Hello everybody!
I set up a Debian Sarge and unfortunatelly I can't get my HP 656C printer to print.
I have set up usb support (I also have kernel 2.6.8), and my usb storage card mounts perfectly....
Code:
frost:/etc/init.d# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 003: ID 03f0:2304 Hewlett-Packard DeskJet 656c
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 126f:1325 TwinMOS Mobile Disk
Bus 001 Device 001: ID 0000:0000
Code:
frost:/etc/init.d# lsmod
Module Size Used by
smbfs 65908 0
usblp 12928 0
appletalk 34892 2
ipx 28708 2
p8022 3072 1 ipx
psnap 4612 2 appletalk,ipx
llc 8596 2 p8022,psnap
agpgart 34664 0
nvidia 3469312 12
parport_pc 39744 1
lp 11104 0
parport 42048 2 parport_pc,lp
nls_iso8859_1 4608 3
nls_cp437 6272 3
tvaudio 21888 0
tuner 19204 0
bttv 150240 0
video_buf 21888 1 bttv
v4l2_common 6784 1 bttv
btcx_risc 5124 1 bttv
videodev 10240 1 bttv
via82cxxx_audio 27016 1
ac97_codec 17920 1 via82cxxx_audio
I have uhi-hcd and his friends compiled into the kernel...
/dev/usb/lp0 exists, but the printer wouldn't print (a CUPS test page)
What am I missing?
Thanks!