0
[4294727.251000] sd 1:0:1:0: Attached scsi generic sg3 type 0
[4294727.265000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294728.158000] Linux agpgart interface v0.101 (c) Dave Jones
[4294728.260000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294728.279000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294728.480000 ] agpgart: Detected an Intel 865 Chipset.
[4294728.489000] agpgart: AGP aperture is 64M @ 0xf8000000
[4294728.563000] Real Time Clock Driver v1.12
[4294728.649000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
[4294728.798000] Floppy drive(s): fd0 is 1.44M
[4294728.813000] FDC 0 is a post-1991 82077
[4294729.186000] NET: Registered protocol family 17
[4294729.284000] hw_random: RNG not detected
[4294729.418000] parport: PnPBIOS parport detected.
[4294729.418000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294729.430000] ts: Compaq touchscreen protocol output
[4294729.713000] input: PC Speaker as /class/input/input2
[4294729.955000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177
[4294729.955000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294730.266000] intel8x0_measure_ac97_clock: measured 50846 usecs
[4294730.266000] intel8x0: clocking to 48000
[4294731.329000] Adding 2361484k swap on /dev/sdb6. Priority:-1 extents:1 across:2361484k
[4294731.635000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294731.635000 ] md: bitmap version 4.39
[4294732.037000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel@redhat.com
[4294734.166000] cdrom: open failed.
[4294752.153000] NET: Registered protocol family 10
[4294752.154000] lo: Disabled Privacy Extensions
[4294752.154000] IPv6 over IPv4 tunneling driver
[4294762.017000] ACPI: Power Button (FF) [PWRF]
[4294762.017000] ACPI: Power Button (CM) [PWRB]
[4294762.119000 ] ibm_acpi: ec object not found
[4294762.139000] pcc_acpi: loading...
[4294763.023000] eth0: no IPv6 routers present
[4294770.465000] [drm] Initialized drm 1.0.1 20051102
[4294770.666000] ACPI: PCI Interrupt 0000:01: 00.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294770.666000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[4294772.019000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294772.019000] agpgart: Putting AGP V3 device at 0000:00: 00.0 into 4x mode
[4294772.019000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[4294773.036000] lp0: using parport0 (interrupt-driven).
[4294773.079000] ppdev: user-space parallel port driver
[ 4294773.902000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294773.902000] apm: overridden by ACPI.
[4294776.433000] [drm] Setting GART location based on new memory map
[4294776.433000] [drm] Loading R300 Microcode
[4294776.433000] [drm] writeback test succeeded in 1 usecs
[4294778.588000] Bluetooth: Core ver 2.8
[4294778.588000] NET: Registered protocol family 31
[4294778.588000] Bluetooth: HCI device and connection manager initialized
[4294778.588000] Bluetooth: HCI socket layer initialized
[4294778.749000] Bluetooth: L2CAP ver 2.8
[4294778.749000] Bluetooth: L2CAP socket layer initialized
[4294779.005000] Bluetooth: RFCOMM socket layer initialized
[4294779.005000] Bluetooth: RFCOMM TTY layer initialized
[4294779.005000] Bluetooth: RFCOMM ver 1.7
[4296411.675000] cdrom: open failed.
[4296411.686000] cdrom: open failed.
[4296411.698000] cdrom: open failed.
[4296411.709000] cdrom: open failed.
[4296411.856000] cdrom: open failed.
[4296411.868000] cdrom: open failed.
[4296411.952000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4296411.983000] cdrom: open failed.
[4296412.485000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[4296412.485000] SGI XFS Quota Management subsystem
[4296412.521000] cdrom: open failed.
[4296412.532000] cdrom: open failed.
[4296412.548000] JFS: nTxBlock = 8192, nTxLock = 65536
[4296412.675000] cdrom: open failed.
[4296412.692000] cdrom: open failed.
[4296453.402000] cdrom: sr0: mrw address space DMA selected
[4296453.402000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[4296453.445000 ] UDF-fs: No VRS found
[4296453.487000] cdrom: sr0: mrw address space DMA selected
[4296453.488000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[4296453.519000] UDF-fs: No VRS found
[4296453.551000] cdrom: sr0: mrw address space DMA selected
[4296453.551000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[4296453.583000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4296453.585000] ISOFS: changing to secondary root
This is debian demsg.
Linux version 2.6.8-2-686 (horms@tabatha.lab.ultramonkey.org) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Tue Aug 16 13:22:48 UTC 2005
BIOS-provided physical RAM map:
639MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fba30
On node 0 totalpages: 393200
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 163824 pages, LIFO batch:16
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000f9e70
ACPI: RSDT (v001 AMIINT INTEL865 0x00000010 MSFT 0x00000097) @ 0x5fff0000
ACPI: FADT (v001 AMIINT INTEL865 0x00000011 MSFT 0x00000097) @ 0x5fff0030
ACPI: MADT (v001 AMIINT INTEL865 0x00000009 MSFT 0x00000097) @ 0x5fff00c0
ACPI: DSDT (v001 INTEL I865G 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
WARNING: NR_CPUS limit of 1 reached. Processor ignored.
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/sdb1 ro
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2827.169 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1551276k/1572800k available (1551k kernel code, 20404k reserved, 690k data, 148k init, 655296k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5603.32 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 05
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4528k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: Using ACPI for IRQ routing
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4528 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
ata_piix version 1.02
ata_piix: combined mode detected
ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
ata1: dev 0 cfg 49:0b00 82:0000 83:4000 84:0000 85:0000 86:0000 87:0000 88:0407
ata1: dev 0 ATAPI, max UDMA/33
ata1: dev 1 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata1: dev 1 ATAPI, max UDMA/33
ata1: dev 0 configured for UDMA/33
ata1: dev 1 configured for UDMA/33
scsi0 : ata_piix
Using anticipatory io scheduler
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata2: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
ata2: dev 1 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:20ff
ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata2: dev 0 configured for UDMA/133
ata2: dev 1 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: ST380013AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG HD160JJ Rev: WU10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host1/bus0/target0/lun0: p1 p2 < p5 p6 >
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host1/bus0/target1/lun0: p1 p2 < p5 p6 >
Attached scsi disk sdb at scsi1, channel 0, id 1, lun 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
ide1: I/O resource 0x170-0x177 not free.
ide1: ports already in use, skipping probe
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2361484k swap on /dev/sdb6. Priority:-1 extents:1
EXT3 FS on sdb1, internal journal
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
Capability LSM initialized
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
NTFS driver 2.1.15 [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 169
eth0: VIA Rhine III at 0xcc00, 00:02:44:92:9b:46, IRQ 169.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
Intel 810 + AC97 Audio, version 1.01, 13:45:23 Aug 16 2005
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH5 found at IO 0xe800 and 0xec00, MEM 0xffeffe00 and 0xffeffd00, IRQ 177
i810: Intel ICH5 mmio at 0xf8857e00 and 0xf88a2d00
i810_audio: Primary codec has ID 2
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 2
ac97_codec: AC97 codec, id: CMI97 (CMedia)
AC97 codec does not have proper volume support.
i810_audio: only 48Khz playback available.
i810_audio: AC'97 codec 2, new EID value = 0x05c6
i810_audio: AC'97 codec 2, DAC map configured, total channels = 6
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: Maximum main memory to use for agp memory: 1430M
agpgart: AGP aperture is 64M @ 0xf8000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hw_random: RNG not detected
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
USB Universal Host Controller Interface driver v2.2
Real Time Clock Driver v1.12
input: PC Speaker
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
inserting floppy driver for 2.6.8-2-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0300140(lo)
IPv6 over IPv4 tunneling driver
lp0: using parport0 (interrupt-driven).
NET: Registered protocol family 5
eth0: no IPv6 routers present
cdrom mount problem
