LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian
User Name
Password
Debian This forum is for the discussion of Debian Linux.

Notices


Reply
  Search this Thread
Old 10-06-2011, 07:07 PM   #1
mike4ty4
Member
 
Registered: May 2010
Posts: 43

Rep: Reputation: 0
Trouble with old Sun Sparc machine (X not working)


Hi.

I was trying to use Debian GNU/Linux "Squeeze" on a real old Sun (SPARC) machine (a Sun Blade 100) with home-compiled kernel v3.0.4.

When I try and use X, it fails and I get the following output in the log (note the bit about module "mach64" not being found):

Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-bpo.5-sparc64-smp sparc Debian
Current Operating System: Linux sgc0-server 3.0.4 #2 Thu Oct 6 14:17:04 MDT 2011 sparc64
Kernel command line: root=/dev/hda2 ro
Build Date: 19 February 2011  02:54:47PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  6 17:25:06 2011
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d89e4
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI: (0:0:3:0) 10b9:7101:0000:0000 ALi Corporation M7101 Power Management Controller [PMU] rev 0, Mem @ 0x00000000/1, 0x00000000/1, 0x00000000/1, 0x00000000/1, 0x00000000/1, BIOS @ 0x????????/1
(--) PCI:*(0:0:19:0) 1002:4752:0000:0000 ATI Technologies Inc Rage XL rev 39, Mem @ 0x04000000/16777216, 0x00426000/8192, 0x00000000/1, 0x00000000/1, 0x00000000/1, I/O @ 0x00000b00/256, BIOS @ 0x????????/131072
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "mach64"
(II) Loading /usr/lib/xorg/modules/drivers/mach64_drv.so
(II) Module mach64: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 6.8.2
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) MACH64: Driver for ATI Mach64 chipsets
(II) Primary Device is: PCI 00@00:13:0
(==) MACH64(0): Depth 24, (--) framebuffer bpp 32
(**) MACH64(0): Option "reference_clock" "29.500MHz"
(==) MACH64(0): Using XAA acceleration architecture
(II) MACH64: Mach64 in slot 0:19:0 detected.
(II) MACH64(0): BIOS Data:  BIOSSize=0x0000, ROMTable=0x0000.
(II) MACH64(0): BIOS Data:  ClockTable=0x0000, FrequencyTable=0x0000.
(II) MACH64(0): BIOS Data:  LCDTable=0x0000.
(II) MACH64(0): BIOS Data:  VideoTable=0x0000, HardwareTable=0x0000.
(II) MACH64(0): BIOS Data:  I2CType=0x00, Tuner=0x00, Decoder=0x00, Audio=0x0F.
(--) MACH64(0): ATI 3D Rage XL or XC graphics controller detected.
(--) MACH64(0): Chip type 4752 "GR", version 7, foundry TSMC, class 0, revision 0x00.
(--) MACH64(0): PCI bus interface detected.
(--) MACH64(0): ATI Mach64 adapter detected.
(!!) MACH64(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(--) MACH64(0): Internal RAMDAC (subtype 1) detected.
(==) MACH64(0): RGB weight 888
(==) MACH64(0): Default visual is TrueColor
(==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
(II) MACH64(0): Using Mach64 accelerator CRTC.
(II) MACH64(0): Storing hardware cursor image at 0x047FFC00.
(II) MACH64(0): Using 8 MB linear aperture at 0x04800000.
(!!) MACH64(0): Virtual resolutions will be limited to 8191 kB
 due to linear aperture size and/or placement of hardware cursor image area.
(II) MACH64(0): Using Block 0 MMIO aperture at 0x00426400.
(II) MACH64(0): Using Block 1 MMIO aperture at 0x00426000.
(II) MACH64(0): MMIO write caching enabled.
(--) MACH64(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) MACH64(0): Cannot shadow an accelerated frame buffer.
(II) MACH64(0): Engine XCLK 62.631 MHz;  Refresh rate code 1.
(--) MACH64(0): Internal programmable clock generator detected.
(--) MACH64(0): Reference clock 29.500 MHz.
(II) MACH64(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) MACH64(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
(WW) MACH64(0): Unable to estimate virtual size
(II) MACH64(0): Maximum clock: 125.00 MHz
(II) MACH64(0): Not using default mode "640x350" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x175" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x400" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x200" (vrefresh out of range)
(II) MACH64(0): Not using default mode "720x400" (vrefresh out of range)
(II) MACH64(0): Not using default mode "360x200" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (hsync out of range)
(II) MACH64(0): Not using default mode "320x240" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "400x300" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "400x300" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "400x300" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MACH64(0): Not using default mode "512x384" (vrefresh out of range)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (hsync out of range)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x960" (hsync out of range)
(II) MACH64(0): Not using default mode "640x480" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "640x480" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (hsync out of range)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "896x672" (hsync out of range)
(II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "928x696" (hsync out of range)
(II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "960x720" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "832x624" (hsync out of range)
(II) MACH64(0): Not using default mode "416x312" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (hsync out of range)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (hsync out of range)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (hsync out of range)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (hsync out of range)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (hsync out of range)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1360x768" (hsync out of range)
(II) MACH64(0): Not using default mode "680x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1360x768" (hsync out of range)
(II) MACH64(0): Not using default mode "680x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (hsync out of range)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1440x900" (hsync out of range)
(II) MACH64(0): Not using default mode "720x450" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1024" (hsync out of range)
(II) MACH64(0): Not using default mode "800x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (hsync out of range)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "960x540" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "960x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) MACH64(0): Virtual size is 800x600 (pitch 800)
(**) MACH64(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MACH64(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) MACH64(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MACH64(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) MACH64(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MACH64(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) MACH64(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MACH64(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) MACH64(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MACH64(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) MACH64(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) MACH64(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) MACH64(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.2.1
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MACH64(0): I2C bus "Mach64" initialized.
(--) Depth 24 pixmap format is 32 bpp
(II) MACH64(0): [drm] SAREA 2200+1208: 3408
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
[drm] failed to load kernel module "mach64"
(EE) [drm] drmOpen failed.
(EE) MACH64(0): [dri] DRIScreenInit Failed
(II) MACH64(0): Largest offscreen areas (with overlaps):
(II) MACH64(0): 	800 x 2021 rectangle at 0,600
(II) MACH64(0): 	96 x 2022 rectangle at 0,600
(II) MACH64(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Setting up tile and stipple cache:
		32 128x128 slots
		14 256x256 slots
(==) MACH64(0): Backing store disabled
(==) MACH64(0): Silken mouse enabled
(==) MACH64(0): DPMS enabled
(II) MACH64(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device HID 0430:0005 (/dev/input/event0)
(**) HID 0430:0005: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) HID 0430:0005: always reports core events
(**) HID 0430:0005: Device: "/dev/input/event0"
(II) HID 0430:0005: Found keys
(II) HID 0430:0005: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 0430:0005" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HID 0430:0100 (/dev/input/event1)
(**) HID 0430:0100: Applying InputClass "evdev pointer catchall"
(**) HID 0430:0100: always reports core events
(**) HID 0430:0100: Device: "/dev/input/event1"
(II) HID 0430:0100: Found 3 mouse buttons
(II) HID 0430:0100: Found relative axes
(II) HID 0430:0100: Found x and y relative axes
(II) HID 0430:0100: Configuring as mouse
(**) HID 0430:0100: YAxisMapping: buttons 4 and 5
(**) HID 0430:0100: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 0430:0100" (type: MOUSE)
(II) HID 0430:0100: initialized for relative axes.
(II) config/udev: Adding input device HID 0430:0100 (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) HID 0430:0005: Close
(II) UnloadModule: "evdev"
(II) HID 0430:0100: Close
(II) UnloadModule: "evdev"
The X configuration is:

Code:
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "dri2"
	Load  "glx"
	Load  "record"
	Load  "extmod"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "probe_sparse"       	# [<bool>]
        #Option     "accel"              	# [<bool>]
        #Option     "crt_display"        	# [<bool>]
        #Option     "composite_sync"     	# [<bool>]
        #Option     "hw_cursor"          	# [<bool>]
        #Option     "force_pci_mode"     	# [<bool>]
        #Option     "dma_mode"           	# <str>
        #Option     "agp_mode"           	# <i>
        #Option     "agp_size"           	# <i>
        #Option     "local_textures"     	# [<bool>]
        #Option     "buffer_size"        	# <i>
        #Option     "mmio_cache"         	# [<bool>]
        #Option     "test_mmio_cache"    	# [<bool>]
        #Option     "panel_display"      	# [<bool>]
        #Option     "reference_clock"    	# <freq>
        #Option     "shadow_fb"          	# [<bool>]
        #Option     "sw_cursor"          	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "RenderAccel"        	# [<bool>]
	Identifier  "Card0"
	Driver      "mach64"
	VendorName  "ATI Technologies Inc"
	BoardName   "Rage XL"
	BusID       "PCI:0:19:0"
	Option      "ReferenceClock" "29.500MHz"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
What could be the problem?
 
Old 10-06-2011, 07:30 PM   #2
evo2
LQ Guru
 
Registered: Jan 2009
Location: Japan
Distribution: Mostly Debian and Scientific Linux
Posts: 5,753

Rep: Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290
Hi,

first a discalaimer: I have no experience running Debian on sparc hardware.

The not found driver is the kernel module for hardware accel. Did you compile this in? One way to get a decent config is to copy the config for the last working kernel. Eg
Code:
cp /boot/config-x.y.z-foo /usr/src/.config
make oldconfig
make menuconfig
fakeroot make-kpkg clean
fakeroot make-kpkg <options> kernel-image kernel-headers
Regardless, X should still work without it, but your xorg.conf seems to be trying to load it. Have you tried running X without an /etc/X11/xorg.conf file (or at least without the dri options)?

Evo2.
 
Old 10-06-2011, 07:40 PM   #3
mike4ty4
Member
 
Registered: May 2010
Posts: 43

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by evo2 View Post
Hi,

first a discalaimer: I have no experience running Debian on sparc hardware.

The not found driver is the kernel module for hardware accel. Did you compile this in? One way to get a decent config is to copy the config for the last working kernel. Eg
Code:
cp /boot/config-x.y.z-foo /usr/src/.config
make oldconfig
make menuconfig
fakeroot make-kpkg clean
fakeroot make-kpkg <options> kernel-image kernel-headers
Regardless, X should still work without it, but your xorg.conf seems to be trying to load it. Have you tried running X without an /etc/X11/xorg.conf file (or at least without the dri options)?

Evo2.
The config I used was that from the original Debian kernel (version 2.6.32-5), mostly. I activated some options for drivers for other devices (wireless card was one). But didn't touch anything related to video. Mach64 driver was selected ("atyfb" driver) in there, but not compiled as a module but rather built-in. Could that be the problem? And I tried commenting out the dri options and it seemed to do pretty much the same thing. (forgot to mention: when X is run, it doesn't just bugger out with the given stuff, rather it goes to a black screen and freezes (and requires a logon from a remote terminal to kill), and after killing I find the given log)
 
Old 10-06-2011, 07:43 PM   #4
evo2
LQ Guru
 
Registered: Jan 2009
Location: Japan
Distribution: Mostly Debian and Scientific Linux
Posts: 5,753

Rep: Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290Reputation: 1290
Hmm, could be worth trying the the driver compiled as a module. Also, please try running X without an xorg.conf

Evo2.
 
Old 10-06-2011, 07:43 PM   #5
Dutch Master
Senior Member
 
Registered: Dec 2005
Posts: 1,686

Rep: Reputation: 124Reputation: 124
Another option is to load the (failsafe) vesa driver. Just replace "mach64" with "vesa" in the Device section of the xorg.conf file. This is the quickest way as it doesn't require a recompiled kernel
 
Old 10-06-2011, 08:37 PM   #6
mike4ty4
Member
 
Registered: May 2010
Posts: 43

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by evo2 View Post
Hmm, could be worth trying the the driver compiled as a module. Also, please try running X without an xorg.conf

Evo2.
I might try the module thing later. However, I just ran without the xorg.conf and got a similar result (only now I get that the video is out of range (monitor complaint), though with a config I can suppress that via setting the ReferenceClock).

Log result:

Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-bpo.5-sparc64-smp sparc Debian
Current Operating System: Linux sgc0-server 3.0.4 #2 Thu Oct 6 14:17:04 MDT 2011 sparc64
Kernel command line: root=/dev/hda2 ro
Build Date: 19 February 2011  02:54:47PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  6 18:39:07 2011
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x1d89e4
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI: (0:0:3:0) 10b9:7101:0000:0000 ALi Corporation M7101 Power Management Controller [PMU] rev 0, Mem @ 0x00000000/1, 0x00000000/1, 0x00000000/1, 0x00000000/1, 0x00000000/1, BIOS @ 0x????????/1
(--) PCI:*(0:0:19:0) 1002:4752:0000:0000 ATI Technologies Inc Rage XL rev 39, Mem @ 0x04000000/16777216, 0x00426000/8192, 0x00000000/1, 0x00000000/1, 0x00000000/1, I/O @ 0x00000b00/256, BIOS @ 0x????????/131072
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched ati as autoconfigured driver 0
(==) Matched sunffb as autoconfigured driver 1
(==) Matched fbdev as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 6.13.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mach64"
(II) Loading /usr/lib/xorg/modules/drivers/mach64_drv.so
(II) Module mach64: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 6.8.2
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "sunffb"
(II) Loading /usr/lib/xorg/modules/drivers/sunffb_drv.so
(II) Module sunffb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.2.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 0.4.2
	ABI class: X.Org Video Driver, version 6.0
(II) MACH64: Driver for ATI Mach64 chipsets
(II) SUNFFB: driver for Creator, Creator 3D and Elite 3D
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:13:0
(WW) Falling back to old probe method for sunffb
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 0.0.2
	ABI class: X.Org Video Driver, version 6.0
(II) MACH64(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
(==) MACH64(0): Depth 24, (--) framebuffer bpp 32
(==) MACH64(0): Using XAA acceleration architecture
(II) MACH64: Mach64 in slot 0:19:0 detected.
(II) MACH64(0): BIOS Data:  BIOSSize=0x0000, ROMTable=0x0000.
(II) MACH64(0): BIOS Data:  ClockTable=0x0000, FrequencyTable=0x0000.
(II) MACH64(0): BIOS Data:  LCDTable=0x0000.
(II) MACH64(0): BIOS Data:  VideoTable=0x0000, HardwareTable=0x0000.
(II) MACH64(0): BIOS Data:  I2CType=0x00, Tuner=0x00, Decoder=0x00, Audio=0x0F.
(--) MACH64(0): ATI 3D Rage XL or XC graphics controller detected.
(--) MACH64(0): Chip type 4752 "GR", version 7, foundry TSMC, class 0, revision 0x00.
(--) MACH64(0): PCI bus interface detected.
(--) MACH64(0): ATI Mach64 adapter detected.
(!!) MACH64(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(--) MACH64(0): Internal RAMDAC (subtype 1) detected.
(==) MACH64(0): RGB weight 888
(==) MACH64(0): Default visual is TrueColor
(==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
(II) MACH64(0): Using Mach64 accelerator CRTC.
(II) MACH64(0): Storing hardware cursor image at 0x047FFC00.
(II) MACH64(0): Using 8 MB linear aperture at 0x04800000.
(!!) MACH64(0): Virtual resolutions will be limited to 8191 kB
 due to linear aperture size and/or placement of hardware cursor image area.
(II) MACH64(0): Using Block 0 MMIO aperture at 0x00426400.
(II) MACH64(0): Using Block 1 MMIO aperture at 0x00426000.
(II) MACH64(0): MMIO write caching enabled.
(--) MACH64(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) MACH64(0): Cannot shadow an accelerated frame buffer.
(II) MACH64(0): Engine XCLK 30.399 MHz;  Refresh rate code 1.
(--) MACH64(0): Internal programmable clock generator detected.
(--) MACH64(0): Reference clock 157.5/11 (14.318) MHz.
(II) MACH64(0): If modes do not work on Ultra 5/10 or Blade 100/150,
	set option "reference_clock" to "28.636 MHz" or "29.5 MHz"
(II) MACH64(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
(II) MACH64(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
(WW) MACH64(0): Unable to estimate virtual size
(II) MACH64(0): Maximum clock:  60.00 MHz
(II) MACH64(0): Not using default mode "640x350" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x175" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x400" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x200" (vrefresh out of range)
(II) MACH64(0): Not using default mode "720x400" (vrefresh out of range)
(II) MACH64(0): Not using default mode "360x200" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (hsync out of range)
(II) MACH64(0): Not using default mode "320x240" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "400x300" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "400x300" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "400x300" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MACH64(0): Not using default mode "512x384" (vrefresh out of range)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "640x480" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "832x624" (hsync out of range)
(II) MACH64(0): Not using default mode "416x312" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1360x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "680x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1360x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "680x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1440x900" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "720x450" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "840x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MACH64(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) MACH64(0): Virtual size is 800x600 (pitch 800)
(**) MACH64(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MACH64(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) MACH64(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MACH64(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) MACH64(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MACH64(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) MACH64(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MACH64(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) MACH64(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MACH64(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) MACH64(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) MACH64(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) MACH64(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.2.1
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MACH64(0): I2C bus "Mach64" initialized.
(II) UnloadModule: "sunffb"
(II) Unloading /usr/lib/xorg/modules/drivers/sunffb_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) MACH64(0): [drm] SAREA 2200+1208: 3408
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
[drm] failed to load kernel module "mach64"
(EE) [drm] drmOpen failed.
(EE) MACH64(0): [dri] DRIScreenInit Failed
(II) MACH64(0): Largest offscreen areas (with overlaps):
(II) MACH64(0): 	800 x 2021 rectangle at 0,600
(II) MACH64(0): 	96 x 2022 rectangle at 0,600
(II) MACH64(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Setting up tile and stipple cache:
		32 128x128 slots
		14 256x256 slots
(==) MACH64(0): Backing store disabled
(==) MACH64(0): Silken mouse enabled
(==) MACH64(0): DPMS enabled
(II) MACH64(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device HID 0430:0005 (/dev/input/event0)
(**) HID 0430:0005: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6.901, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) HID 0430:0005: always reports core events
(**) HID 0430:0005: Device: "/dev/input/event0"
(II) HID 0430:0005: Found keys
(II) HID 0430:0005: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 0430:0005" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device HID 0430:0100 (/dev/input/event1)
(**) HID 0430:0100: Applying InputClass "evdev pointer catchall"
(**) HID 0430:0100: always reports core events
(**) HID 0430:0100: Device: "/dev/input/event1"
(II) HID 0430:0100: Found 3 mouse buttons
(II) HID 0430:0100: Found relative axes
(II) HID 0430:0100: Found x and y relative axes
(II) HID 0430:0100: Configuring as mouse
(**) HID 0430:0100: YAxisMapping: buttons 4 and 5
(**) HID 0430:0100: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 0430:0100" (type: MOUSE)
(II) HID 0430:0100: initialized for relative axes.
(II) config/udev: Adding input device HID 0430:0100 (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) HID 0430:0005: Close
(II) UnloadModule: "evdev"
(II) HID 0430:0100: Close
(II) UnloadModule: "evdev"

Last edited by mike4ty4; 10-06-2011 at 08:39 PM.
 
Old 10-06-2011, 08:53 PM   #7
mike4ty4
Member
 
Registered: May 2010
Posts: 43

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by Dutch Master View Post
Another option is to load the (failsafe) vesa driver. Just replace "mach64" with "vesa" in the Device section of the xorg.conf file. This is the quickest way as it doesn't require a recompiled kernel
Yup. Tried that, and it failed too. This time, it didn't even freeze at a blank screen, instead it just kicked me right back to the command prompt. The error was "(EE) VESA(0): Cannot read V_BIOS (5) Input/output error" and "(EE) Screen(s) found, but none have a usable configuration."

The full log, if it helps (should I keep posting these long logs or not?):

Code:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-bpo.5-sparc64-smp sparc Debian
Current Operating System: Linux sgc0-server 3.0.4 #2 Thu Oct 6 14:17:04 MDT 2011 sparc64
Kernel command line: root=/dev/hda2 ro
Build Date: 19 February 2011  02:54:47PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org>) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  6 19:13:09 2011
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d89e4
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI: (0:0:3:0) 10b9:7101:0000:0000 ALi Corporation M7101 Power Management Controller [PMU] rev 0, Mem @ 0x00000000/1, 0x00000000/1, 0x00000000/1, 0x00000000/1, 0x00000000/1, BIOS @ 0x????????/1
(--) PCI:*(0:0:19:0) 1002:4752:0000:0000 ATI Technologies Inc Rage XL rev 39, Mem @ 0x04000000/16777216, 0x00426000/8192, 0x00000000/1, 0x00000000/1, 0x00000000/1, I/O @ 0x00000b00/256, BIOS @ 0x????????/131072
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 2.3.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:13:0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) VESA(0): initializing int10
(WW) VESA(0): Unable to retrieve all of segment 0x0C0000.
(II) VESA(0): No legacy BIOS found -- trying PCI
(EE) VESA(0): Cannot read V_BIOS (5) Input/output error
(WW) VESA(0): xf86UnMapVidMem: cannot find region for [(nil),0x20000]
(II) UnloadModule: "vesa"
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules/libint10.so
(II) UnloadModule: "vbe"
(II) Unloading /usr/lib/xorg/modules/libvbe.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
 
Old 10-06-2011, 10:07 PM   #8
Dutch Master
Senior Member
 
Registered: Dec 2005
Posts: 1,686

Rep: Reputation: 124Reputation: 124
Right... Well, I'd have to bow out as I too don't have any experience with the SPARC platform...

Question though, you said you took the .config file from the stock 2.6 kernel. Does the system work with said stock 2.6 kernel?
 
Old 10-09-2011, 02:46 PM   #9
mike4ty4
Member
 
Registered: May 2010
Posts: 43

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by Dutch Master View Post
Right... Well, I'd have to bow out as I too don't have any experience with the SPARC platform...

Question though, you said you took the .config file from the stock 2.6 kernel. Does the system work with said stock 2.6 kernel?
New: I just tried that, and it doesn't work -- same problem.

Is there anyone here who might have more experience with the platform?

Last edited by mike4ty4; 10-09-2011 at 02:53 PM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Sun SPARC station 5 aronnok Solaris / OpenSolaris 2 09-11-2005 10:04 AM
Solaris Sparc Sun redhatrosh Solaris / OpenSolaris 4 03-26-2005 12:54 AM
7.3 sparc on Sun 220R graystarr SUSE / openSUSE 0 12-29-2004 06:06 PM
SUN SPARC Mice HELP! pascalsimon Linux - Hardware 1 10-21-2004 07:00 PM
Sun Sparc Zonednode Solaris / OpenSolaris 3 02-13-2004 06:45 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian

All times are GMT -5. The time now is 08:25 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration