-   Debian (
-   -   Getting lirc modules working (

kzar 01-25-2005 04:58 PM

Getting lirc modules working
Hi guys, I could use some help getting the lirc modules working, but I'm having some problems.

I have installed the lirc-modules-source package and compiled the package on my faster computer and then copied the package over to install it. Everything seems to work fine but "modprobe lirc_serial" still returns module not found. Even though /lib/modules/2.6.10/misc/ has the lirc modules in it. (lirc_serial.o etc)

Next I tried installing all the tools for compiling and the kernel source on the pc with the reciever, installed the lib-modules-source thing, installed it again, still same problem.

Now I am trying it a different way by going to /usr/src/kernel-source-2.6.10/ and doing "debian/rules binary-modules" but its saying some errors about the configuration of lirc-modules-source being poor and to try setting it up manualy rather than using the automagical option.

So heres my problem now, I need to figure out things like I/O port and IRQ for my serial infra red reciever thingy and I don't know how. The people in #debian sugested looking at /proc/interrupts, /proc/ioports which of course I did but I don't understand it :o . Heres what they contain:


pvr:/usr/src# cat /proc/interrupts
0: 5437307 XT-PIC timer
2: 0 XT-PIC cascade
8: 4 XT-PIC rtc
9: 0 XT-PIC acpi
10: 3 XT-PIC saa7146 (0)
11: 139154 XT-PIC eth0
14: 1329536 XT-PIC ide0
15: 19 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0

pvr:/usr/src# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
4000-400f : 0000:00:00.1
5000-5003 : PM1a_EVT_BLK
5004-5005 : PM1a_CNT_BLK
5008-500b : PM_TMR
5014-5017 : GPE0_BLK
d000-dfff : PCI Bus #01
d000-d07f : 0000:01:00.0
e000-e07f : 0000:00:09.0
e000-e07f : 0000:00:09.0
e400-e4ff : 0000:00:0c.0
Well I hope you guys can help because this is starting to wind me up :mad: because I can't think of any more ideas of what to try!

Thanks, Kzar

All times are GMT -5. The time now is 03:58 AM.