| sam_android |
08-17-2012 01:04 AM |
bboting panda board es
Code:
3988900 bytes read
## Booting kernel from Legacy Image at 80000000 ...
Image Name: Linux-3.0.8-g781c6c6-dirty
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3988836 Bytes = 3.8 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.8-g781c6c6-dirty (root@pcb-ee206576) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 SMP PREEMPT Fri Aug 17 02:28:08 IST 2012
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] Truncating RAM at 80000000-bfffffff to -afffffff (vmalloc region overlap).
[ 0.000000] Reserving 33554432 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000
[ 0.000000] On node 0 totalpages: 169984
[ 0.000000] free_area_init_node: node 0, pgdat c07bc080, node_mem_map c0930000
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 168448 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0f3a000 s6912 r8192 d13568 u32768
[ 0.000000] pcpu-alloc: s6912 r8192 d13568 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 168448
[ 0.000000] Kernel command line: console=ttyO2,115200n8 mem=1G androidboot.console=ttyO2 vram="32M" omapfb.vram=0:16M omapfb.mode=dvi:1024x600MR-16@60 consoleblank0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 512MB 152MB = 664MB total
[ 0.000000] Memory: 663496k/663496k available, 122936k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0046000 ( 248 kB)
[ 0.000000] .text : 0xc0046000 - 0xc075c000 (7256 kB)
[ 0.000000] .data : 0xc075c000 - 0xc07bc860 ( 387 kB)
[ 0.000000] .bss : 0xc07bc884 - 0xc092f958 (1485 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000030] Calibrating delay loop... 1830.74 BogoMIPS (lpj=7151616)
[ 0.070373] pid_max: default: 32768 minimum: 301
[ 0.070373] Mount-cache hash table entries: 512
[ 0.070373] Initializing cgroup subsys debug
[ 0.071166] Initializing cgroup subsys cpuacct
[ 0.071166] Initializing cgroup subsys freezer
[ 0.071166] CPU: Testing write buffer coherency: ok
[ 0.071624] L310 cache controller enabled
[ 0.071655] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
[ 0.149780] CPU1: Booted secondary processor
[ 0.220123] Brought up 2 CPUs
[ 0.220123] SMP: Total of 2 processors activated (3670.89 BogoMIPS).
[ 0.220306] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[ 0.222717] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
[ 0.222717] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
[ 0.222717] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
[ 0.222747] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[ 0.222747] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[ 0.222747] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[ 0.222778] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[ 0.222778] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
[ 0.222778] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
[ 0.222869] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
[ 0.222869] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
[ 0.222869] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
[ 0.222869] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.223571] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
[ 0.227844] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.233154] print_constraints: dummy:
[ 0.233154] NET: Registered protocol family 16
[ 0.233489] GPMC revision 6.0
[ 0.233489] EMIF0 is enabled with IRQ142
[ 0.234497] EMIF1 is enabled with IRQ143
[ 0.234497] Last reset was cold reset (PRM_RSTST=0x1)
[ 0.234527]
[ 0.234893] OMAP GPIO hardware version 0.1
[ 0.235870] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.237274] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.237274] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
[ 0.238189] omap_hwmod_mux_init: Could not allocate device mux entry
[ 0.248107] OMAP DMA hardware revision 0.0
[ 0.248107] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
[ 0.254211] bio: create slab <bio-0> at 0
[ 0.254516] print_constraints: vwl1271: 1800 mV
[ 0.254516] i2c-core: driver [twl] using legacy suspend method
[ 0.255096] i2c-core: driver [twl] using legacy resume method
[ 0.255096] SCSI subsystem initialized
[ 0.255096] usbcore: registered new interface driver usbfs
[ 0.255096] usbcore: registered new interface driver hub
[ 0.255706] usbcore: registered new device driver usb
[ 0.256286] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[ 0.256835] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 0.257385] twl6030: PIH (irq 39) chaining IRQs 368..387
[ 0.258880] print_constraints: VUSB: 3300 mV normal standby
[ 0.461273] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.461822] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[ 0.462188] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[ 0.462188] print_constraints: VCXIO: 1800 mV normal standby
[ 0.462860] print_constraints: VDAC: 1800 mV normal standby
[ 0.463287] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[ 0.463623] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[ 0.464447] print_constraints: CLK32KG:
[ 0.464477] print_constraints: VANA: 2100 mV normal standby
[ 0.464874] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
[ 0.465087] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
[ 0.465332] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[ 0.465454] omap-rproc omap-rproc.0: dsp is available
[ 0.465454] omap-rproc omap-rproc.1: ipu is available
[ 0.465454] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.466003] Bluetooth: Core ver 2.16
[ 0.466003] NET: Registered protocol family 31
[ 0.466583] Bluetooth: HCI device and connection manager initialized
[ 0.466583] Bluetooth: HCI socket layer initialized
[ 0.466613] Bluetooth: L2CAP socket layer initialized
[ 0.466613] Bluetooth: SCO socket layer initialized
[ 0.466949] cfg80211: Calling CRDA to update world regulatory domain
[ 0.467071] Switching to clocksource 32k_counter
[ 0.469238] musb-hdrc: version 6.0, musb-dma, peripheral
[ 0.469451] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.469451] musb-hdrc: MHDRC RTL version 2.0
[ 0.469482] musb-hdrc: setup fifo_mode 4
[ 0.469482] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.469482] musb-hdrc musb-hdrc: USB Peripheral mode controller at fc0ab000 using DMA, IRQ 124
[ 0.469818] NET: Registered protocol family 2
[ 0.470092] Switched to NOHz mode on CPU #0
[ 0.470123] Switched to NOHz mode on CPU #1
[ 0.470245] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.470245] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.470245] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
[ 0.470245] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.470245] TCP reno registered
[ 0.475280] UDP hash table entries: 512 (order: 3, 32768 bytes)
[ 0.475372] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
[ 0.475616] NET: Registered protocol family 1
[ 1.233459] omap_init_opp_table: no hwmod or odev for hsi, [22] cannot add OPPs.
[ 1.233459] omap_init_opp_table: no hwmod or odev for hsi, [23] cannot add OPPs.
[ 1.381866] ram_console: got buffer at a0000000, size 200000
[ 1.382751] ram_console: uncorrectable error in header
[ 1.382751] ram_console: no valid data in buffer (sig = 0xc28faa0e)
[ 1.394073] console [ram-1] enabled
[ 1.394073] omap-iommu omap-iommu.0: ducati registered
[ 1.394744] omap-iommu omap-iommu.1: tesla registered
[ 1.401123] ashmem: initialized
[ 1.405792] fuse init (API version 7.16)
[ 1.405792] msgmni has been set to 1295
[ 1.409393] io scheduler noop registered
[ 1.409454] io scheduler deadline registered
[ 1.409454] io scheduler cfq registered (default)
[ 1.409729] start plist test
[ 1.409729] end plist test
[ 1.419525] OMAP DSS rev 4.0
[ 1.426818] dsscomp: initializing.
[ 1.427429] misc dsscomp: display0=hdmi_panel
[ 1.427581] misc dsscomp: display1=generic_dpi_panel
[ 1.427581] misc dsscomp: found 2 displays and 4 overlays
[ 1.428009] could not allocate slot
[ 1.428314] omap-rproc omap-rproc.1: powering up ipu
[ 1.428527] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
[ 1.428802] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
[ 1.429748] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 1.459991] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 1.499053] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 2.516571] console [ttyO2] enabled
[ 2.624206] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 2.779907] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000
[ 2.788726] omap_ion_probe: adding heap tiler of type 4 with ada00000@6000000
[ 2.796691] omap_ion_probe: adding heap nonsecure_tiler of type 4 with a0200000@2000000
[ 2.805572] PVR: PVRCore_Init
[ 2.809295] PVR: PVRSRVDriverProbe(pDevice=eb4ad800)
[ 2.814910] PVR: SGX register base: 0x56000000
[ 2.819885] PVR: SGX register size: 65535
[ 2.824432] PVR: SGX IRQ: 53
[ 2.824432] PVR: EnableSystemClocks: Enabling System Clocks
[ 2.833892] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency (EBUSY) [167, drivers/gpu/pvr/omap4/sysutils_linux.c]
[ 2.846862] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency (EBUSY) [167, drivers/gpu/pvr/omap4/sysutils_linux.c]
[ 2.860046] PVR: PVRCore_Init: major device 251
[ 2.870727] brd: module loaded
[ 2.874145] loop: module loaded
[ 2.882537] PPP generic driver version 2.4.2
[ 2.882537] PPP Deflate Compression module registered
[ 2.882537] PPP BSD Compression module registered
[ 2.900115] PPP MPPE Compression module registered
[ 2.905487] NET: Registered protocol family 24
[ 2.905487] usbcore: registered new interface driver asix
[ 2.918090] usbcore: registered new interface driver cdc_ether
[ 2.924621] usbcore: registered new interface driver smsc95xx
[ 2.928894] usbcore: registered new interface driver net1080
[ 2.936553] usbcore: registered new interface driver cdc_subset
[ 2.944122] usbcore: registered new interface driver zaurus
[ 2.950317] cdc_ncm: 04-Aug-2011
[ 2.954071] usbcore: registered new interface driver cdc_ncm
[ 2.959991] usbcore: registered new interface driver zd1201
[ 2.960449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.974121] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.974121] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.988677] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 3.001586] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 3.007995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.007995] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.023651] usb usb1: Product: OMAP-EHCI Host Controller
[ 3.023651] usb usb1: Manufacturer: Linux 3.0.8-g781c6c6-dirty ehci_hcd
[ 3.023651] usb usb1: SerialNumber: ehci-omap.0
[ 3.042327] hub 1-0:1.0: USB hub found
[ 3.046569] hub 1-0:1.0: 3 ports detected
[ 3.077209] usbcore: registered new interface driver cdc_acm
[ 3.077209] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.092498] Initializing USB Mass Storage driver...
[ 3.092498] usbcore: registered new interface driver usb-storage
[ 3.104705] USB Mass Storage support registered.
[ 3.109832] usbcore: registered new interface driver usbserial
[ 3.116516] usbserial: USB Serial Driver core
[ 3.116516] USB Serial support registered for Keyspan - (without firmware)
[ 3.129058] USB Serial support registered for Keyspan 1 port adapter
[ 3.129058] USB Serial support registered for Keyspan 2 port adapter
[ 3.143188] USB Serial support registered for Keyspan 4 port adapter
[ 3.150451] usbcore: registered new interface driver keyspan
[ 3.156738] keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
[ 3.365386] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 3.372985] android_usb gadget: Number of LUNs=1
[ 3.377197] usb 1-1: new high speed USB device number 2 using ehci-omap
[ 3.385345] lun0: LUN: removable file: (no medium)
[ 3.390808] android_usb gadget: android_usb ready
[ 3.396179] mousedev: PS/2 mouse device common for all mice
[ 3.403381] twl_rtc twl_rtc: Power up reset detected.
[ 3.409912] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 3.416259] using rtc device, twl_rtc, for alarms
[ 3.416259] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 3.428680] i2c /dev entries driver
[ 3.433166] lirc_dev: IR Remote Control driver registered, major 248
[ 3.433166] IR NEC protocol handler initialized
[ 3.445251] IR RC5(x) protocol handler initialized
[ 3.445251] IR RC6 protocol handler initialized
[ 3.455627] IR JVC protocol handler initialized
[ 3.455627] IR Sony protocol handler initialized
[ 3.465759] IR RC5 (streamzap) protocol handler initialized
[ 3.471984] IR LIRC bridge handler initialized
[ 3.476928] dmm: probe base: fd300000, irq 145
[ 3.484252] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.492401] device-mapper: uevent: version 1.0.3
[ 3.497833] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 3.507202] Bluetooth: HCI UART driver ver 2.2
[ 3.512115] Bluetooth: HCI H4 protocol initialized
[ 3.517395] cpuidle: using governor ladder
[ 3.521881] cpuidle: using governor menu
[ 3.531433] usbcore: registered new interface driver usbhid
[ 3.537506] usbhid: USB HID core driver
[ 3.542083] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.542205] logger: created 256K log 'log_main'
[ 3.542297] logger: created 256K log 'log_events'
[ 3.542388] logger: created 256K log 'log_radio'
[ 3.542480] logger: created 256K log 'log_system'
[ 3.542602] thermal_governor_dev_register:Adding omap_ondie_governor governor
[ 3.542877] thermal_sensor_dev_register:Found cpu cpu
[ 3.542877] thermal_sensor_dev_register:Adding omap_ondie_sensor sensor
[ 3.544921] thermal_sensor_set_temp:No cooling agents for domain cpu
[ 3.544921] omap_report_temp:thermal_sensor_set_temp reports error
[ 3.554199] thermal_sensor_set_temp:No cooling agents for domain cpu
[ 3.554260] thermal_sensor_set_temp:No cooling agents for domain cpu
[ 3.554260] omap_report_temp:thermal_sensor_set_temp reports error
[ 3.554290] omap_temp_sensor omap_temp_sensor.0: omap_ondie_sensor : 'omap_temp_sensor'
[ 3.556610] SDP4430 SoC init
[ 3.561279] twl6040-codec twl6040-codec: couldn't get VDDHF regulator -19
[ 3.644683] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.653106] hub 1-1:1.0: USB hub found
[ 3.658294] hub 1-1:1.0: 5 ports detected
[ 3.687469] asoc: null-codec-dai <-> MultiMedia1 mapping ok
[ 3.694519] asoc: null-codec-dai <-> MultiMedia2 mapping ok
[ 3.701782] asoc: null-codec-dai <-> Voice mapping ok
[ 3.708221] asoc: null-codec-dai <-> Tones mapping ok
[ 3.714630] asoc: null-codec-dai <-> Vibra mapping ok
[ 3.720794] asoc: null-codec-dai <-> MODEM mapping ok
[ 3.726959] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
[ 3.734558] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 3.741790] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok
[ 3.748779] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok
[ 3.756378] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file
[ 3.766967] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[ 3.773315] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[ 3.779602] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[ 3.785980] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[ 3.792419] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 3.799377] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok
[ 3.806335] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok
[ 3.813385] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok
[ 3.819915] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok
[ 3.827087] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok
[ 3.834228] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok
[ 3.840759] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.851470] input: Panda Headset Jack as /devices/platform/soc-audio/sound/card0/input0
[ 3.862091] ALSA device list:
[ 3.865447] #0: TI OMAP4 Board
[ 3.869232] GACT probability NOT on
[ 3.873107] Mirror/redirect action on
[ 3.877288] mmc0: new SDHC card at address e624
[ 3.882598] u32 classifier
[ 3.885620] mmcblk0: mmc0:e624 SD04G 3.69 GiB
[ 3.890594] Actions configured
[ 3.894317] Netfilter messages via NETLINK v0.30.
[ 3.900024] nf_conntrack version 0.5.0 (10367 buckets, 41468 max)
[ 3.907623] ctnetlink v0.93: registering with nfnetlink.
[ 3.913482] mmcblk0: p1 p2
[ 3.921203] xt_time: kernel timezone is -0000
[ 3.927734] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.952301] arp_tables: (C) 2002 David S. Miller
[ 3.957458] TCP cubic registered
[ 3.961212] usb 1-1.1: new high speed USB device number 3 using ehci-omap
[ 3.976226] NET: Registered protocol family 10
[ 3.993438] Mobile IPv6
[ 3.996124] IPv6 over IPv4 tunneling driver
[ 4.011352] NET: Registered protocol family 17
[ 4.030334] NET: Registered protocol family 15
[ 4.045959] Bluetooth: RFCOMM TTY layer initialized
[ 4.051361] Bluetooth: RFCOMM socket layer initialized
[ 4.057006] Bluetooth: RFCOMM ver 1.11
[ 4.061218] NET: Registered protocol family 35
[ 4.068847] lib80211: common routines for IEEE802.11 drivers
[ 4.075042] lib80211_crypt: registered algorithm 'NULL'
[ 4.080841] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 4.089599] ThumbEE CPU extension supported.
[ 4.094329] Registering SWP/SWPB emulation handler
it is stuck here
please throw some idea |
