LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian
User Name
Password
Debian This forum is for the discussion of Debian Linux.

Notices


Reply
  Search this Thread
Old 01-27-2005, 01:36 PM   #1
Haraldsh
LQ Newbie
 
Registered: Sep 2003
Distribution: Debian 2.6.9 Sarge
Posts: 24

Rep: Reputation: 15
ATI driver to FIREGL T2


Hi.


I'm trying to install the driver on Debian Sarge, on a Thinkpad T41p (2366-GEG
if you were wondering).
I've been sitting here for a while trying to setup the 3D driver for the FIREGL T2 by using the information from ATI Linux driver and Debian GNU/Linux on IBM T41P.
I made the driver work for a little while, until I restarted the machine to see if it really worked.
Alas the succsess seems like a mirage at this point.

Now that I try a "modprobe fglrx" I get "FATAL: Error inserting fglrx (/lib/modules/2.6.9/misc/fglrx.ko): Unknown symbol in module, or unknown parameter (see dmesg)"
Which might be the result of something in the kernel... (I'm not that good in compiling a kernel ).

Data from dsmes:
" (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000086
ACPI: PCI interrupt 0000:02:00.1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000086
paride: aten registered as protocol 0
paride: bpck registered as protocol 1
paride: comm registered as protocol 2
paride: dstr registered as protocol 3
paride: k951 registered as protocol 4
paride: epat registered as protocol 5
paride: epia registered as protocol 6
paride: frpw registered as protocol 7
paride: friq registered as protocol 8
paride: fit2 registered as protocol 9
paride: fit3 registered as protocol 10
paride: on20 registered as protocol 11
paride: on26 registered as protocol 12
paride: ktti registered as protocol 13
bpck6: BACKPACK Protocol Driver V2.0.2
bpck6: Copyright 2001 by Micro Solutions, Inc., DeKalb IL. USA
paride: bpck6 registered as protocol 14
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
pt: pt version 1.04, major 96
pt0: Autoprobe failed
pt: No ATAPI tape drive detected
pg: pg version 1.02, major 97
pga: Autoprobe failed
pg: No ATAPI device detected
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
ehci_hcd 0000:00:1d.7: capability 0001 at 68
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem f8838000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
ehci_hcd 0000:00:1d.7: supports USB remote wakeup
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: default language 0x0409
usb usb1: Product: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
usb usb1: Manufacturer: Linux 2.6.9 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: ganged power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
-> pass-through port
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
serio: Synaptics pass-through port at isa0060/serio1/input0
input: PS/2 Generic Mouse on synaptics-pt/serio0
input: PC Speaker
I2O Core - (C) Copyright 1999 Red Hat Software
i2o: max_drivers=4
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
(c) Copyright 1999-2001 Red Hat Software.
I2O SCSI Peripheral OSM
i2o: too many drivers registered, increase max_drivers
Intel 810 + AC97 Audio, version 1.01, 12:39:11 Jan 13 2005
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and 0xc0000800, IRQ 11
i810: Intel ICH4 mmio at 0xf883ac00 and 0xf883c800
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: ADS116 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
unable to register OSS PCM device 0:0
unable to register OSS mixer device 0:0
joystick(s) found
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
usbcore: registered new driver snd-usb-audio
ALSA device list:
#0: Dummy 1
#1: Virtual MIDI Card 1
#2: Intel 82801DB-ICH4 Modem at 0x2400, irq 11
pktgen.c: v1.4: Packet Generator for packet performance testing.
NET: Registered protocol family 26
GACT probability on
divert: not allocating divert_blk for non-ethernet device teql0
u32 classifier
Perfomance counters on
input device check on
Actions configured
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
IPv4 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device tunl0
GRE over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device gre0
ip_conntrack version 2.1 (8187 buckets, 65496 max) - 332 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
ip6_tables: (C) 2000-2002 Netfilter core team
registering ipv6 mark target
divert: not allocating dvert_blk for non-ethernet device ip6tnl0
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
NET: Registered protocol family 4
NET: Registered protocol family 5
NET: Registered protocol family 9
X.25 for Linux. Version 0.2 for Linux 2.1.15
NET: Registered protocol family 8
NET: Registered protocol family 20
lec.c: Jan 13 2005 12:39:51 initialized
mpoa: /proc/mpoa initialized
mpc.c: Jan 13 2005 12:39:48 initialized
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
NET: Registered protocol family 12
NET: Registered protocol family 19
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
SCTP: Hash tables configured (established 65536 bind 65536)
sctp_init_sock(sk: c1b79ac0)
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
LID SLPB PCI0 UART PCI1 USB0 USB1 USB2 AC9M
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
RAMDISK: Couldn't find valid RAM disk image starting at 0.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 288k freed
kjournald starting. Commit interval 5 seconds
Adding 2097100k swap on /dev/hda7. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
cdrom: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
ide_core: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
ide_cd: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
nvram: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
e1000: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.12.14 (AR5210, AR5211, AR5212)
wlan: 0.8.4.4 (EXPERIMENTAL)
ath_rate_onoe: 1.0
ath_pci: 0.9.4.11 (EXPERIMENTAL)
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11
divert: allocating divert_blk for ath0
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3
ath0: 802.11 address: 00:05:4e:4c:74:26
ath0: Use hw queue 0 for WME_AC_BE traffic
ath0: Use hw queue 1 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Atheros 5212: mem=0xc0210000, irq=11
ide_core: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
piix: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
usbcore: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
ehci_hcd: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
evdev: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
evdev: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
joydev: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
evdev: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
evdev: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
agpgart: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
intel_agp: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
usbcore: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
ehci_hcd: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
hw_random: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
ide_core: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
piix: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
e1000: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
usbcore: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
Disabled Privacy Extensions on device c0774c40(lo)
NET: Registered protocol family 17
battery: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
ac: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
processor: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
button: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
fan: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
processor: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
thermal: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
apm: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
apm: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
apm: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
fglrx: Unknown symbol module_refcount
eth0: no IPv6 routers present
fglrx: Unknown symbol module_refcount
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7 hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425 vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003cffa1
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7 hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425 vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003cffa1
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7 hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425 vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003cffa1
apm: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
fglrx: Unknown symbol module_refcount
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7 hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425 vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003cffa1
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7 hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425 vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003cffa1
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7 hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425 vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003cffa1
apm: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
fglrx: Unknown symbol module_refcount
fglrx: Unknown symbol module_refcount
fglrx: Unknown symbol module_refcount
fglrx: Unknown symbol module_refcount
fglrx: Unknown symbol module_refcount
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7 hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425 vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003cffa1
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7 hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425 vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003cffa1
hStart = 1472, hEnd = 1512, hTotal = 1600
vStart = 1052, vEnd = 1053, vTotal = 1062
h_total_disp = 0xae00c7 hsync_strt_wid = 0x505ba
v_total_disp = 0x4190425 vsync_strt_wid = 0x1041b
pixclock = 11770
freq = 8496
lvds_gen_cntl: 003cffa1
apm: version magic '2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'
fglrx: Unknown symbol module_refcount
fglrx: Unknown symbol module_refcount
fglrx: Unknown symbol module_refcount
fglrx: Unknown symbol module_refcount
fglrx: Unknown symbol module_refcount"

I've a lot of "'2.6.9 preempt PENTIUMM gcc-3.3' should be '2.6.9 preempt PENTIUMM REGPARM gcc-3.3'" which I can't rid of (I'm annoyed by that), any tip on how to get rid of them is greatly appriciated.

Hope someone can help with some insight in this matter.
 
Old 01-27-2005, 01:38 PM   #2
Haraldsh
LQ Newbie
 
Registered: Sep 2003
Distribution: Debian 2.6.9 Sarge
Posts: 24

Original Poster
Rep: Reputation: 15
Oh yeah.. this is the XF86Conf-4 I'm currently using:

# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86

Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "synaptics"

Subsection "extmod"
Option "omit xfree86-dga"
EndSubSection
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "no"
Option "XkbVariant" "no"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "ATI"
# Driver "ati"
# Driver "radeon"
Driver "fglrx" #ATI OFFICIAL Driver"

#If X refuses to use the screen resolution you've asked for,
#uncomment this;
#Option "NoDDC"

# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"

# === OpenGL Overlay ===
# Note: When OpenGl Overlay is enables, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"

# === Use internal AGP GART support? ===
# If OpenGl acceleration doesn't work, try using "yes" here
# and disable the kernel agpgart driver
Option "UseInternalAGPGART" "no"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28-50
VertRefresh 43-75
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
Subsection "Display"
Depth 16
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050"
EndSubSection

EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
ATI FireGL X1 drivers for AMD64 ??? gattumarrudu Linux - Hardware 4 08-26-2004 08:09 AM
installing ATI firegl (fglrx) Blink1982 Linux - Hardware 0 06-08-2004 04:43 PM
Which FireGL for ATI Radeon 9600 Pro velska Linux - Hardware 2 09-26-2003 09:58 AM
ATI 9700pro, Mandrake 9.1, FireGL 4.3 drivers - help! pablo0713 Linux - Hardware 1 06-23-2003 01:15 PM
ATI fireGL drivers messing with my Consoles peter72 Linux - Hardware 0 01-29-2003 07:07 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian

All times are GMT -5. The time now is 03:56 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration