LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Linux From Scratch
User Name
Password
Linux From Scratch This Forum is for the discussion of LFS.
LFS is a project that provides you with the steps necessary to build your own custom Linux system.

Notices


Reply
  Search this Thread
Old 10-09-2017, 04:41 AM   #1
joakim12
Member
 
Registered: Nov 2003
Location: Estonia
Distribution: Estobuntu
Posts: 70

Rep: Reputation: 15
BLFS 8.1 Autoconf-2.13 executable file doesn't show up


Hei. I'm trying to compile Autoconf-2.13 from BLFS, but the executable file does not exist after installation and I have tried it many times to install
After installation tab command completion does not show autoconf-2.13

Code:
lfs [ ~/BLFS/8.1/autoconf-2.13 ]$ patch -Np1 -i ../autoconf-2.13-consolidated_fixes-1.patch
patching file acgeneral.m4
patching file acspecific.m4
patching file autoconf.sh
patching file autoconf.texi
patching file autoheader.sh
patching file autoupdate.sh
patching file configure
patching file Makefile.in
patching file testsuite/autoconf.s/syntax.exp
lfs [ ~/BLFS/8.1/autoconf-2.13 ]$ mv -v autoconf.texi autoconf213.texi
'autoconf.texi' -> 'autoconf213.texi'
lfs [ ~/BLFS/8.1/autoconf-2.13 ]$ rm -v autoconf.info
'autoconf.info' eemaldatud
lfs [ ~/BLFS/8.1/autoconf-2.13 ]$ ./configure --prefix=/usr --program-suffix=2.13
creating cache ./config.cache
checking for gm4... no
checking for gnum4... no
checking for m4... /usr/bin/m4
checking for mawk... no
checking for gawk... gawk
checking for perl... /usr/bin/perl
checking for a BSD compatible install... /usr/bin/install -c
updating cache ./config.cache
creating ./config.status
creating Makefile
creating testsuite/Makefile
lfs [ ~/BLFS/8.1/autoconf-2.13 ]$ make check
rm -f autoconf autoconf.tmp
sed -e 's,@''datadir''@,--prefix/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/usr/bin/m4,g'  -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoconf.sh > autoconf.tmp && chmod +x autoconf.tmp && mv autoconf.tmp autoconf
rm -f autoheader autoheader.tmp
sed -e 's,@''datadir''@,--prefix/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/usr/bin/m4,g'  -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoheader.sh > autoheader.tmp && chmod +x autoheader.tmp && mv autoheader.tmp autoheader
rm -f autoreconf autoreconf.tmp
sed -e 's,@''datadir''@,--prefix/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/usr/bin/m4,g'  -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoreconf.sh > autoreconf.tmp && chmod +x autoreconf.tmp && mv autoreconf.tmp autoreconf
rm -f autoupdate autoupdate.tmp
sed -e 's,@''datadir''@,--prefix/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/usr/bin/m4,g'  -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' autoupdate.sh > autoupdate.tmp && chmod +x autoupdate.tmp && mv autoupdate.tmp autoupdate
rm -f ifnames ifnames.tmp
sed -e 's,@''datadir''@,--prefix/usr/share/autoconf-2.13,g' -e 's,@''M4''@,/usr/bin/m4,g'  -e 's,@''AWK''@,gawk,g' -e 's,@''SHELL''@,/bin/sh,g' ifnames.sh > ifnames.tmp && chmod +x ifnames.tmp && mv ifnames.tmp ifnames
rm -f autoscan autoscan.tmp
sed -e 's,@''datadir''@,--prefix/usr/share/autoconf-2.13,g' -e 's,@''PERL''@,/usr/bin/perl,g' autoscan.pl > autoscan.tmp && chmod +x autoscan.tmp && mv autoscan.tmp autoscan
freezing autoconf.m4
freezing autoheader.m4
makeinfo -I. ./autoconf213.texi --no-split --output=autoconf213.info
./autoconf213.texi:3929: warning: @xref node name should not contain `.'
rootme=`pwd`; srcrootme=`cd .; pwd`; \
test -r install-sh || cp ./install-sh .; \
cd testsuite && make check AUTOCONF=$rootme/autoconf \
AUTOCONFFLAGS="-m $srcrootme"
make[1]: Entering directory '/home/lfs/BLFS/8.1/autoconf-2.13/testsuite'
Making a new site.exp file...
runtest
WARNING: Couldn't find the global config file.
WARNING: Couldn't find tool init file
Test run by lfs on Mon Oct  9 12:22:42 2017
Native configuration is x86_64-pc-linux-gnu

		=== autoconf tests ===

Schedule of variations:
    unix

Running target unix
Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target.
Using /usr/share/dejagnu/config/unix.exp as generic interface file for target.
Using ./config/unix.exp as tool-and-target-specific interface file.
Running ./autoconf.g/init.exp ...
Running ./autoconf.g/sizeof.exp ...
Running ./autoconf.s/defines.exp ...
Checking acspecific.m4 for definitions of symbols in acconfig.h...
_ALL_SOURCE
C_ALLOCA
__CHAR_UNSIGNED__
CLOSEDIR_VOID
const
CRAY_STACKSEG_END
FAIL: CRAY_STACKSEG_END, not defined
DGUX
DIRENT
GETGROUPS_T
FAIL: GETGROUPS_T, not defined
GETLOADAVG_PRIVILEGED
GETPGRP_VOID
gid_t
HAVE_ALLOCA
HAVE_ALLOCA_H
HAVE_DOPRNT
HAVE_FNMATCH
HAVE_GETLOADAVG
HAVE_GETMNTENT
HAVE_LONG_DOUBLE
HAVE_LONG_FILE_NAMES
HAVE_MMAP
HAVE_RESTARTABLE_SYSCALLS
HAVE_ST_BLKSIZE
HAVE_ST_BLOCKS
HAVE_STRCOLL
HAVE_ST_RDEV
HAVE_STRFTIME
HAVE_STRINGIZE
HAVE_SYS_WAIT_H
HAVE_TM_ZONE
HAVE_TZNAME
HAVE_UNISTD_H
HAVE_UTIME_NULL
HAVE_VFORK_H
HAVE_VPRINTF
HAVE_WAIT3
inline
INT_16_BITS
LONG_64_BITS
MAJOR_IN_MKDEV
MAJOR_IN_SYSMACROS
_MINIX
mode_t
NDIR
NEED_MEMORY_H
NLIST_NAME_UNION
NLIST_STRUCT
NO_MINUS_C_MINUS_O
F77_NO_MINUS_C_MINUS_O
off_t
pid_t
_POSIX_1_SOURCE
_POSIX_SOURCE
RETSIGTYPE
FAIL: RETSIGTYPE, not defined
SELECT_TYPE_ARG1
FAIL: SELECT_TYPE_ARG1, not defined
SELECT_TYPE_ARG234
FAIL: SELECT_TYPE_ARG234, not defined
SELECT_TYPE_ARG5
FAIL: SELECT_TYPE_ARG5, not defined
SETPGRP_VOID
SETVBUF_REVERSED
size_t
STACK_DIRECTION
FAIL: STACK_DIRECTION, not defined
STAT_MACROS_BROKEN
STDC_HEADERS
SVR4
SYSDIR
SYSNDIR
SYS_SIGLIST_DECLARED
TIME_WITH_SYS_TIME
TM_IN_SYS_TIME
uid_t
UMAX
UMAX4_3
USG
vfork
VOID_CLOSEDIR
WORDS_BIGENDIAN
X_DISPLAY_MISSING
YYTEXT_POINTER
Checking acconfig.h for symbols defined in acspecific.m4...
NO_MINUS_C_MINUS_O
F77_NO_MINUS_C_MINUS_O
YYTEXT_POINTER
STDC_HEADERS
HAVE_UNISTD_H
USG
NEED_MEMORY_H
MAJOR_IN_MKDEV
MAJOR_IN_SYSMACROS
DIRENT
SYSNDIR
SYSDIR
NDIR
VOID_CLOSEDIR
STAT_MACROS_BROKEN
SYS_SIGLIST_DECLARED
HAVE_SYS_WAIT_H
uid_t
gid_t
size_t
pid_t
off_t
mode_t
CLOSEDIR_VOID
HAVE_FNMATCH
HAVE_MMAP
GETPGRP_VOID
SETPGRP_VOID
HAVE_VPRINTF
HAVE_DOPRNT
HAVE_VFORK_H
vfork
HAVE_WAIT3
HAVE_ALLOCA_H
HAVE_ALLOCA
C_ALLOCA
HAVE_GETLOADAVG
DGUX
SVR4
UMAX
UMAX4_3
UMAX
NLIST_STRUCT
NLIST_NAME_UNION
GETLOADAVG_PRIVILEGED
HAVE_UTIME_NULL
HAVE_STRCOLL
SETVBUF_REVERSED
HAVE_GETMNTENT
HAVE_STRFTIME
HAVE_STRFTIME
TIME_WITH_SYS_TIME
TM_IN_SYS_TIME
HAVE_TM_ZONE
HAVE_TZNAME
HAVE_ST_BLOCKS
HAVE_ST_BLKSIZE
HAVE_ST_RDEV
__CHAR_UNSIGNED__
HAVE_LONG_DOUBLE
INT_16_BITS
LONG_64_BITS
WORDS_BIGENDIAN
inline
const
HAVE_STRINGIZE
HAVE_LONG_FILE_NAMES
HAVE_RESTARTABLE_SYSCALLS
X_DISPLAY_MISSING
_ALL_SOURCE
_POSIX_SOURCE
_POSIX_1_SOURCE
_MINIX
_POSIX_SOURCE
Running ./autoconf.s/syntax.exp ...
Checking for syntax errors in the specific tests...
AC_PROG_ECHO_N
AC_PROG_CC
AC_PROG_CXX
AC_PROG_CXX_EXIT_DECLARATION
AC_PROG_CC_WORKS
AC_PROG_CXX_WORKS
AC_PROG_CC_GNU
AC_PROG_CXX_GNU
AC_PROG_CC_G
AC_PROG_CXX_G
AC_PROG_GCC_TRADITIONAL
AC_PROG_CC_C_O
AC_PROG_MAKE_SET
AC_PROG_RANLIB
AC_PROG_AWK
AC_PROG_YACC
AC_PROG_CPP
AC_PROG_CXXCPP
AC_REQUIRE_CPP
AC_PROG_LEX
AC_DECL_YYTEXT
AC_PROG_INSTALL
AC_PROG_LN_S
AC_HEADER_STDC
AC_UNISTD_H
AC_USG
AC_MEMORY_H
AC_HEADER_MAJOR
AC_HEADER_DIRENT
AC_CHECK_HEADER_DIRENT
AC_DIR_HEADER
AC_HEADER_STAT
AC_DECL_SYS_SIGLIST
AC_HEADER_SYS_WAIT
AC_TYPE_GETGROUPS
AC_TYPE_UID_T
AC_TYPE_SIZE_T
AC_TYPE_PID_T
AC_TYPE_OFF_T
AC_TYPE_MODE_T
AC_TYPE_SIGNAL
AC_FUNC_CLOSEDIR_VOID
AC_FUNC_FNMATCH
AC_FUNC_MMAP
AC_FUNC_GETPGRP
AC_FUNC_SETPGRP
AC_FUNC_VPRINTF
AC_FUNC_VFORK
AC_FUNC_WAIT3
AC_FUNC_ALLOCA
AC_FUNC_UTIME_NULL
AC_FUNC_STRCOLL
AC_FUNC_SETVBUF_REVERSED
AC_FUNC_GETMNTENT
AC_FUNC_STRFTIME
AC_FUNC_MEMCMP
AC_FUNC_SELECT_ARGTYPES
AC_HEADER_TIME
AC_STRUCT_TM
AC_STRUCT_TIMEZONE
AC_STRUCT_ST_BLOCKS
AC_STRUCT_ST_BLKSIZE
AC_STRUCT_ST_RDEV
AC_C_CROSS
AC_C_CHAR_UNSIGNED
AC_C_LONG_DOUBLE
AC_INT_16_BITS
AC_LONG_64_BITS
AC_C_BIGENDIAN
AC_C_INLINE
AC_C_CONST
AC_C_STRINGIZE
AC_OBJEXT
AC_SYS_INTERPRETER
AC_SYS_LONG_FILE_NAMES
AC_SYS_RESTARTABLE_SYSCALLS
AC_PATH_X
AC_PATH_X_XMKMF
AC_PATH_X_DIRECT
AC_PATH_XTRA
AC_CYGWIN32
AC_CYGWIN
AC_MINGW32
AC_EXEEXT
AC_AIX
AC_MINIX
AC_ISC_POSIX
AC_XENIX_DIR
AC_DYNIX_SEQ
AC_IRIX_SUN
AC_SCO_INTL

		=== autoconf Summary ===

# of expected passes		238
# of unexpected failures	7
/home/lfs/BLFS/8.1/autoconf-2.13/autoconf version 2.13

make[1]: *** [Makefile:44: check] Error 1
make[1]: Leaving directory '/home/lfs/BLFS/8.1/autoconf-2.13/testsuite'
make: *** [Makefile:131: check] Error 2
lfs [ ~/BLFS/8.1/autoconf-2.13 ]$ sudo make install
/bin/sh ./mkinstalldirs /--prefix/usr/bin /--prefix/usr/share/info /--prefix/usr/share/autoconf-2.13
for p in autoconf autoheader autoreconf autoupdate ifnames ; do \
  /usr/bin/install -c $p /--prefix/usr/bin/`echo $p|sed 's,$,--program-suffix2.13,; '`; \
done
for i in autoconf.m4f autoheader.m4f; do \
  /usr/bin/install -c -m 644 $i /--prefix/usr/share/autoconf-2.13/$i; \
done
for i in autoconf.m4 acgeneral.m4 acoldnames.m4 acspecific.m4 autoheader.m4 acconfig.h; do \
  /usr/bin/install -c -m 644 ./$i /--prefix/usr/share/autoconf-2.13/$i; \
done
if test -f autoscan; then \
/usr/bin/install -c autoscan /--prefix/usr/bin/`echo autoscan|sed 's,$,--program-suffix2.13,; '`; \
for i in acfunctions acheaders acidentifiers acprograms \
  acmakevars; do \
/usr/bin/install -c -m 644 ./$i /--prefix/usr/share/autoconf-2.13/$i; \
done; \
else :; fi
lfs [ ~/BLFS/8.1/autoconf-2.13 ]$ sudo install -v -m644 autoconf213.info /usr/share/info
'/usr/share/info/autoconf213.info' eemaldatud
'autoconf213.info' -> '/usr/share/info/autoconf213.info'
lfs [ ~/BLFS/8.1/autoconf-2.13 ]$ sudo install-info --info-dir=/usr/share/info autoconf213.info

Last edited by joakim12; 10-09-2017 at 04:58 AM.
 
Old 10-09-2017, 05:45 AM   #2
hazel
Senior Member
 
Registered: Mar 2016
Location: Harrow, UK
Distribution: Debian, Crux, LFS, AntiX, NuTyX
Posts: 1,952
Blog Entries: 4

Rep: Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847
It's called autoconf2.13. There's no underline. Try ls /usr/bin|grep autoconf and you should see it.
 
Old 10-09-2017, 07:22 AM   #3
joakim12
Member
 
Registered: Nov 2003
Location: Estonia
Distribution: Estobuntu
Posts: 70

Original Poster
Rep: Reputation: 15
If tab command completion does not show autoconf-2.13, then there is no autoconf-2.13.

Code:
lfs [ ~ ]$ ls /usr/bin/ | grep autoconf
autoconf
lfs [ ~ ]$
BLFS book 8.1 says autoconf 2.13 binary name as autoconf-2.13 with hyphen. If there should not be an hyphen then there is a bug in book. Look in Contents and Short Descriptions.
 
Old 10-09-2017, 07:32 AM   #4
hazel
Senior Member
 
Registered: Mar 2016
Location: Harrow, UK
Distribution: Debian, Crux, LFS, AntiX, NuTyX
Posts: 1,952
Blog Entries: 4

Rep: Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847
Oops! Mine is called autoconf2.13, so maybe I made a mistake when building it. On the other hand the one on my old LFS is also called autoconf2.13. The point is it's there in both systems and I could build FF with it (which I presume is what you want it for).

Your grep shows that it hasn't installed. Are you sure you did a sudo make install after running the tests? It's easy to forget that final step. I've done it once or twice myself.
 
Old 10-09-2017, 07:42 AM   #5
joakim12
Member
 
Registered: Nov 2003
Location: Estonia
Distribution: Estobuntu
Posts: 70

Original Poster
Rep: Reputation: 15
The code from my first post shows a full log of autoconf-2.13 installation and there is also an output from sudo make install and it went okey, without any errors.

Last edited by joakim12; 10-09-2017 at 08:39 AM.
 
Old 10-09-2017, 09:50 AM   #6
hazel
Senior Member
 
Registered: Mar 2016
Location: Harrow, UK
Distribution: Debian, Crux, LFS, AntiX, NuTyX
Posts: 1,952
Blog Entries: 4

Rep: Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847
The install script that you quote creates /usr/bin/autoconf2.13. That isn't an error, it's the way the script works. All the tools in /usr/bin have that same suffix. On the other hand, the directory in /usr/share is called autoconf-2.13. Do you have that directory? Do you have /usr/share/info/autoconf213.info?

I agree that your install looks as if it has gone successfully. The point is that the files it is supposed to create have very inconsistent names. You'd never guess them in a month of Sundays! Can you please check for the exact names I have given?
 
Old 10-09-2017, 10:06 AM   #7
joakim12
Member
 
Registered: Nov 2003
Location: Estonia
Distribution: Estobuntu
Posts: 70

Original Poster
Rep: Reputation: 15
These are the files I have:

Code:
lfs [ ~ ]$ ls /usr/bin/ | grep autoconf
autoconf
lfs [ ~ ]$ ls /usr/share/ | grep autoconf
autoconf
lfs [ ~ ]$ ls /usr/share/info/ | grep autoconf
autoconf213.info
autoconf.info
 
Old 10-09-2017, 10:45 AM   #8
hazel
Senior Member
 
Registered: Mar 2016
Location: Harrow, UK
Distribution: Debian, Crux, LFS, AntiX, NuTyX
Posts: 1,952
Blog Entries: 4

Rep: Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847
So you have the info file, which you put in by hand, but not the ones the install script should have put in for you. Weird!

I suggest that you go back into the source directory and try doing the install again (just the install, not the tests). Multiple installs from the same build never do any harm.

Looking back again at your code, I can see something odd about the install. The commands are there but not their outcomes. If doing it again doesn't help, then I've run out of ideas!
 
Old 10-09-2017, 11:05 AM   #9
joakim12
Member
 
Registered: Nov 2003
Location: Estonia
Distribution: Estobuntu
Posts: 70

Original Poster
Rep: Reputation: 15
I tried to reinstall autoconf-2.13 without tests and it did not help me. I already have tried many times to reinstall autoconf-2.13, but no luck. As I recall the firs time I installed autoconf-2.13 I made some type somewhere. Maybe that install messed something up, but I don't think so.
 
Old 10-09-2017, 02:24 PM   #10
Keith Hedger
Senior Member
 
Registered: Jun 2010
Location: Wiltshire, UK
Distribution: Linux From Scratch, Slackware64, Partedmagic
Posts: 2,582

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
If you want to see what is getting installed you can ususally use DESTDIR eg:
Code:
 make install DESTDIR=/tmp/x
this will install into /tmp/x ( obviously ) and allows you to see exactly what got installed and where without all the systems stuf getting in the way, then if all is well or after correcting any configure mistakes ie missing out --prefix=/usr, and so installing to the default /usr/local, you can then do a proper install, FYI installing into /tmp/x as a check can be done as a normal user you odon't need root privileges.
 
Old 10-10-2017, 05:12 AM   #11
joakim12
Member
 
Registered: Nov 2003
Location: Estonia
Distribution: Estobuntu
Posts: 70

Original Poster
Rep: Reputation: 15
After make install DESTDIR=/tmp/x I got the picture where it is installing.

Code:
lfs [ /--prefix/usr/bin ]$ ll
kokku 56K
drwxr-xr-x 2 root root 4,0K  9. okt   21:59 .
drwxr-xr-x 4 root root 4,0K  8. okt   00:28 ..
-rwxr-xr-x 1 root root 5,1K  9. okt   21:59 autoconf--program-suffix2.13
-rwxr-xr-x 1 root root 8,5K  9. okt   21:59 autoheader--program-suffix2.13
-rwxr-xr-x 1 root root 6,0K  9. okt   21:59 autoreconf--program-suffix2.13
-rwxr-xr-x 1 root root 9,4K  9. okt   21:59 autoscan--program-suffix2.13
-rwxr-xr-x 1 root root 3,3K  9. okt   21:59 autoupdate--program-suffix2.13
-rwxr-xr-x 1 root root 2,8K  9. okt   21:59 ifnames--program-suffix2.13
lfs [ /--prefix/usr/share ]$ ll
kokku 16K
drwxr-xr-x 4 root root 4,0K  8. okt   00:28 .
drwxr-xr-x 4 root root 4,0K  8. okt   00:28 ..
drwxr-xr-x 2 root root 4,0K  9. okt   21:59 autoconf-2.13
drwxr-xr-x 2 root root 4,0K  8. okt   00:28 info
Look at the directory tree, and filenames. Thats weird. I think that the problem is in ./configure --prefix=/usr --program-suffix=2.13, but I dont know where.

I'm using GPM-1.20.7 and Lynx-2.8.8rel.2 to copy the command from one prompt to another.
 
Old 10-10-2017, 06:39 AM   #12
hazel
Senior Member
 
Registered: Mar 2016
Location: Harrow, UK
Distribution: Debian, Crux, LFS, AntiX, NuTyX
Posts: 1,952
Blog Entries: 4

Rep: Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847
Those are exactly the names that I got. They aren't the same as the ones in the book.
 
Old 10-10-2017, 06:40 AM   #13
Keith Hedger
Senior Member
 
Registered: Jun 2010
Location: Wiltshire, UK
Distribution: Linux From Scratch, Slackware64, Partedmagic
Posts: 2,582

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
this install looks totally fubar'ed, do an uninstall without the DESTDIR= bit then delete the source folder, untar a fresh archive and start again you should get a file structure like this
Code:
/usr/
/usr/bin/
/usr/bin/autoconf2.13
/usr/bin/autoheader2.13
/usr/bin/autoreconf2.13
/usr/bin/autoupdate2.13
/usr/bin/ifnames2.13
/usr/bin/autoscan2.13
/usr/share/
/usr/share/info/
/usr/share/info/autoconf213.info
/usr/share/info/dir
/usr/share/autoconf-2.13/
/usr/share/autoconf-2.13/autoconf.m4f
/usr/share/autoconf-2.13/autoheader.m4f
/usr/share/autoconf-2.13/autoconf.m4
/usr/share/autoconf-2.13/acgeneral.m4
/usr/share/autoconf-2.13/acoldnames.m4
/usr/share/autoconf-2.13/acspecific.m4
/usr/share/autoconf-2.13/autoheader.m4
/usr/share/autoconf-2.13/acconfig.h
/usr/share/autoconf-2.13/acfunctions
/usr/share/autoconf-2.13/acheaders
/usr/share/autoconf-2.13/acidentifiers
/usr/share/autoconf-2.13/acprograms
/usr/share/autoconf-2.13/acmakevars

Last edited by Keith Hedger; 10-10-2017 at 06:55 AM.
 
Old 10-10-2017, 06:43 AM   #14
Keith Hedger
Senior Member
 
Registered: Jun 2010
Location: Wiltshire, UK
Distribution: Linux From Scratch, Slackware64, Partedmagic
Posts: 2,582

Rep: Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649Reputation: 649
Just checked my build script and it is exactly as in the book so those commands should work
 
Old 10-10-2017, 07:02 AM   #15
hazel
Senior Member
 
Registered: Mar 2016
Location: Harrow, UK
Distribution: Debian, Crux, LFS, AntiX, NuTyX
Posts: 1,952
Blog Entries: 4

Rep: Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847Reputation: 847
My build and install went smoothly and those are the names I got. However the book lists the contents of this package as tools of the form /usr/bin/tool-2.13, not /usr/bin/tool2.13. That is partly what has caused all this confusion.

The book should be modified to show the correct names.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
autoconf to show error and stop when AC_PROG is missing RudraB Programming 1 05-29-2013 01:14 PM
ls -a doesn't show the file that exists pratapmaddi Linux - Newbie 3 09-10-2009 09:31 AM
mounted drive doesn't show up in /mnt file linux hates me Linux - Networking 1 05-28-2009 05:41 PM
threads doesn't show words in text file lp_s Linux - Newbie 2 05-13-2009 12:11 AM
*** YOU'RE USING autoconf (GNU Autoconf) 2.60. KDE requires autoconf 2.52, 2.53 or 2. arubin Slackware 6 09-24-2008 03:31 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Linux From Scratch

All times are GMT -5. The time now is 03:22 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration