Hi

I have a problem installing my version of Suse Linux 9.1, it installs the first cd and identify all hardware but when it reboots to continue to cd 2 it get's this message:
Uniform Multi-Platform E-IDE Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for Pio modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ICH5: chipset revidion 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, Bios settins: hdaMA hdbio
ide1: BM-DMA at 0xf008-0xf00f, Bios settins: hdcio hddio
hda: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7, 0x3f6 on irq 14
hdc: HL-DT-ST GCG-8520B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177, 0x376 on irq 15

Unable to handle kernel NULL pointer deference at virtual address 00000100

printing eip:
c03fe7ca
*pde = 00000000
Oops: 0000[#1]
SMP
CPU = 0
GIP: 0060: [<c03fe7ca>] Not tainted
EFLAGS: 00010292 (2.6.4-52-smp)
EIP is at init_setup_bpt366+0xaa/0x1b0
eax: 00000006 ebx: 00000000 ecx: 01040006 edx: c03989e0
esi: 00000100 edi: c035614d ebp: c1983c00 esp: f7fadf68
ds: 007b es: 007b ss: 0068

Process swapper cpid:1, threadinfo=f7fac000 task:c187d7fo)
Stack: f7fadf80 c04863e0 00000000 c0197a49 c03989e0 00006680 00000006 c035614d
c035614d c0356198 c035619f c035618a 00000010 f7eed400 c1983c00
c1983c00 00000000 00000000 c02647cf c0398880 c040191b c1983c00 00000000

Call Trace:
[<c0197a49>] Create_proc_entry+0x69/0xb0
[<c02647cf>] hpt366_init_one+0x2f/0x40
[<c040292b>] ide_scan_pcidev+0x4b/0x70
[<c0402968>] ide_scan_pcibus+0x18/0xa0
[<c040216a>] ide_init+0x7a/0xf0
[<c01031c3>] init+0x153/0x2e2
[<c0103070>] init+0x0/0x2e2
[<c0107005>] kernel_thread_helper+0x5/0x10

Code: ac aa 84 c0 75 fa 8b 44 24 18 83 e8 03 83 f8 02 0f 86 98 00
<0>Kernel panic: Attempted to Kill init!

My computer is:
MotherBoard DFI LanParty Pro 875
P4 3.0 FSB 800 HT
1024 RAM DDR Dual Channel
HD SATA Seagate Barracuda 4 160GB
Sound Blaster Live 5.1
GeForce 4 TI 4200

All this Hardware is compatible with Suse Linux 9.1... Can you help me with my problem??

Thanks

As a first step you should try to install with ACPI diseable.

It does solve numbefr if issues.

You can always try to reactivate it later after an upgrade.