I have compiled my own kernel image, following this page from Raspberry:
https://www.raspberrypi.org/document...el/building.md
Now I have a zImage in .../arch/arm/boot/zImage, but I can't emulate this image with qemu-system-arm.
I use this command line to emulate zImage.
qemu-system-arm -kernel arch/arm/boot/zImage -cpu arm1176 -m 256 -M versatilepb -no-reboot -serial stdio -append "console=ttyS0,115200"
When I run this command, a Blank screen open and when i see
htop output, a cpu is working.
I know that the aforementioned command has no rootfs (i.e. any -hda parameter are not specified). It should display some message on the console, which is results in a kernel panic, but
it display anything.