LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian
User Name
Password
Debian This forum is for the discussion of Debian Linux.

Notices


Reply
  Search this Thread
Old 03-18-2009, 06:09 AM   #1
Pedroski
Senior Member
 
Registered: Jan 2002
Location: Nanjing, China
Distribution: Ubuntu 18.04
Posts: 1,687

Rep: Reputation: 55
Lost Ubuntu


Had a lot of trouble getting Debian to work on this laptop. The problem was the nvidia graphics card. Finally got it sorted using smxi.org scripts. Specifically sgfxi -c In the meantime, I installed Ubuntu, which somehow could handle the card. At the end of the Debian installation, it asked if I wanted to re-write the Grub configuration. I said ok, and it changed menu.1st, and I don't know what else.
Now, I can't start Ubuntu. Grub comes up with the error: bad file or directory. Press any key to continue. I can start Debian or Win. I can mount /dev/sda8, which is the partition containing Ubuntu, under Debian.

Anyone know how I can get Ubuntu started??
 
Old 03-18-2009, 06:18 AM   #2
bitpicker
Member
 
Registered: Jul 2003
Location: Germany
Distribution: Xubuntu, Ubuntu
Posts: 416
Blog Entries: 14

Rep: Reputation: 35
So it is the Debian grub you're running, and it does list Ubuntu? Then you probably only have to look where exactly your Ubuntu resides and edit /boot/menu.lst on the Debian partition to reflect that. There's probably some error in the menu entry. If in doubt, post the content of your menu.lst file and the content of the menu.lst file which belongs to Ubuntu, as well as the content of mtab when the Ubuntu partition is mounted, that may make it easier to diagnose.

Robin
 
Old 03-18-2009, 06:46 AM   #3
Pedroski
Senior Member
 
Registered: Jan 2002
Location: Nanjing, China
Distribution: Ubuntu 18.04
Posts: 1,687

Original Poster
Rep: Reputation: 55
Here is menu.1st from Debian on /dev/sda6
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda6 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,5)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(single-user mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

title Debian GNU/Linux, kernel 2.6.24-etchnhalf.1-686
root (hd0,5)
kernel /boot/vmlinuz-2.6.24-etchnhalf.1-686 root=/dev/sda6 ro quiet
initrd /boot/initrd.img-2.6.24-etchnhalf.1-686
savedefault

title Debian GNU/Linux, kernel 2.6.24-etchnhalf.1-686 (single-user mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.24-etchnhalf.1-686 root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.24-etchnhalf.1-686
savedefault

title Debian GNU/Linux, kernel 2.6.18-6-686
root (hd0,5)
kernel /boot/vmlinuz-2.6.18-6-686 root=/dev/sda6 ro quiet
initrd /boot/initrd.img-2.6.18-6-686
savedefault

title Debian GNU/Linux, kernel 2.6.18-6-686 (single-user mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.18-6-686 root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.18-6-686
savedefault

title Debian GNU/Linux, kernel 2.6.18-6-486
root (hd0,5)
kernel /boot/vmlinuz-2.6.18-6-486 root=/dev/sda6 ro quiet
initrd /boot/initrd.img-2.6.18-6-486
savedefault

title Debian GNU/Linux, kernel 2.6.18-6-486 (single-user mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.18-6-486 root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.18-6-486
savedefault

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader)
root (hd0,1)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda8.
title Ubuntu 8.10, kernel 2.6.27-11-generic (on /dev/sda8)
root (hd0,7)
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda8.
title Ubuntu 8.10, kernel 2.6.27-11-generic (recovery mode) (on /dev/sda8)
root (hd0,7)
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro single
initrd /boot/initrd.img-2.6.27-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda8.
title Ubuntu 8.10, kernel 2.6.27-7-generic (on /dev/sda8)
root (hd0,7)
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda8.
title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode) (on /dev/sda8)
root (hd0,7)
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro single
initrd /boot/initrd.img-2.6.27-7-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda8.
title Ubuntu 8.10, kernel 2.6.27-3-rt (on /dev/sda8)
root (hd0,7)
kernel /boot/vmlinuz-2.6.27-3-rt root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro quiet splash
initrd /boot/initrd.img-2.6.27-3-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda8.
title Ubuntu 8.10, kernel 2.6.27-3-rt (recovery mode) (on /dev/sda8)
root (hd0,7)
kernel /boot/vmlinuz-2.6.27-3-rt root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro single
initrd /boot/initrd.img-2.6.27-3-rt
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda8.
title Ubuntu 8.10, memtest86+ (on /dev/sda8)
root (hd0,7)
kernel /boot/memtest86+.bin
savedefault
boot
 
Old 03-18-2009, 06:51 AM   #4
Pedroski
Senior Member
 
Registered: Jan 2002
Location: Nanjing, China
Distribution: Ubuntu 18.04
Posts: 1,687

Original Poster
Rep: Reputation: 55
Here is the Ubuntu menu.1st in /boot/grub

# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.10, kernel 2.6.27-11-generic
uuid 5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet

title Ubuntu 8.10, kernel 2.6.27-11-generic (recovery mode)
uuid 5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro single
initrd /boot/initrd.img-2.6.27-11-generic

title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid 5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid 5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Ubuntu 8.10, kernel 2.6.27-3-rt
uuid 5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e
kernel /boot/vmlinuz-2.6.27-3-rt root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro quiet splash
initrd /boot/initrd.img-2.6.27-3-rt
quiet

title Ubuntu 8.10, kernel 2.6.27-3-rt (recovery mode)
uuid 5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e
kernel /boot/vmlinuz-2.6.27-3-rt root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro single
initrd /boot/initrd.img-2.6.27-3-rt

title Ubuntu 8.10, memtest86+
uuid 5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader) careful, messes everything up!!!!
root (hd0,0)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista/Longhorn (loader) use this one!!
root (hd0,1)
savedefault
makeactive
chainloader +1


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda6.
title Debian GNU/Linux, kernel 2.6.24-etchnhalf.1-686 (on /dev/sda6)
root (hd0,5)
kernel /boot/vmlinuz-2.6.24-etchnhalf.1-686 root=/dev/sda6 ro quiet acpi=off
initrd /boot/initrd.img-2.6.24-etchnhalf.1-686
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda6.
title Debian GNU/Linux, kernel 2.6.24-etchnhalf.1-686 (single-user mode) (on /dev/sda6) acpi=off
root (hd0,5)
kernel /boot/vmlinuz-2.6.24-etchnhalf.1-686 root=/dev/sda6 ro single
initrd /boot/initrd.img-2.6.24-etchnhalf.1-686
savedefault
boot
 
Old 03-18-2009, 06:53 AM   #5
Pedroski
Senior Member
 
Registered: Jan 2002
Location: Nanjing, China
Distribution: Ubuntu 18.04
Posts: 1,687

Original Poster
Rep: Reputation: 55
Here is mtab with /dev/sda8 mounted

/dev/sda6 / ext3 rw,errors=remount-ro 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid,mode=0755 0 0
proc /proc proc rw,noexec,nosuid,nodev 0 0
sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0
procbususb /proc/bus/usb usbfs rw 0 0
udev /dev tmpfs rw,mode=0755 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=620 0 0
/dev/sdb1 /media/KINGSTON vfat rw,noexec,nosuid,nodev,quiet,shortname=mixed,uid=1000,gid=1000,umask=077,iocharset=utf8 0 0
/dev/scd0 /media/cdrom0 iso9660 ro,noexec,nosuid,nodev 0 0
/dev/sda8 /mnt ext3 rw 0 0
 
Old 03-18-2009, 06:56 AM   #6
bitpicker
Member
 
Registered: Jul 2003
Location: Germany
Distribution: Xubuntu, Ubuntu
Posts: 416
Blog Entries: 14

Rep: Reputation: 35
The following is the topmost Ubuntu entry:

Code:
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda8.
title Ubuntu 8.10, kernel 2.6.27-11-generic (on /dev/sda8)
root (hd0,7)
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
savedefault
boot
It looks ok, but in contrast to the Debian ones it does not give the normal path to root; I'd replace

root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e

with

Code:
root=/dev/sda8
and check whether that helps. I'm also not sure the boot command is really needed.

Robin
 
Old 03-18-2009, 06:59 AM   #7
bitpicker
Member
 
Registered: Jul 2003
Location: Germany
Distribution: Xubuntu, Ubuntu
Posts: 416
Blog Entries: 14

Rep: Reputation: 35
The following is the topmost entry for Ubuntu:
Code:
# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda8.
title Ubuntu 8.10, kernel 2.6.27-11-generic (on /dev/sda8)
root (hd0,7)
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
savedefault
boot
I'd replace
Code:
root=UUID=5ca3c3bb-15c6-4db1-846f-ea3a9e58d30e
with
Code:
root=/dev/sda8
for starters, and see whether that works better.

Robin
 
Old 03-18-2009, 07:00 AM   #8
bitpicker
Member
 
Registered: Jul 2003
Location: Germany
Distribution: Xubuntu, Ubuntu
Posts: 416
Blog Entries: 14

Rep: Reputation: 35
Strange, I had the impression the first answer had been lost in cyberspace, so I wrote a second one. Sorry for the double post.
 
Old 03-18-2009, 11:26 AM   #9
maybeway36
LQ Newbie
 
Registered: Mar 2009
Posts: 7

Rep: Reputation: 2
You could also try chaning:
Code:
/boot/vmlinuz-2.6.27-11-generic --> /vmlinuz
/boot/initrd.img-2.6.27-11-generic --> /initrd.img
I don't know if that will help, but it's a start.
 
Old 03-19-2009, 03:40 AM   #10
Pedroski
Senior Member
 
Registered: Jan 2002
Location: Nanjing, China
Distribution: Ubuntu 18.04
Posts: 1,687

Original Poster
Rep: Reputation: 55
Well, that didn't work! Any more tips??
 
Old 03-19-2009, 07:07 AM   #11
ajlewis2
Member
 
Registered: Nov 2003
Distribution: Ubuntu
Posts: 217

Rep: Reputation: 46
What was it that didn't work? I think bitpicker's advice to change the kernel line was a better idea. Changing the name of the kernel like maybeway36 suggested did not look like a good idea.

If that doesn't work. you might try booting into Ubuntu using the grub command line. See http://linuxbasics.org/tutorials/adv...b_command_line for the directions. If you can boot into Ubuntu with this, then you can use 'update-grub' to make a new menu.lst for Ubuntu to include the Debian system and then 'grub-install /dev/sda' to reinstall grub on the MBR from the Ubuntu distro.
 
Old 03-19-2009, 07:11 AM   #12
Pedroski
Senior Member
 
Registered: Jan 2002
Location: Nanjing, China
Distribution: Ubuntu 18.04
Posts: 1,687

Original Poster
Rep: Reputation: 55
Putting root=/dev/sda8 didn't work.
Nor did chaining.
 
Old 03-19-2009, 07:17 AM   #13
ajlewis2
Member
 
Registered: Nov 2003
Distribution: Ubuntu
Posts: 217

Rep: Reputation: 46
Chaining would only work if you had installed grub on the root partition of Ubuntu. I'm pretty sure that you installed grub in the MBR when you installed Ubuntu, right?
 
Old 03-19-2009, 08:12 AM   #14
Pedroski
Senior Member
 
Registered: Jan 2002
Location: Nanjing, China
Distribution: Ubuntu 18.04
Posts: 1,687

Original Poster
Rep: Reputation: 55
So: did the grub command line thingy

it only finds (hd0,5) which translates as /dev/sda6. So that is why Ubuntu can't start.

How do I get (hd0,7) in there?

Grub find command does not find (hd0,5)/vml, nor find (hd0,5)/boot/vml, nor /boot/init nor /etc/fstab

But anyway, Debian boots!

If I try find (hd0,7)/vml in grub, it just says file not found.
Looks like I'm going to have to re-install Ubuntu!(And hopefully not lose Debian)
 
Old 03-19-2009, 08:15 AM   #15
Pedroski
Senior Member
 
Registered: Jan 2002
Location: Nanjing, China
Distribution: Ubuntu 18.04
Posts: 1,687

Original Poster
Rep: Reputation: 55
I just say yes to the Debian installer, which does the work, but yes, I think it installs in MBR, because it says it is unusual to install it in a non-primary partition, and can cause trouble.
Trouble I have!!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
I lost my Ubuntu user name and/or password dieterschmied Linux - Newbie 3 10-11-2012 07:29 PM
Grub problem, lost Ubuntu Pedroski Ubuntu 7 03-19-2009 02:18 PM
LXer: How Ubuntu Lost Its Credibility LXer Syndicated Linux News 0 11-13-2008 10:00 AM
Firestarter for Ubuntu 7.04 is lost SidewalkCynic Linux - Newbie 16 03-27-2008 11:16 AM
Cant start X - seems to have lost fonts. Ubuntu 5.10. Peet_Nel Linux - Software 1 02-13-2006 05:38 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian

All times are GMT -5. The time now is 11:27 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration