LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Fedora
User Name
Password
Fedora This forum is for the discussion of the Fedora Project.

Notices


Reply
  Search this Thread
Old 06-25-2004, 12:26 AM   #1
KarmaKill
LQ Newbie
 
Registered: Jun 2004
Location: Miami Eastern USA
Distribution: Fedora
Posts: 24

Rep: Reputation: 15
Burning ISO


Im new to fedora (linux really)
I had to switch to 8k stack for NVIDIA
but here is my proble
Code:
[root@localhost Desktop]# cdrecord -scanbus Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.80-RH '@(#)scsi-linux-sg.c        1.80 04/03/08 Copyright 1997 J. Schilling').
scsibus1:
        1,0,0   100) '        ' '52X24X52 CD-RW  ' '1.06' Removable CD-ROM
        1,1,0   101) *
        1,2,0   102) *
        1,3,0   103) *
        1,4,0   104) *
        1,5,0   105) *
        1,6,0   106) *
        1,7,0   107) *
[root@localhost Desktop]# cdrecord -v dev=1,0,0 speed=2 *.iso cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
cdrecord: No such file or directory. Cannot open '/dev/sg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
[root@localhost Desktop]#
Every thing i know is right up there... PLease Help
 
Old 06-25-2004, 02:51 AM   #2
Andrew Benton
Senior Member
 
Registered: Aug 2003
Location: Birkenhead/Britain
Distribution: Linux From Scratch
Posts: 2,073

Rep: Reputation: 64
Become root then change the permissions on /dev/sg0 and /dev/sg1 to allow anyone to write to them

su
password
chmod 666 /dev/sg0 /dev/sg1

Edit - Oh, sorry, it says "No such file or directory" doesn't it, so if that's the case, make the nodes with

su
password
mknod -m666 /dev/sg0 c 21 0
mknod -m666 /dev/sg1 c 21 1

Last edited by Andrew Benton; 06-25-2004 at 02:55 AM.
 
Old 06-25-2004, 08:30 AM   #3
KarmaKill
LQ Newbie
 
Registered: Jun 2004
Location: Miami Eastern USA
Distribution: Fedora
Posts: 24

Original Poster
Rep: Reputation: 15
:(

Quote:
Originally posted by Andrew Benton
Become root then change the permissions on /dev/sg0 and /dev/sg1 to allow anyone to write to them

su
password
chmod 666 /dev/sg0 /dev/sg1

This command went throught fine. But it still doesnt work.
Quote:
Edit - Oh, sorry, it says "No such file or directory" doesn't it, so if that's the case, make the nodes with

su
password
mknod -m666 /dev/sg0 c 21 0
mknod -m666 /dev/sg1 c 21 1
This one said
Code:
[root@localhost Desktop]# mknod -m666 /dev/sg1 c 21 1 
mknod: `/dev/sg1': File exists
[root@localhost Desktop]#
 
Old 06-25-2004, 09:28 AM   #4
motub
Senior Member
 
Registered: Sep 2003
Location: The Netherlands
Distribution: Gentoo (main); SuSE 9.3 (fallback)
Posts: 1,607

Rep: Reputation: 46
Quote:
Originally posted by Andrew Benton
Become root then change the permissions on /dev/sg0 and /dev/sg1 to allow anyone to write to them

su
password
chmod 666 /dev/sg0 /dev/sg1
Quote:
Originally posted by KarmaKill
This command went throught fine. But it still doesnt work.
KarmaKill, stupid question, but did you unmount and remount the drive between changing the permisions and trying to use it?

Even stupider question, is the DVD drive you're trying to clone from even mounted at all?
 
Old 06-25-2004, 10:24 AM   #5
KarmaKill
LQ Newbie
 
Registered: Jun 2004
Location: Miami Eastern USA
Distribution: Fedora
Posts: 24

Original Poster
Rep: Reputation: 15
Quote:
Originally posted by motub
KarmaKill, stupid question, but did you unmount and remount the drive between changing the permisions and trying to use it?

Even stupider question, is the DVD drive you're trying to clone from even mounted at all?
My RW is mounted on /mnt/cdrom

If it needs to be mounted please tell me how to do so.
 
Old 06-25-2004, 10:31 AM   #6
motub
Senior Member
 
Registered: Sep 2003
Location: The Netherlands
Distribution: Gentoo (main); SuSE 9.3 (fallback)
Posts: 1,607

Rep: Reputation: 46
Well, its quite possible that I'm confused, but from reading the original output that you posted, my understanding was that you are trying to clone (copy) the media in /dev/sg* (which I assume is a DVD drive) to the (blank) media at /mnt/cdrom (which I assume is /dev/hdc or something originally).

Am I mistaken?
 
Old 06-25-2004, 11:48 AM   #7
KarmaKill
LQ Newbie
 
Registered: Jun 2004
Location: Miami Eastern USA
Distribution: Fedora
Posts: 24

Original Poster
Rep: Reputation: 15
Quote:
Originally posted by motub
Well, its quite possible that I'm confused, but from reading the original output that you posted, my understanding was that you are trying to clone (copy) the media in /dev/sg* (which I assume is a DVD drive) to the (blank) media at /mnt/cdrom (which I assume is /dev/hdc or something originally).

Am I mistaken?
No im tring to burn a cd from an ISO with my burner on /mnt/cdrom
 
Old 06-26-2004, 12:45 AM   #8
KarmaKill
LQ Newbie
 
Registered: Jun 2004
Location: Miami Eastern USA
Distribution: Fedora
Posts: 24

Original Poster
Rep: Reputation: 15
Bump

How do I mount my cd recorder
 
Old 06-26-2004, 12:50 AM   #9
motub
Senior Member
 
Registered: Sep 2003
Location: The Netherlands
Distribution: Gentoo (main); SuSE 9.3 (fallback)
Posts: 1,607

Rep: Reputation: 46
You don't need to mount your CD recorder to burn a CD. In fact you should not mount your CD recorder to burn a CD. I thought you were copying from another device (a DVD drive) to the CD recorder, and had you been doing that, the other device would have had to be mounted, not the CD recorder.

So we're essentially back to square 1.
 
Old 06-26-2004, 01:08 AM   #10
KarmaKill
LQ Newbie
 
Registered: Jun 2004
Location: Miami Eastern USA
Distribution: Fedora
Posts: 24

Original Poster
Rep: Reputation: 15
....

So what the in this Fedora should i do.i just want to burn an iso on my Atapi CD-RW
 
Old 06-26-2004, 09:06 AM   #11
motub
Senior Member
 
Registered: Sep 2003
Location: The Netherlands
Distribution: Gentoo (main); SuSE 9.3 (fallback)
Posts: 1,607

Rep: Reputation: 46
According to a thread on the gentoo-users mailing list, you might try

cdrecord --scanbus dev=ATAPI , or even cdrecord --scanbus dev=ATA , since 'ATA' is listed as both the devname and the scsidev name in the initial output.

Quote:
scsidev: 'ATA'
devname: 'ATA'
Alternatively, you might try reading cdrecord dev=help as mentioned in the error message. Are you using a 2.6 series kernel? Are you using ide-scsi? Basically, the SCSI driver listed here
Quote:
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
does not seem to be working for some reason.

Since the original scanbus tells you that the dev name and scsidev name apparently don't use them (they're found as 'ATA' before being scanned by these sg drivers), maybe there's something wrong with the drivers (or your setup is not configured to use them), so maybe trying something else will work.
 
Old 06-26-2004, 09:12 AM   #12
wiraone
Member
 
Registered: Nov 2003
Location: Diawang-awangan
Distribution: Ubuntu Hoary!
Posts: 319

Rep: Reputation: 30
To burn ISO file (FC2/2.6.7), I use the following:

$ cdrecord dev=/dev/hdd filename.iso

That is it .. and I just burned one ISO yesterday
 
Old 06-26-2004, 12:01 PM   #13
KarmaKill
LQ Newbie
 
Registered: Jun 2004
Location: Miami Eastern USA
Distribution: Fedora
Posts: 24

Original Poster
Rep: Reputation: 15
Quote:
Originally posted by motub
According to a thread on the gentoo-users mailing list, you might try

cdrecord --scanbus dev=ATAPI , or even cdrecord --scanbus dev=ATA , since 'ATA' is listed as both the devname and the scsidev name in the initial output.



Alternatively, you might try reading cdrecord dev=help as mentioned in the error message. Are you using a 2.6 series kernel? Are you using ide-scsi? Basically, the SCSI driver listed here

does not seem to be working for some reason.

Since the original scanbus tells you that the dev name and scsidev name apparently don't use them (they're found as 'ATA' before being scanned by these sg drivers), maybe there's something wrong with the drivers (or your setup is not configured to use them), so maybe trying something else will work.
I get the same out put as my orginal post. I think i lies so where in the loading of the SCSI drivers but i have no clue how to fix this. PLease Help
 
Old 06-26-2004, 12:40 PM   #14
motub
Senior Member
 
Registered: Sep 2003
Location: The Netherlands
Distribution: Gentoo (main); SuSE 9.3 (fallback)
Posts: 1,607

Rep: Reputation: 46
Is there some reason that you can't install a standard version of cdrecord, or a GUI program such as k3b, eroaster or gnome toaster to see if the problem is not contained in these words
Quote:
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.

Note: Please send bug reports or support requests to <warly@mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this version.
 
Old 06-26-2004, 01:16 PM   #15
KarmaKill
LQ Newbie
 
Registered: Jun 2004
Location: Miami Eastern USA
Distribution: Fedora
Posts: 24

Original Poster
Rep: Reputation: 15
Quote:
Originally posted by motub
Is there some reason that you can't install a standard version of cdrecord, or a GUI program such as k3b, eroaster or gnome toaster to see if the problem is not contained in these words
I have gearGUI but it doesnt find my recording device.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
ISO Burning noobtesting Linux - Software 2 04-30-2004 10:51 PM
Burning ISO BW~Merlin Linux - Newbie 7 04-21-2004 12:27 AM
Burning the .iso to a cd johann519 Fedora - Installation 4 01-31-2004 03:15 PM
Burning an iso 10dedfish Linux - Newbie 2 07-23-2003 03:38 PM
Need help burning .iso cd ksgill Linux - Software 3 06-21-2003 11:08 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Fedora

All times are GMT -5. The time now is 01:37 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration