core2 + motorola v300 usb phone
 

I had my motorola v300 almost working for data(ppp) under core1. It locked up after a minute or 2 of transfer, similar to a problem reported by others (but none of their fixes worked for me.) But while it was working it did connect and could ping sites at will.

In core2 I can't even get pppd to open the phone device file. I tired the same device file as with core1:

crw-rw---- 1 root uucp 166, 1 Feb 23 15:02 ttyACM1

as well as any others I could think of. Here is the command:

/usr/sbin/pppd connect \
'/usr/sbin/chat -v ABORT "NO CARRIER" "" "AT&F" OK \"AT+CGDCONT=1,\"IP\",\"internet2.voicestream.com\"" OK "ATDT*99#" CONNECT' \
/dev/input/ttyACM1 57600 lcp-echo-interval 0 lcp-echo-failure 0 \
defaultroute crtscts noauth \
deflate 0 debug asyncmap 0 noipdefault

The backslashes got a little confused in the truncated display above, but this is the script that sort-of-works on core1 so they're not the problem. Any suggestions will be appreciated.

Paul

how you connect the cel!?
 

hi, paul, i have the moto cel and usb cable, can u tell me how can u conect the cel motorola v300 in a linux.
tank you !!

As should be obvious from my initial post, I can't tell you how to get the phone working under linux.

Paul