Squid3.5
Posted 11-26-2019 at 06:23 PM by ted_chou12
Code:
sudo apt-get install build-essential sharutils ccze libzip-dev libssl-dev sudo apt-get install devscripts build-essential fakeroot sudo apt-get install libssl-dev libcrypto++-dev libssl1.0-dev sudo apt source squid3 cd squid3-3.5.xxx vi debian/rules # add the lines # --enable-ssl \ # --enable-ssl-crtd \ ./configure fakeroot debian/rules binary make make install
Total Comments 3
Comments
-
squid.conf
Code:acl CONNECT method CONNECT http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow all #dns_v4_first on #http_access allow purge localhost #http_access deny purge # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # always_direct allow all #ssl_bump client-first all sslproxy_cert_error allow all sslproxy_flags DONT_VERIFY_PEER sslcrtd_program /usr/local/squid/libexec/ssl_crtd -s /usr/local/squid/var/lib/ssl_db -M 4MB sslcrtd_children 8 startup=1 idle=1 #sslproxy_cipher HIGH:MEDIUM:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS acl step1 at_step SslBump1 ssl_bump peek step1 ssl_bump bump all #ssl_bump bump monitoredSites !serverIsBank #ssl_bump terminate blocked_https #ssl_bump splice all #http_access allow localnet #http_access allow localhost request_header_add X-GoogApps-Allowed-Domains "hennge.com" all #request_header_add Test "Value" all coredump_dir /var/spool/squid
Posted 11-26-2019 at 06:25 PM by ted_chou12 -
Squid Windows
Code:# # Recommended minimum configuration: # # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 10.0.0.0/8 # RFC1918 possible internal network acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.0.0/16 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow localhost manager http_access deny manager # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost always_direct allow all ssl_bump server-first all sslproxy_cert_error deny all sslproxy_flags DONT_VERIFY_PEER sslcrtd_program /lib/squid/ssl_crtd -s /usr/share/squid/ssl_db -M 4MB sslcrtd_children 8 startup=1 idle=1 acl step1 at_step SslBump1 ssl_bump peek step1 ssl_bump bump all # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 3128 http_port 3129 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB key=/etc/squid/ssl_cert/google.com.private cert=/etc/squid/ssl_cert/google.com.cert # Uncomment the line below to enable disk caching - path format is /cygdrive/<full path to cache folder>, i.e. #cache_dir aufs /cygdrive/d/squid/cache 3000 16 256 # Leave coredumps in the first cache dir coredump_dir /var/cache/squid # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 request_header_add X-GoogApps-Allowed-Domains "hennge.com" all dns_nameservers 8.8.8.8 208.67.222.222 max_filedescriptors 3200
Posted 11-27-2019 at 08:17 AM by ted_chou12 -
Squid Windows
Quote:2019/11/27 23:20:28 kid1| WARNING: no_suid: setuid(0): (22) Invalid argument
(ssl_crtd): Uninitialized SSL certificate database directory: /usr/share/squid/ssl_db. To initialize, run "ssl_crtd -c -s /usr/share/squid/ssl_db".Code:C:\Squid\lib\squid\ssl_crtd -c -s C:\Squid\usr\share\squid\ssl_db
Posted 11-27-2019 at 08:22 AM by ted_chou12
Updated 11-28-2019 at 10:08 AM by ted_chou12