-   General (
-   -   CISCO ASA5510 config port for public IP (

mnauta 03-26-2013 01:58 PM

CISCO ASA5510 config port for public IP

I have tried this question with Cisco support, but so far no luck with resolving it. Maybe someone can assist me with the following issue:

I have computer inside the LAN that needs to use a PUBLIC IP address and connect to a server on the internet. In other words it needs to completely be unfiltered and access the internet directly when connected to Ethernet0/2. With our old ASA5505 we created a Vlan and then allowed the interface to access the outside. Seems a bit different in the ASA5510.

Cisco support suggested the following:
interface Ethernet0/2
nameif unfiltered
security-level 100
ip address

This does not work because I can't assign a public IP to the computer hooked up to Ethernet0/2 with this config.

Any ideas how to get this working would be appreciated.

Computer w/PUBLIC IP ----> inside ---> ASA5510 ---> outside ----->www


mnauta 03-26-2013 02:32 PM

I just resolved the issue :)

All times are GMT -5. The time now is 03:53 PM.