PrayingMantis |
02-10-2012 07:30 AM |
NTPD exits after time reset
Hi,
I use ntpdate before starting ntpd on my board, however, as soon as the time is synchronized with the NTP server, ntpd exits silently with no messages in the logs :
Code:
root@myServer:/# cat /var/log/messages | grep ntp
Feb 10 13:10:16 NOTICE ntpdate[974]: step time server 192.168.29.211 offset 5.610707 sec
Feb 10 13:10:17 NOTICE ntpd[985]: ntpd 4.2.4p0@1.1472-o Thu Jan 6 11:12:03 UTC 2011 (1)
Feb 10 13:10:17 INFO /etc/init.d/ntpd: ntpd startup - OK
Feb 10 13:10:17 INFO ntpd[986]: precision = 10.895 usec
Feb 10 13:10:17 INFO ntpd[986]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Feb 10 13:10:17 INFO ntpd[986]: Listening on interface #1 lo, 127.0.0.1#123 Enabled
Feb 10 13:10:17 INFO ntpd[986]: Listening on interface #2 eth0, 192.168.29.200#123 Enabled
Feb 10 13:10:17 INFO ntpd[986]: kernel time sync status 0040
Feb 10 13:12:15 INFO watchdog[1292]: pidfile: /var/run/ntpd.pid
Feb 10 13:13:32 INFO ntpd[986]: synchronized to 192.168.29.211, stratum 11
Feb 10 13:13:32 NOTICE ntpd[986]: kernel time sync enabled 0001
Feb 10 13:28:39 NOTICE ntpd[986]: time reset +0.215637 s
Feb 10 13:28:45 ERROR watchdog[1292]: pinging process 986 (/var/run/ntpd.pid) gave errno = 3 = 'No such process'
Feb 10 13:28:45 INFO watchdog: Watchdog restarted ntpd
Feb 10 13:28:45 ERROR /etc/init.d/ntpd: ntpd shutdown - FAILED
Feb 10 13:28:46 NOTICE ntpd[1624]: ntpd 4.2.4p0@1.1472-o Thu Jan 6 11:12:03 UTC 2011 (1)
Feb 10 13:28:46 INFO ntpd[1625]: precision = 10.895 usec
Feb 10 13:28:46 INFO ntpd[1625]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Feb 10 13:28:46 INFO ntpd[1625]: Listening on interface #1 lo, 127.0.0.1#123 Enabled
Feb 10 13:28:46 INFO ntpd[1625]: Listening on interface #2 eth0, 192.168.29.200#123 Enabled
Feb 10 13:28:46 INFO ntpd[1625]: kernel time sync status 0040
Feb 10 13:28:46 INFO /etc/init.d/ntpd: ntpd startup - OK
Feb 10 13:32:01 INFO ntpd[1625]: synchronized to 192.168.29.211, stratum 11
Feb 10 13:32:01 NOTICE ntpd[1625]: kernel time sync enabled 0001
Every time I observe a "time reset" message in the log, the ntpd process gets killed somehow however the PID file still exits. I don't have any idea why is this happening. Here are the contents of my ntp.conf file :
Code:
driftfile /var/lib/ntp/drift
restrict 0.0.0.0 mask 0.0.0.0 noserve
server 192.168.29.211 prefer
restrict 192.168.29.211 mask 255.255.255.255 nomodify notrap noquery
I use the following command to start ntpd on my board:
Code:
ntpd -u ntp:ntp -p /var/run/ntpd.pid -g
The debug info shows the following:
Code:
ntpq> as
ind assID status conf reach auth condition last_event cnt
===========================================================
1 51965 9014 yes yes none reject reachable 1
ntpq> rv 51965
assID=51965 status=9014 reach, conf, 1 event, event_reach,
srcadr=192.168.29.211, srcport=123, dstadr=192.168.29.200, dstport=123,
leap=00, stratum=11, precision=-20, rootdelay=0.000,
rootdispersion=11.093, refid=LOCAL(0), reach=007, unreach=0, hmode=3,
pmode=4, hpoll=6, ppoll=6, flash=400 peer_dist, keyid=0, ttl=0,
offset=-0.314, delay=1.119, dispersion=1937.996, jitter=0.356,
reftime=d2e4ad11.612a2f53 Tue, Feb 14 2012 15:21:13.379,
org=d2e4ad1d.5fd4fdf0 Tue, Feb 14 2012 15:21:25.374,
rec=d2e4ad1d.600e34aa Tue, Feb 14 2012 15:21:25.375,
xmt=d2e4ad1d.5fc24ffd Tue, Feb 14 2012 15:21:25.374,
filtdelay= 1.12 0.47 0.47 0.00 0.00 0.00 0.00 0.00,
filtoffset= -0.31 0.03 0.05 0.00 0.00 0.00 0.00 0.00,
filtdisp= 0.02 0.98 1.95 16000.0 16000.0 16000.0 16000.0 16000.0
ntpdc> dmpeers
remote local st poll reach delay offset disp
===================================================================================
*192.168.29.211 192.168.29.200 11 64 377 0.00047 0.003895 0.04347
ntpdc> loopinfo
offset: 0.003637 s
frequency: 3.334 ppm
poll adjust: 18
watchdog timer: 27 s
ntpdc> monlist
remote address port local address count m ver code avgint lstint
===============================================================================
localhost 32782 127.0.0.1 5 7 2 2 54 0
192.168.29.211 123 192.168.29.200 10 4 4 1c0 64 46
ntpdc> pstats 192.168.29.211
remote host: 192.168.29.211
local interface: 192.168.29.200
time last received: 19s
time until next send: 47s
reachability change: 661s
packets sent: 11
packets received: 11
bad authentication: 0
bogus origin: 0
duplicate: 0
bad dispersion: 0
bad reference time: 0
candidate order: 6
flags: system_peer, config, bclient, prefer
ntptime
ntp_gettime() returns code 0 (OK)
time d2e4afb8.f3def000 Tue, Feb 14 2012 15:32:32.952, (.952621),
maximum error 65225 us, estimated error 1218 us
ntp_adjtime() returns code 0 (OK)
modes 0x0 (),
offset 2877.000 us, frequency 3.359 ppm, interval 1 s,
maximum error 65225 us, estimated error 1218 us,
status 0x1 (PLL),
time constant 6, precision 1.000 us, tolerance 512 ppm,
ntpstat
synchronised to NTP server (192.168.29.211) at stratum 12
time correct to within 18 ms
polling server every 64 s
Any suggestions?
Thanks
Mantis
|