| polemon |
03-04-2013 04:58 PM |
OpenGL rendering on Fedora 18 with an Intel Corporation 82852/855GM not working?
On an older laptop that runs Fedora 18, and has a Intel Corporation 82852/855GM Integrated Graphics Device, I cannot get OpenGL to run on it.
In fact, I have no 3D acceleration whatsoever. I have the correct drivers installed, but I can't get OpenGL to work.
glxinfo reports:
Code:
name of display: :0.0
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 152 (GLX)
Minor opcode of failed request: 3 (X_GLXCreateContext)
Serial number of failed request: 22
Current serial number in output stream: 25
In fact no GLX application will start, all of them stop with the same error message.
Do I have to enable it in the Kernel or put something into xorg.conf?
It might have something to do with this bug: https://bugs.launchpad.net/ubuntu/+s...l/+bug/1071530
I'm not sure, though.
I tried downgrading my mesa drivers, but I can't really downgrade that far, I can only downgrade one minor version contained in the repos.
There have been a couple of upgrades recently, but none of them solved the issue.
I doubt it'll help, but here's the contents of xorg.0.log:
Code:
[ 62.659]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 62.659] X Protocol Version 11, Revision 0
[ 62.659] Build Operating System: 2.6.32-279.9.1.el6.x86_64
[ 62.659] Current Operating System: Linux Vigor13 3.7.4-204.fc18.i686 #1 SMP Wed Jan 23 17:08:59 UTC 2013 i686
[ 62.659] Kernel command line: BOOT_IMAGE=/vmlinuz-3.7.4-204.fc18.i686 root=/dev/mapper/fedora_vigor13-root ro rd.md=0 rd.dm=0 rd.lvm.lv=fedora_vigor13/swap rd.luks.uuid=luks-d51eb899-1981-4a05-bd74-b3405f14c045 vconsole.keymap=de rd.lvm.lv=fedora_vigor13/root rhgb quiet LANG=en_US.UTF-8
[ 62.659] Build Date: 09 January 2013 03:43:33AM
[ 62.659] Build ID: xorg-x11-server 1.13.1-4.fc18
[ 62.659] Current version of pixman: 0.26.2
[ 62.659] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 62.659] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 62.661] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 27 10:59:49 2013
[ 62.721] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 62.721] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 62.742] (==) No Layout section. Using the first Screen section.
[ 62.742] (==) No screen section available. Using defaults.
[ 62.742] (**) |-->Screen "Default Screen Section" (0)
[ 62.742] (**) | |-->Monitor "<default monitor>"
[ 62.772] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 62.772] (==) Automatically adding devices
[ 62.772] (==) Automatically enabling devices
[ 62.772] (==) Automatically adding GPU devices
[ 62.772] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 62.772] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 62.772] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 62.772] (II) Loader magic: 0x8263680
[ 62.772] (II) Module ABI versions:
[ 62.772] X.Org ANSI C Emulation: 0.4
[ 62.772] X.Org Video Driver: 13.1
[ 62.772] X.Org XInput driver : 18.0
[ 62.772] X.Org Server Extension : 7.0
[ 62.772] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 62.775] (--) PCI:*(0:0:2:0) 8086:3582:1179:0033 rev 2, Mem @ 0xd8000000/134217728, 0xd0000000/524288, I/O @ 0x0000eff8/8, BIOS @ 0x????????/131072
[ 62.775] (--) PCI: (0:0:2:1) 8086:3582:1179:0033 rev 2, Mem @ 0x40000000/134217728, 0x4c000000/524288, BIOS @ 0x????????/65536
[ 62.783] Initializing built-in extension Generic Event Extension
[ 62.783] Initializing built-in extension SHAPE
[ 62.783] Initializing built-in extension MIT-SHM
[ 62.783] Initializing built-in extension XInputExtension
[ 62.783] Initializing built-in extension XTEST
[ 62.784] Initializing built-in extension BIG-REQUESTS
[ 62.784] Initializing built-in extension SYNC
[ 62.784] Initializing built-in extension XKEYBOARD
[ 62.784] Initializing built-in extension XC-MISC
[ 62.784] Initializing built-in extension XINERAMA
[ 62.784] Initializing built-in extension XFIXES
[ 62.784] Initializing built-in extension RENDER
[ 62.784] Initializing built-in extension RANDR
[ 62.784] Initializing built-in extension COMPOSITE
[ 62.784] Initializing built-in extension DAMAGE
[ 62.784] Initializing built-in extension MIT-SCREEN-SAVER
[ 62.784] Initializing built-in extension DOUBLE-BUFFER
[ 62.784] Initializing built-in extension RECORD
[ 62.784] Initializing built-in extension DPMS
[ 62.784] Initializing built-in extension X-Resource
[ 62.784] Initializing built-in extension XVideo
[ 62.784] Initializing built-in extension XVideo-MotionCompensation
[ 62.784] Initializing built-in extension SELinux
[ 62.784] Initializing built-in extension XFree86-VidModeExtension
[ 62.784] Initializing built-in extension XFree86-DGA
[ 62.784] Initializing built-in extension XFree86-DRI
[ 62.784] Initializing built-in extension DRI2
[ 62.784] (II) LoadModule: "glx"
[ 62.799] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 62.800] (II) Module glx: vendor="X.Org Foundation"
[ 62.800] compiled for 1.13.1, module version = 1.0.0
[ 62.800] ABI class: X.Org Server Extension, version 7.0
[ 62.800] (==) AIGLX enabled
[ 62.800] Loading extension GLX
[ 62.800] (==) Matched intel as autoconfigured driver 0
[ 62.800] (==) Matched intel as autoconfigured driver 1
[ 62.800] (==) Matched vesa as autoconfigured driver 2
[ 62.800] (==) Matched modesetting as autoconfigured driver 3
[ 62.800] (==) Matched fbdev as autoconfigured driver 4
[ 62.800] (==) Assigned the driver to the xf86ConfigLayout
[ 62.800] (II) LoadModule: "intel"
[ 62.800] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 62.817] (II) Module intel: vendor="X.Org Foundation"
[ 62.817] compiled for 1.13.0, module version = 2.20.17
[ 62.817] Module class: X.Org Video Driver
[ 62.817] ABI class: X.Org Video Driver, version 13.0
[ 62.817] (II) LoadModule: "vesa"
[ 62.817] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 62.818] (II) Module vesa: vendor="X.Org Foundation"
[ 62.818] compiled for 1.12.99.902, module version = 2.3.2
[ 62.818] Module class: X.Org Video Driver
[ 62.818] ABI class: X.Org Video Driver, version 13.0
[ 62.818] (II) LoadModule: "modesetting"
[ 62.818] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 62.829] (II) Module modesetting: vendor="X.Org Foundation"
[ 62.830] compiled for 1.13.0, module version = 0.6.0
[ 62.830] Module class: X.Org Video Driver
[ 62.830] ABI class: X.Org Video Driver, version 13.0
[ 62.830] (II) LoadModule: "fbdev"
[ 62.830] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 62.830] (II) Module fbdev: vendor="X.Org Foundation"
[ 62.830] compiled for 1.12.99.902, module version = 0.4.3
[ 62.830] Module class: X.Org Video Driver
[ 62.830] ABI class: X.Org Video Driver, version 13.0
[ 62.830] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 62.831] (II) VESA: driver for VESA chipsets: vesa
[ 62.831] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 62.831] (II) FBDEV: driver for framebuffer: fbdev
[ 62.831] (++) using VT number 1
[ 62.834] (WW) Falling back to old probe method for vesa
[ 62.834] (WW) Falling back to old probe method for modesetting
[ 62.834] (WW) Falling back to old probe method for fbdev
[ 62.834] (II) Loading sub module "fbdevhw"
[ 62.834] (II) LoadModule: "fbdevhw"
[ 62.834] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 62.835] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 62.835] compiled for 1.13.1, module version = 0.0.2
[ 62.835] ABI class: X.Org Video Driver, version 13.1
[ 62.835] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 62.835] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 62.835] (==) intel(0): RGB weight 888
[ 62.835] (==) intel(0): Default visual is TrueColor
[ 62.835] (--) intel(0): Integrated Graphics Chipset: Intel(R) 852GM/855GM
[ 62.835] (**) intel(0): Relaxed fencing disabled
[ 62.835] (**) intel(0): Wait on SwapBuffers? enabled
[ 62.835] (**) intel(0): Triple buffering? enabled
[ 62.835] (**) intel(0): Framebuffer tiled
[ 62.835] (**) intel(0): Pixmaps tiled
[ 62.835] (**) intel(0): 3D buffers tiled
[ 62.835] (**) intel(0): SwapBuffers wait enabled
[ 62.835] (==) intel(0): video overlay key set to 0x101fe
[ 62.835] (II) intel(0): Output LVDS1 has no monitor section
[ 62.837] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 63.006] (II) intel(0): Output VGA1 has no monitor section
[ 63.006] (II) intel(0): EDID for output LVDS1
[ 63.006] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 63.006] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 63.006] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 63.006] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 63.006] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 63.006] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 63.007] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 63.007] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 63.007] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 63.007] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 63.007] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 63.007] (II) intel(0): Printing probed modes for output LVDS1
[ 63.007] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz P)
[ 63.007] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 63.007] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 63.007] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 63.194] (II) intel(0): EDID for output VGA1
[ 63.194] (II) intel(0): Output LVDS1 connected
[ 63.194] (II) intel(0): Output VGA1 disconnected
[ 63.194] (II) intel(0): Using exact sizes for initial modes
[ 63.194] (II) intel(0): Output LVDS1 using initial mode 1024x768 +0+0
[ 63.194] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 63.194] (II) intel(0): Kernel page flipping support detected, enabling
[ 63.194] (==) intel(0): DPI set to (96, 96)
[ 63.194] (II) Loading sub module "fb"
[ 63.194] (II) LoadModule: "fb"
[ 63.362] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 63.363] (II) Module fb: vendor="X.Org Foundation"
[ 63.363] compiled for 1.13.1, module version = 1.0.0
[ 63.363] ABI class: X.Org ANSI C Emulation, version 0.4
[ 63.363] (II) Loading sub module "dri2"
[ 63.363] (II) LoadModule: "dri2"
[ 63.363] (II) Module "dri2" already built-in
[ 63.363] (II) UnloadModule: "vesa"
[ 63.363] (II) Unloading vesa
[ 63.363] (II) UnloadModule: "modesetting"
[ 63.363] (II) Unloading modesetting
[ 63.363] (II) UnloadModule: "fbdev"
[ 63.363] (II) Unloading fbdev
[ 63.363] (II) UnloadSubModule: "fbdevhw"
[ 63.363] (II) Unloading fbdevhw
[ 63.365] (==) Depth 24 pixmap format is 32 bpp
[ 63.418] (II) intel(0): [DRI2] Setup complete
[ 63.418] (II) intel(0): [DRI2] DRI driver: i915
[ 63.418] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 63.480] (II) UXA(0): Driver registered support for the following operations:
[ 63.480] (II) solid
[ 63.480] (II) copy
[ 63.480] (II) composite (RENDER acceleration)
[ 63.480] (II) put_image
[ 63.480] (II) get_image
[ 63.480] (==) intel(0): Backing store disabled
[ 63.480] (==) intel(0): Silken mouse enabled
[ 63.507] (II) intel(0): Initializing HW Cursor
[ 63.507] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 63.517] (==) intel(0): DPMS enabled
[ 63.517] (==) intel(0): Intel XvMC decoder disabled
[ 63.517] (II) intel(0): Set up overlay video
[ 63.517] (II) intel(0): direct rendering: DRI2 Enabled
[ 63.517] (==) intel(0): hotplug detection: "enabled"
[ 63.541] (--) RandR disabled
[ 63.690] (II) SELinux: Disabled by boolean
[ 63.707] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 63.707] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 63.707] (II) AIGLX: enabled GLX_ARB_create_context
[ 63.707] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 63.707] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 63.707] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 63.707] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 63.707] (II) AIGLX: Loaded and initialized i915
[ 63.707] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 63.709] (II) intel(0): Setting screen physical size to 270 x 203
[ 64.023] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 64.023] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 64.023] (**) Power Button: Applying InputClass "anaconda-keyboard"
[ 64.023] (II) LoadModule: "evdev"
[ 64.024] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 64.024] (II) Module evdev: vendor="X.Org Foundation"
[ 64.024] compiled for 1.13.0, module version = 2.7.3
[ 64.024] Module class: X.Org XInput Driver
[ 64.024] ABI class: X.Org XInput driver, version 18.0
[ 64.024] (II) Using input driver 'evdev' for 'Power Button'
[ 64.024] (**) Power Button: always reports core events
[ 64.024] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 64.025] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 64.025] (--) evdev: Power Button: Found keys
[ 64.025] (II) evdev: Power Button: Configuring as keyboard
[ 64.025] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 64.025] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 64.025] (**) Option "xkb_rules" "evdev"
[ 64.025] (**) Option "xkb_model" "evdev"
[ 64.025] (**) Option "xkb_layout" "de"
[ 64.079] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 64.079] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 64.079] (**) Video Bus: Applying InputClass "anaconda-keyboard"
[ 64.079] (II) Using input driver 'evdev' for 'Video Bus'
[ 64.079] (**) Video Bus: always reports core events
[ 64.079] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 64.079] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 64.079] (--) evdev: Video Bus: Found keys
[ 64.079] (II) evdev: Video Bus: Configuring as keyboard
[ 64.079] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5/event5"
[ 64.079] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 64.079] (**) Option "xkb_rules" "evdev"
[ 64.079] (**) Option "xkb_model" "evdev"
[ 64.079] (**) Option "xkb_layout" "de"
[ 64.083] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 64.083] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 64.083] (**) Power Button: Applying InputClass "anaconda-keyboard"
[ 64.083] (II) Using input driver 'evdev' for 'Power Button'
[ 64.083] (**) Power Button: always reports core events
[ 64.083] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 64.083] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 64.083] (--) evdev: Power Button: Found keys
[ 64.084] (II) evdev: Power Button: Configuring as keyboard
[ 64.084] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 64.084] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 64.084] (**) Option "xkb_rules" "evdev"
[ 64.084] (**) Option "xkb_model" "evdev"
[ 64.084] (**) Option "xkb_layout" "de"
[ 64.087] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 64.087] (II) No input driver specified, ignoring this device.
[ 64.087] (II) This device may have been added with another device file.
[ 64.088] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 64.088] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 64.088] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 64.088] (**) AT Translated Set 2 keyboard: Applying InputClass "anaconda-keyboard"
[ 64.088] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 64.088] (**) AT Translated Set 2 keyboard: always reports core events
[ 64.088] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 64.088] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 64.088] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 64.088] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 64.088] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 64.088] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 64.088] (**) Option "xkb_rules" "evdev"
[ 64.088] (**) Option "xkb_model" "evdev"
[ 64.088] (**) Option "xkb_layout" "de"
[ 64.098] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event4)
[ 64.098] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 64.098] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[ 64.098] (**) PS/2 Mouse: always reports core events
[ 64.098] (**) evdev: PS/2 Mouse: Device: "/dev/input/event4"
[ 64.098] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[ 64.098] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[ 64.098] (--) evdev: PS/2 Mouse: Found relative axes
[ 64.098] (--) evdev: PS/2 Mouse: Found x and y relative axes
[ 64.100] (II) evdev: PS/2 Mouse: Configuring as mouse
[ 64.100] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 64.100] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 64.100] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 64.100] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 10)
[ 64.100] (II) evdev: PS/2 Mouse: initialized for relative axes.
[ 64.102] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 64.102] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 64.102] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 64.102] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 64.102] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 64.102] (II) No input driver specified, ignoring this device.
[ 64.102] (II) This device may have been added with another device file.
[ 64.104] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[ 64.104] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 64.104] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 64.104] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
[ 64.104] (II) LoadModule: "synaptics"
[ 64.105] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 64.105] (II) Module synaptics: vendor="X.Org Foundation"
[ 64.105] compiled for 1.13.0, module version = 1.6.2
[ 64.105] Module class: X.Org XInput Driver
[ 64.105] ABI class: X.Org XInput driver, version 18.0
[ 64.105] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 64.111] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 64.111] (**) Option "Device" "/dev/input/event6"
[ 64.111] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 64.111] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 64.111] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 64.111] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[ 64.111] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 64.111] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[ 64.111] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
[ 64.111] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 64.111] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 64.111] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 64.111] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
[ 64.111] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 64.111] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 64.111] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 64.111] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 64.111] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 64.111] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 64.111] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 64.113] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[ 64.113] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 64.113] (II) No input driver specified, ignoring this device.
[ 64.113] (II) This device may have been added with another device file.
[ 64.115] (II) config/udev: Adding input device Toshiba input device (/dev/input/event7)
[ 64.115] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[ 64.115] (**) Toshiba input device: Applying InputClass "anaconda-keyboard"
[ 64.115] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 64.115] (**) Toshiba input device: always reports core events
[ 64.115] (**) evdev: Toshiba input device: Device: "/dev/input/event7"
[ 64.115] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 64.115] (--) evdev: Toshiba input device: Found keys
[ 64.115] (II) evdev: Toshiba input device: Configuring as keyboard
[ 64.115] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 64.115] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 12)
[ 64.115] (**) Option "xkb_rules" "evdev"
[ 64.115] (**) Option "xkb_model" "evdev"
[ 64.115] (**) Option "xkb_layout" "de"
[ 40465.465] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 40474.084] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 40475.763] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
And here's the output of lspci:
Code:
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
01:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
01:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 33)
The Worst-Case scenario would be to "wait" until Fedora 19 and see if it solves things. Not having 3D acceleration is unfortunate, but not essential in my case. It's still annoying, though. |
