127.0.0.1 No response received -- 1000ms
Hi mates
i have rented a cisco 515E pix firewall, but the pix supplier made a statement the for config, he will be charging more...so i started configuring the pix on my own using the console cable i got into the device. now the issue is i enabled the telnet to get access from inside. but i am not able to reach the pix so i tried pinging eth1 and eth0 by doing the following 1.Ping inside 192.168.1.1 response received -- 0ms 2.ping outside 202.145.89.2 response received -- 0ms So the self pinging is successful now try 3. ping inside 192.168.1.102 but the result made weired.. No responses received -- 1000ms same case in outside also.. i have connected properly both inside and outside interfaces what could be the problem howto solve it now? |
Are you sure you have given 192.168.1.102 t to any interface? And, check again routing.
|
All times are GMT -5. The time now is 05:50 PM. |