LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Non-*NIX Forums > General
User Name
Password
General This forum is for non-technical general discussion which can include both Linux and non-Linux topics. Have fun!

Notices


Reply
  Search this Thread
Old 01-29-2005, 01:18 PM   #1
kpachopoulos
Member
 
Registered: Feb 2004
Location: Athens, Greece
Distribution: Gentoo,FreeBSD, Debian
Posts: 705

Rep: Reputation: 30
HELP! pc can't find primary master


What i did was:
-installed xfce for FreeBSD 5.3
-logged out
-tried to login via kdm, but computer crashed
-restarted (hardware reset)

While BIOS is loading it can't find Primary Master and asks me for boot diskette. Inside BIOS i can see only my second primary slave HD. As primary master i can see nothing (i have left it set to "auto").
I am no using a LiveCD, which i think cannot find both HD's. I think "dmesg" has a strange output.
Any ideas? Please help.
------------------------------------------
17 19:33:42 CEST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196604
zone(0): 4096 pages.
zone(1): 192508 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5d60
ACPI: RSDT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x2fffc000
ACPI: FADT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x2fffc0b2
ACPI: BOOT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x2fffc030
ACPI: MADT (v001 ASUS A7S333 0x42302e31 MSFT 0x31313031) @ 0x2fffc058
ACPI: DSDT (v001 ASUS A7S333 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
Using ACPI (MADT) for SMP configuration information
Kernel command line: ramdisk_size=100000 init=/etc/init lang=el apm=power-off vga=791 initrd=minirt24.gz nomce quiet BOOT_IMAGE=knoppix BOOT_IMAGE=linux24
Initializing CPU#0
Detected 1400.064 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2791.83 BogoMIPS
Memory: 773432k/786416k available (1371k kernel code, 12596k reserved, 561k data, 140k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU0: AMD Athlon(TM) XP 1600+ stepping 02
per-CPU timeslice cutoff: 731.32 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1400.1539 MHz.
..... host bus clock speed is 266.6960 MHz.
cpu: 0, clocks: 2666960, slice: 1333480
CPU0<T0:2666960,T1:1333472,D:8,S:1333480,C:2666960>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xf18c0, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (2-23 -> 0xb1 -> IRQ 23 Mode:1 Active:1)
00:00:02[A] -> 2-23 -> IRQ 23
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1)
00:00:02[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1)
00:00:02[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1)
00:00:02[D] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd1 -> IRQ 16 Mode:1 Active:1)
00:00:08[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
00:00:04[A] -> 2-22 -> IRQ 22
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178000
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0000
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 D1
11 001 01 1 1 0 1 0 1 1 B9
12 001 01 1 1 0 1 0 1 1 C1
13 001 01 1 1 0 1 0 1 1 C9
14 001 01 0 1 0 1 0 1 1 A9
15 000 00 1 0 0 0 0 0 0 00
16 001 01 1 1 0 1 0 1 1 D9
17 001 01 1 1 0 1 0 1 1 B1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xf0000000, mapped to 0xf0816000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:5606
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS745 ATA 100 (2nd gen) controller
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hdaio, hdbio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdcMA, hddMA
hdb: probing with STATUS(0x18) instead of ALTSTATUS(0x08)
hdb: S, ATA DISK drive
hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive
hdd: CD-W540E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdb: attached ide-disk driver.
hdb: lost interrupt
hdb: lost interrupt
hdb: recal_intr: status=0x90 { Busy }

hdb: host protected area => 1
hdb: 2083840 sectors (1067 MB) w/2048KiB Cache, CHS=16280/16/8
hdb: lost interrupt
hdb: lost interrupt
Partition check:
hdb:<3>hdb: lost interrupt
hdb: lost interrupt
hdb: read_intr: status=0x98 { Busy }

ide0: reset timed-out, status=0x80
hdb: lost interrupt
hdb: lost interrupt
hdb: irq timeout: status=0x10 { SeekComplete }

hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: lost interrupt
hdb: read_intr: status=0xd8 { Busy }

ide0: reset timed-out, status=0x80
end_request: I/O error, dev 03:40 (hdb), sector 28
end_request: I/O error, dev 03:40 (hdb), sector 30
end_request: I/O error, dev 03:40 (hdb), sector 28
end_request: I/O error, dev 03:40 (hdb), sector 30
unable to read partition table
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 792k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
hdc: attached ide-scsi driver.
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PIONEER Model: DVD-ROM DVD-106 Rev: 1.22
Type: CD-ROM ANSI SCSI revision: 02
Vendor: TEAC Model: CD-W540E Rev: 2.4A
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 15x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
GDT: Storage RAID Controller Driver. Version: 2.05
GDT: Found 0 PCI Storage RAID Controllers
megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
Highpoint HPT370 Softwareraid driver for linux version 0.02
end_request: I/O error, dev 03:40 (hdb), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 03:40 (hdb), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 03:40 (hdb), sector 8
hptraid: Error reading superblock.
end_request: I/O error, dev 03:40 (hdb), sector 8
hptraid: Error reading superblock.
megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003)
megaraid: no BIOS enabled.
end_request: I/O error, dev 03:40 (hdb), sector 2083832
pdcraid: Error reading superblock.
end_request: I/O error, dev 03:40 (hdb), sector 2083832
pdcraid: Error reading superblock.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Guestimating sector 2083695 for superblock
end_request: I/O error, dev 03:40 (hdb), sector 2083688
silraid: Error reading superblock.
driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:48:59 Apr 17 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb-ohci.c: USB OHCI at membase 0xf0b3e000, IRQ 19
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
usb-ohci.c: USB OHCI at membase 0xf0b40000, IRQ 23
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
blk: queue c0359328, I/O limit 4095Mb (mask 0xffffffff)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.01
cloop: loaded (max 8 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 28754 blocks, 65536 bytes/block, largest block is 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 140k freed
Real Time Clock Driver v1.10f
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
usb-uhci.c: $Revision: 1.275 $ time 19:48:59 Apr 17 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xf0c2a000, 00:0e:2e:0c:c1:d1, IRQ 18
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
cmpci: version $Revision: 6.16 $ time 19:47:57 Apr 17 2004
cmpci: found CM8738 adapter at io 0xa000 irq 17
cmpci: chip version = 055
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: Detected SiS 745 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
end_request: I/O error, dev 03:40 (hdb), sector 0
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[drm] AGP 0.99 Aperture @ 0xe8000000 64MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1


Last edited by kpachopoulos; 01-29-2005 at 01:24 PM.
 
Old 01-29-2005, 02:59 PM   #2
Megamieuwsel
Member
 
Registered: Sep 2002
Location: Haarlem , the Netherlands
Distribution: VectorLinux SOHO 5.1
Posts: 470

Rep: Reputation: 35
Open box.
Check IDE-cable.
Check power-cable.(to drive)

If those are OK and your BIOS still can't find your primary master , be prepared to pay tribute to the computer-store.(ie.-That'll be a new drive then.)
 
Old 01-29-2005, 08:17 PM   #3
BajaNick
Senior Member
 
Registered: Jul 2003
Location: So. Cal.
Distribution: Slack 11
Posts: 1,737

Rep: Reputation: 46
Are the drive jumpers configured properly on the back of the drive. Remember the second drive must be jumpered as slave and on the correct end of the ide cable.
 
Old 01-30-2005, 02:59 AM   #4
kpachopoulos
Member
 
Registered: Feb 2004
Location: Athens, Greece
Distribution: Gentoo,FreeBSD, Debian
Posts: 705

Original Poster
Rep: Reputation: 30
I played around with my BIOS, restarted some times and the problem was fixed (i don't think it had to do with the BIOS however) The first time before it started booting right, the BIOS also complained, that it couldn't find the keyboard! I pressed F1 to continue and everything went smoothly. The next time i booted there wasn't any complain at all.
All these are very strange and i am still investigating. Could it be a problem with my motherboard?

Last edited by kpachopoulos; 01-30-2005 at 03:05 AM.
 
Old 01-30-2005, 11:50 AM   #5
BajaNick
Senior Member
 
Registered: Jul 2003
Location: So. Cal.
Distribution: Slack 11
Posts: 1,737

Rep: Reputation: 46
How old is the MB? Try updating the bios firmware, if necessary. Go to the MB manufacturers website, Download the bios update and follow the directions carefully.
 
Old 01-30-2005, 02:27 PM   #6
kpachopoulos
Member
 
Registered: Feb 2004
Location: Athens, Greece
Distribution: Gentoo,FreeBSD, Debian
Posts: 705

Original Poster
Rep: Reputation: 30
The m/b is about 3 years old, but could an old bios cause such a problem?
 
Old 02-01-2005, 09:41 PM   #7
BajaNick
Senior Member
 
Registered: Jul 2003
Location: So. Cal.
Distribution: Slack 11
Posts: 1,737

Rep: Reputation: 46
It could if the jumper is set to slave but if it was used previously as master then it probably would not. It does sound like its a bios or MBR problem.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Unable to find the Domain Master Browser error in samba vrillusions Linux - Networking 2 02-10-2011 10:40 PM
How can I connect my SATA HD physically so that it is the First IDE Primary Master? Basel Linux - Hardware 8 10-27-2005 11:33 AM
Harddisk...primary, secondary, master, slave? OmniXBro Linux - Newbie 8 03-08-2005 09:45 PM
Script - Find primary group quack322 Programming 3 01-02-2005 04:13 AM
boot loader, MBR, redhat9 on primary slave, winxp on primary master samik Linux - Hardware 4 10-15-2003 08:55 PM

LinuxQuestions.org > Forums > Non-*NIX Forums > General

All times are GMT -5. The time now is 01:35 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration