The NanoPi M1 is an Allwinner H3 based ARM board designed and released by FriendlyARM for hobbyists, makers and electronic fans. It is only two thirds the size of the Raspberry Pi. It is open source. It works with Ubuntu MATE, Debian and etc.
The NanoPi M1 uses the Allwinner H3 Soc. It integrates Ethernet, IR receiver, video/audio output and supports HDMI and AVOUT. It can be powered via the MicroUSB port
In such a small board it still integrates rich interfaces and ports. Besides the popular HDMI, Ethernet, USB-Host, USB-OTG, DVP camera interface and AVOUT (audio and video) it has an onboard Microphone, IR receiver, a serial debug port and a Raspberry Pi compatible 40 pin GPIO pin header.
Features
CPU: Allwinner H3, Quad-core Cortex-A7@1.2GHz
GPU: Mali400MP2@600MHz，Supports OpenGL ES2.0
DDR3 RAM: 512MB/1GB
Connectivity: 10/100M Ethernet
Audio: 3.5mm audio jack/Via HDMI
Microphone: Onboard microphone
IR Receiver: Onboard IR receiver
USB Host：Type A, USB 2.0 x 3
MicroSD Slot x 1
MicroUSB: for data transmission and power input, OTG
Video Output: HDMI 1.4 1080P, CVBS
DVP Camera Interface: 24pin, 0.5mm pitch FPC seat
Debug Serial Port: 4Pin, 2.54mm pitch pin header
GPIO: 2.54mm spacing 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, IO etc
User Key: Power LED x 1, Reset x 1
PC Size: 64 x 50mm
Power Supply: DC 5V/2A
OS/Software: u-boot，Ubuntu MATE，Debian
More OS Support
NanoPi M1 supports much more OS , FriendlyARM provides UbuntuCore with Qt、Debian and Android for NanoPi M1, and will update these OS Constantly，another way friendlyarm provides UbuntuMATE for enthusiasts . NanoPi M1 also supports much more OS that variant developed by enthusiasts such as Debian8(Jacer)、Android（Jacer）、OpenWRT、Armbian，et.
3D printed housing
NanoPi M1 3D housing printing files:[
http://wiki.friendlyarm.com/wiki/ind...6%E5%A3%B3.7z]
A Good Kit for Starters
Matrix - Compact Kit B:[
http://wiki.friendlyarm.com/wiki/ind..._Compact_Kit_B click to visit]
==Resources==
* Schematic
** [
http://wiki.friendlyarm.com/wiki/ima...-Schematic.pdf NanoPi-M1-1603-Schematic.pdf]
** [
http://wiki.friendlyarm.com/wiki/ima...-Schematic.pdf NanoPi-M1-1603B-Schematic.pdf]
* Dimensional Diagram
** [
http://wiki.friendlyarm.com/wiki/ima...s%28dxf%29.zip NanoPi-M1-1603-dimensions(dxf).zip]
** [
http://wiki.friendlyarm.com/wiki/ima...s%28dxf%29.zip NanoPi-M1-1603B-dimensions(dxf).zip]
* Allwinner H3 datasheet [
http://wiki.friendlyarm.com/wiki/ima...sheet_V1.2.pdf Allwinner_H3_Datasheet_V1.2.pdf]
* Matrix Modules & Wiki Sites:
** [
http://wiki.friendlyarm.com/wiki/ind...atrix_-_Button Button]
** [
http://wiki.friendlyarm.com/wiki/index.php/Matrix_-_LED LED]
** [
http://wiki.friendlyarm.com/wiki/ind...ital_Converter A/D Converter]
** [
http://wiki.friendlyarm.com/wiki/ind...Matrix_-_Relay Relay]
** [
http://wiki.friendlyarm.com/wiki/ind..._Accelerometer 3-Axis Digital Accelerometer]
** [
http://wiki.friendlyarm.com/wiki/ind...igital_Compass 3-Axis Digital Compass]
** [
http://wiki.friendlyarm.com/wiki/ind...erature_Sensor Temperature Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...umidity_Sensor Temperature & Humidity Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...atrix_-_Buzzer Buzzer]
** [
http://wiki.friendlyarm.com/wiki/ind...rix_-_Joystick Joystick]
** [
http://wiki.friendlyarm.com/wiki/ind...LCD1602_Keypad I2C(PCF8574)+LCD1602]
** [
http://wiki.friendlyarm.com/wiki/ind...-_Sound_Sensor Sound Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...rasonic_Ranger Ultrasonic Ranger]
** [
http://wiki.friendlyarm.com/wiki/index.php/Matrix_-_GPS GPS]
** [
http://wiki.friendlyarm.com/wiki/ind..._-_Compact_Kit Matrix - Compact Kit]
** [
http://wiki.friendlyarm.com/wiki/ind..._-_Fire_Sensor Fire Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...trix_-_CAM500A CAM500A Camera]
** [
http://wiki.friendlyarm.com/wiki/ind...Rolling_Switch BAll Rolling Switch]
** [
http://wiki.friendlyarm.com/wiki/ind...78_SPI_Key_TFT 2'8 SPI Key TFT 2.8" SPI LCD]
** [
http://wiki.friendlyarm.com/wiki/ind...x_-_IR_Counter IR Counter]
** [
http://wiki.friendlyarm.com/wiki/ind..._-_IR_Receiver IR Receiver]
** [
http://wiki.friendlyarm.com/wiki/ind...N_Motor_Driver L298N Motor Driver]
** [
http://wiki.friendlyarm.com/wiki/ind...Q-2_Gas_Sensor MQ-2 Gas Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...Q-3_Gas_Sensor MQ-3 Gas Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...e_Touch_Sensor One_Touch_Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind..._Photoresistor _Photoresistor]
** [
http://wiki.friendlyarm.com/wiki/ind..._Potentiometer _Potentiometer]
** [
http://wiki.friendlyarm.com/wiki/ind...erature_Sensor Pressure & Temperature Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...trix_-_RGB_LED RGB LED]
** [
http://wiki.friendlyarm.com/wiki/index.php/Matrix_-_RTC RTC]
** [
http://wiki.friendlyarm.com/wiki/ind...Rotary_Encoder Rotary Encoder]
** [
http://wiki.friendlyarm.com/wiki/ind...oisture_Sensor Soil Moisture Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...x_-_Thermistor Thermistor]
** [
http://wiki.friendlyarm.com/wiki/ind...rix_-_USB_WiFi USB WiFi]
** [
http://wiki.friendlyarm.com/wiki/ind...-_Water_Sensor Water Sensor]
More about NanoPi M1，that you can read ：
http://www.friendlyarm.com/index.php...product_id=109
NanoPi M1 Allwinner H3 Development Board with HDMI, CVBS, Ethernet and 3 USB Ports
