LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware > Linux - Embedded & Single-board computer
Reload this Page Errors including shared prebuilt libraries in petalinux (yocto)
User Name
Password
Linux - Embedded & Single-board computer This forum is for the discussion of Linux on both embedded devices and single-board computers (such as the Raspberry Pi, BeagleBoard and PandaBoard). Discussions involving Arduino, plug computers and other micro-controller like devices are also welcome.

Notices


Reply
  Search this Thread
Old 04-11-2020, 03:31 PM   #1
pplu
LQ Newbie
 
Registered: Apr 2020
Posts: 2

Rep: Reputation: Disabled
Errors including shared prebuilt libraries in petalinux (yocto)

Hello,

I'm new in the forum and also relatively new with Linux.

I'm working on an embedded system running petalinux (yocto based) and I'm using ubuntu to compile and configure the linux image to boot on the hardware device.

I'm trying to simply include a couple of shared libraries into my petalinux project. Following the "Including Prebuilt Libraries" section on pg 65 of the petalinux guide I've got the next recipes to included both libraries (only I post one because the other is the same but only changing the name):

Code:
#
# This file is the libpiimager recipe.
#

SUMMARY = "Simple libpiimager application"
SECTION = "PETALINUX/apps"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"

SRC_URI = "file://libirimager.so \
    "

S = "${WORKDIR}"

TARGET_CC_ARCH += "${LDFLAGS}"
INSANE_SKIP_${PN} = "arch" 

do_install() {
         install -d ${D}/${libdir}
         install -m 0755 ${S}/libirimager.so ${D}/${libdir}
}

FILES_${PN} += "${libdir}"
FILES_SOLIBSDEV = ""
The problem is that building the image I've got the next errors:

Code:
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libstdc++.so.6(CXXABI_ARM_1.3.3), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires ld-linux.so.3, but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libstdc++.so.6, but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libgcc_s.so.1, but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libstdc++.so.6(GLIBCXX_3.4.11), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libstdc++.so.6(GLIBCXX_3.4), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libgcc_s.so.1(GCC_3.5), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires ld-linux.so.3(GLIBC_2.4), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libstdc++.so.6(CXXABI_1.3), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libm.so.6(GLIBC_2.4), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libc.so.6(GLIBC_2.4), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libstdc++.so.6(GLIBCXX_3.4.15), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libstdc++.so.6(GLIBCXX_3.4.9), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libc.so.6, but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libm.so.6, but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimager.so contained in package libpiimager requires libc.so.6(GLIBC_2.15), but no providers found in RDEPENDS_libpiimager? [file-rdeps]
ERROR: libpiimager-1.0-r0 do_package_qa: QA Issue: Architecture did not match (ARM, expected AArch64) on /work/aarch64-xilinx-linux/libpiimager/1.0-r0/packages-split/libpiimager-dbg/usr/lib/.debug/libirimager.so [arch]
ERROR: libpiimager-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: libpiimager-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/aarch64-xilinx-linux/libpiimager/1.0-r0/temp/log.do_package_qa.26170
ERROR: Task (/home/josee/hdl/dev/petalinux/sw_vlu/project-spec/meta-user/recipes-apps/libpiimager/libpiimager.bb:do_package_qa) failed with exit code '1'
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: Architecture did not match (ARM, expected AArch64) on /work/aarch64-xilinx-linux/libirimageprocessing/1.0-r0/packages-split/libirimageprocessing-dbg/usr/lib/.debug/libirimageprocessing.so [arch]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libstdc++.so.6(CXXABI_ARM_1.3.3), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires ld-linux.so.3, but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libstdc++.so.6, but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libgcc_s.so.1, but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libstdc++.so.6(GLIBCXX_3.4.11), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libstdc++.so.6(GLIBCXX_3.4), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libstdc++.so.6(CXXABI_1.3), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires ld-linux.so.3(GLIBC_2.4), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libm.so.6(GLIBC_2.4), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libc.so.6(GLIBC_2.4), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libgcc_s.so.1(GCC_3.5), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libc.so.6(GLIBC_2.7), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libstdc++.so.6(GLIBCXX_3.4.9), but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libc.so.6, but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA Issue: /usr/lib/libirimageprocessing.so contained in package libirimageprocessing requires libm.so.6, but no providers found in RDEPENDS_libirimageprocessing? [file-rdeps]
ERROR: libirimageprocessing-1.0-r0 do_package_qa: QA run found fatal errors. Please consider fixing them.
ERROR: libirimageprocessing-1.0-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: /home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/aarch64-xilinx-linux/libirimageprocessing/1.0-r0/temp/log.do_package_qa.26173
ERROR: Task (/home/josee/hdl/dev/petalinux/sw_vlu/project-spec/meta-user/recipes-apps/libirimageprocessing/libirimageprocessing.bb:do_package_qa) failed with exit code '1'
ERROR: petalinux-user-image-1.0-r0 do_rootfs: Could not invoke dnf. Command '/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/recipe-sysroot-native/usr/bin/dnf -y -c /home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs/etc/dnf/dnf.conf --setopt=reposdir=/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs/etc/yum.repos.d --repofrompath=oe-repo,/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/oe-rootfs-repo --installroot=/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs --setopt=logdir=/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/temp --nogpgcheck install shadow libpiimager libc6 webfwu pciutils libstdc++-dev i2c-tools mtd-utils packagegroup-core-boot watchdog-init busybox-httpd udev-extraconf packagegroup-petalinux-utils libc6-dev openssh-sftp-server canutils bootscript kernel-modules libstdc++6 packagegroup-petalinux-gstreamer run-postinsts base-passwd libomxil-xlnx libusb-1.0-0 libirimageprocessing libm3api2 bridge-utils tcf-agent packagegroup-petalinux-v4lutils hellopm packagegroup-core-ssh-dropbear startup' returned 1:
Added oe-repo repo from /home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/oe-rootfs-repo
Last metadata expiration check: 0:00:01 ago on Fri 10 Apr 2020 03:35:51 PM UTC.
Error: 
 Problem 1: conflicting requests
  - nothing provides libc.so.6(GLIBC_2.15) needed by libpiimager-1.0-r0.aarch64
 Problem 2: conflicting requests
  - nothing provides libc.so.6(GLIBC_2.7) needed by libirimageprocessing-1.0-r0.aarch64

