DRI will not work with radeon driver...
So with the fglrx (ati official) driver i can initiate DRI and get direct rendering, but when i use the radeon (open source) driver it says "AIGLX: Screen 0 is not DRI capable".
Why will it work with one driver and not the other, and i can't just use fglrx, because i want to use AIGLX and beryl to get those nice desktop effects, and it is only supported by radeon, not by fglrx. |
Does it succeed in loading the agpgart and radeon driver modules (i.e. lsmod shows both)?
|
yes, both are have been loaded
|
could really need some help on this...
|
Maybe deinstalling the fglrx package will help getting the radeon driver to work. That did it on my notebook.
|
tried reinstalling both, the thing is that your card is probably older than the 9600 because the radeon driver can not run DRI on anything above radeon 9600
|
I had the same problem with my laptop.
First, try a: $ glxinfo |grep 'direct' to see if the direct rendering is really disabled. You should have an output like this: "direct rendering: No OpenGL renderer string: Mesa GLX Indirect" If the answer is 'No' :tisk:, then the problem is that when you install fglrx, the library /usr/lib/libGL.so.1.2 gets overwritten from the proprietary version from ATI. This library does not work with the radeon driver, so even if you reconfigure X with radeon, direct rendering will not work. You need to ovewrite again the library with the one from Xorg. Of course, the package which contains this library depends on the distribution you are using, if you find this out you can reinstall the package and have the original libGL.so library in place. You can eventually copy the library from some other installation in another PC. Good luck |
Well as said earlier in the thread, i NEED the radeon driver. But as i have mentioned, i discovered that it only works below radeon 9600,so this means no DRI with radeon driver, which means no cool effects... :(
|
Quote:
costavi is right, I had the exact same problem. The solution: I removed xorg-driver-fglrx, libgl1-mesa-dri and libgl1-mesa-glx and reinstalled the libgl1 libraries then I configured xorg according to my guide on asusforum.encke.net/modules/dokuwiki/asus_ati_radeon_ubuntu_aiglx_beryl and everything was running fine. |
All times are GMT -5. The time now is 04:17 PM. |