Mic setup and testing it (Help Needed)
 

Hi All,
I'm currently using Konotix 2005-5 and trying to set up Skype but can not figure out how to setup the mic and then test it out. My sound card is just a SB Live and it is working just fine. I plugged the mic into the mic port on the card. and looked in Kmix to be sure its muted, now I don't know what program to use to record something to see if it works. Of course in windows they had a small recorder app to do it in but in here I'm lost. Could someone make a few suggestions to get me started Please? Thanks
TitaniumTaz

Your card is probably dsp0 but you can check with:
$ cat /proc/asound/cards

Try to record with:
$ rec -d /dev/dsp0 test.wav

And see if something plays:
$ play test.wav

I'm assuming you use alsa. If not, post what you do use.

Appreciate your answer to my query. I tried what you ask and received no joy. This is what I am getting in the console when I try. Oh Yeah I know the mics good it worked on my windows box before I tried it here.

I know I'm doing something wrong just don't know what, As I'm a long time windows convert.
If you have something more I can try I'll certainly give it a shot. Again A big THANKS for the help.
TitaniumTaz

You forgot to put ' / ' :)

You should correct like this : rec -d /dev/dsp0 test.wav

I hope this helps..

> jj@tazbox:~$ cat /proc/asound/card
> cat: /proc/asound/card: No such file or directory

You missed an "s" there, try: cat /proc/asound/cards

Thanks fellas for taking the time to peruse my quote and get back to me with the suggestions. Unfortunately this morning when I tried to fire up after some mionor repairs i got an error at bootup that I have not seen before and not sure what to do with it. Kanotix was running just great until when I shut down for the adjustments. The error I'm getting is as follows:
***************************************
Error 18: Selected cylinder exceeds the maximum supported by the bios.
Press any key to contiue
***************************************
I haven't a clue what it is referring to and have finally wound up trying to re install. I will try what you suggested when I get it up and running again. Again Thanks a Bunch
TitaniumTaz