ERROR: petalinux-user-image-1.0-r0 do_rootfs: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/temp/log.do_rootfs.26188
ERROR: Task (/home/josee/hdl/dev/petalinux/sw_vlu/project-spec/meta-plnx-generated/recipes-core/images/petalinux-user-image.bb:do_rootfs) failed with exit code '1'
I looked for the missing dependencies and they are all installed (last libraries versions), eg:

Code:
#sudo apt-get install libstdc++6
Reading package lists... Done
Building dependency tree       
Reading state information... Done
libstdc++6 is already the newest version (5.4.0-6ubuntu1~16.04.11).
0 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade.


#sudo apt-get install libc6
Reading package lists... Done
Building dependency tree       
Reading state information... Done
libc6 is already the newest version (2.23-0ubuntu11).
0 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade.
Also I tried to include them in the recipe, e.g with:

Code:
RDEPENDS_${PN} += "libc6"
RDEPENDS_${PN} += "libstdc++6"
(...)
But still can't find the libraries and errors persists.

Does anyone have an idea why I'm getting those errors if I already have the latest library versions installed?

Any clues/help would be much appreciated.
 
Old 04-13-2020, 04:54 AM   #2
shruggy
Senior Member
 
Registered: Mar 2020
Posts: 3,663

Rep: Reputation: Disabled
The recipe above only installs already prebuilt library into rootfs image. Are you sure it was built specifically for the petalinux environment, and not for the hosting Ubuntu environment? (If you ask me how to build specifically for petalinux, my answer will be: no idea, look it up in the petalinux guide). I guess the recipe on page 69 could give some clues.
 
Old 04-13-2020, 05:21 AM   #3
pplu
LQ Newbie
 
Registered: Apr 2020
Posts: 2

Original Poster
Rep: Reputation: Disabled
Hi shruggy,

Thanks for your answer.

Sorry I didn't explain clearly, Yes, what I'm trying to do is to include third party prebuilt libraries to the petalinux image (I did this successfully before with other different libraries). That libraries I'm trying to include are built for aarch64.

I've made a little of progress (I guess) including: INSANE_SKIP_${PN} += "file-rdeps" line in the recipe:

Code:
#
# This file is the libpiimager recipe.
#

SUMMARY = "Simple libpiimager application"
SECTION = "PETALINUX/apps"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"

SRC_URI = "file://libirimager.so \
    "

S = "${WORKDIR}"

TARGET_CC_ARCH += "${LDFLAGS}"
INSANE_SKIP_${PN} += "arch" 
INSANE_SKIP_${PN} += "file-rdeps"

do_install() {
         install -d ${D}/${libdir}
         install -m 0755 ${S}/libirimager.so ${D}/${libdir}
}

FILES_${PN} += "${libdir}"
FILES_SOLIBSDEV = ""
But now I'm having this errors:

Code:
ERROR: petalinux-user-image-1.0-r0 do_rootfs: Could not invoke dnf. Command '/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/recipe-sysroot-native/usr/bin/dnf -y -c /home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs/etc/dnf/dnf.conf --setopt=reposdir=/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs/etc/yum.repos.d --repofrompath=oe-repo,/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/oe-rootfs-repo --installroot=/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/rootfs --setopt=logdir=/home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/temp --nogpgcheck install libstdc++6 packagegroup-core-ssh-dropbear base-passwd libomxil-xlnx packagegroup-petalinux-utils canutils packagegroup-petalinux-gstreamer hellopm libpiimager run-postinsts openssh-sftp-server libm3api2 libusb-1.0-0 bridge-utils packagegroup-petalinux-v4lutils libirimageprocessing tcf-agent webfwu pciutils libc6 libc6-dev shadow mtd-utils bootscript kernel-modules i2c-tools libstdc++-dev watchdog-init packagegroup-core-boot busybox-httpd udev-extraconf startup' returned 1:
Added oe-repo repo from /home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/oe-rootfs-repo
Last metadata expiration check: 0:00:01 ago on Sun 12 Apr 2020 04:40:52 PM UTC.
Error: 
 Problem 1: conflicting requests
  - nothing provides libc.so.6(GLIBC_2.15) needed by libpiimager-1.0-r0.aarch64
 Problem 2: conflicting requests
  - nothing provides libc.so.6(GLIBC_2.7) needed by libirimageprocessing-1.0-r0.aarch64

ERROR: petalinux-user-image-1.0-r0 do_rootfs: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/josee/hdl/dev/petalinux/sw_vlu/build/tmp/work/plnx_zynqmp-xilinx-linux/petalinux-user-image/1.0-r0/temp/log.do_rootfs.9499
ERROR: Task (/home/josee/hdl/dev/petalinux/sw_vlu/project-spec/meta-plnx-generated/recipes-core/images/petalinux-user-image.bb:do_rootfs) failed with exit code '1'
The thing I don't understand at all is how is possible it doesn't find libc.so.6 2.15 and 2.7 if I've got installed the newest version.

Any ideas?

Thanks in advance.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
LXer: Open Source Summit & ELC + OpenIoT Summit Europe Features 13 Co-Located Events including Linux Security Summit, Yocto Dev Day, LF Ener LXer Syndicated Linux News 0 09-29-2018 01:51 AM
upgarding linux kernel in embeded linux(petalinux) elsiete.moon Linux - Kernel 2 08-20-2013 03:44 PM
PCI Express Bus Driver for PetaLinux - Xilinx ML605 FPGA bfr03 Linux - Embedded & Single-board computer 0 09-18-2012 03:12 AM
mount SD on Xilinx board in petalinux zali Programming 5 03-16-2012 09:31 AM
Cross compiling to Windows binary, including Linux shared libraries Siiiiiii Programming 2 03-09-2007 12:36 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware > Linux - Embedded & Single-board computer

All times are GMT -5. The time now is 11:00 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration