QT 5 problem
mv -f libQt5DBus.so.5.5 ../../lib/
make[3]: Leaving directory '/var/cache/alps/sources/qt-everywhere-opensource-src-5.5.1/qtbase/src/dbus' make[2]: Leaving directory '/var/cache/alps/sources/qt-everywhere-opensource-src-5.5.1/qtbase/src' make[1]: *** [sub-src-make_first] Error 2 Makefile:45: recipe for target 'sub-src-make_first' failed make[1]: Leaving directory '/var/cache/alps/sources/qt-everywhere-opensource-src-5.5.1/qtbase' make: *** [module-qtbase-make_first] Error 2 Makefile:71: recipe for target 'module-qtbase-make_first' failed Error occured in execution of /var/cache/alps/scripts/qt5.sh |
Hi RAS-OS,
Please give me some time. I would try building QT5 and see if I can reproduce this error. I would get back with a solution in case I get a failure. |
The problem was librssl
|
There seems to be some bug in qt5 installation. After removing libressl it install normally but start command were wrong it were only /bin/designer instead of /opt/qt5/bin/designer so the program won't start.
Also I have installed qemu but without GUI it does not wort a lot so I tried to install aqemu but it gives me CMake Warning at CMakeLists.txt:183 (FIND_PACKAGE): By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5Core", but CMake did not find one. Could not find a package configuration file provided by "Qt5Core" with any of the following names: Qt5CoreConfig.cmake qt5core-config.cmake Add the installation prefix of "Qt5Core" to CMAKE_PREFIX_PATH or set "Qt5Core_DIR" to a directory containing one of the above files. If "Qt5Core" provides a separate development package or SDK, be sure it has been installed. CMake Warning at CMakeLists.txt:184 (FIND_PACKAGE): By not providing "FindQt5Widgets.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5Widgets", but CMake did not find one. Could not find a package configuration file provided by "Qt5Widgets" with any of the following names: Qt5WidgetsConfig.cmake qt5widgets-config.cmake Add the installation prefix of "Qt5Widgets" to CMAKE_PREFIX_PATH or set "Qt5Widgets_DIR" to a directory containing one of the above files. If "Qt5Widgets" provides a separate development package or SDK, be sure it has been installed. CMake Warning at CMakeLists.txt:185 (FIND_PACKAGE): By not providing "FindQt5Network.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5Network", but CMake did not find one. Could not find a package configuration file provided by "Qt5Network" with any of the following names: Qt5NetworkConfig.cmake qt5network-config.cmake Add the installation prefix of "Qt5Network" to CMAKE_PREFIX_PATH or set "Qt5Network_DIR" to a directory containing one of the above files. If "Qt5Network" provides a separate development package or SDK, be sure it has been installed. CMake Warning at CMakeLists.txt:186 (FIND_PACKAGE): By not providing "FindQt5Test.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5Test", but CMake did not find one. Could not find a package configuration file provided by "Qt5Test" with any of the following names: Qt5TestConfig.cmake qt5test-config.cmake Add the installation prefix of "Qt5Test" to CMAKE_PREFIX_PATH or set "Qt5Test_DIR" to a directory containing one of the above files. If "Qt5Test" provides a separate development package or SDK, be sure it has been installed. CMake Warning at CMakeLists.txt:187 (FIND_PACKAGE): By not providing "FindQt5PrintSupport.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5PrintSupport", but CMake did not find one. Could not find a package configuration file provided by "Qt5PrintSupport" with any of the following names: Qt5PrintSupportConfig.cmake qt5printsupport-config.cmake Add the installation prefix of "Qt5PrintSupport" to CMAKE_PREFIX_PATH or set "Qt5PrintSupport_DIR" to a directory containing one of the above files. If "Qt5PrintSupport" provides a separate development package or SDK, be sure it has been installed. -- Configuring done CMake Error at CMakeLists.txt:216 (ADD_EXECUTABLE): Target "aqemu" links to target "Qt5::Widgets" but the target was not found. Perhaps a find_package() call is missing for an IMPORTED target, or an ALIAS target is missing? CMake Error at CMakeLists.txt:216 (ADD_EXECUTABLE): Target "aqemu" links to target "Qt5::Network" but the target was not found. Perhaps a find_package() call is missing for an IMPORTED target, or an ALIAS target is missing? CMake Error at CMakeLists.txt:216 (ADD_EXECUTABLE): Target "aqemu" links to target "Qt5::Test" but the target was not found. Perhaps a find_package() call is missing for an IMPORTED target, or an ALIAS target is missing? CMake Error at CMakeLists.txt:216 (ADD_EXECUTABLE): Target "aqemu" links to target "Qt5::PrintSupport" but the target was not found. Perhaps a find_package() call is missing for an IMPORTED target, or an ALIAS target is missing? -- Generating done -- are these libraries included and if not should I install the latest qt5 from the website? Also I installed Virtual Machine Manager virt-manager-1.4.0 but it won't start the app from menu and in terminal it gives me [ ~ ]$ virt-manager Traceback (most recent call last): File "/usr/share/virt-manager/virt-manager", line 30, in <module> gi.require_version('LibvirtGLib', '1.0') File "/usr/lib/python2.7/site-packages/gi/__init__.py", line 102, in require_version raise ValueError('Namespace %s not available' % namespace) ValueError: Namespace LibvirtGLib not available I have installed libvirt 1.3.0 and have previously 1.1.0 but still it wont work how to uninstall it |
Last time I tried installing qt5, it failed so I had to restart the build. Since it takes a lot of time, so I could not actually come to a conclusion as to what could be the problem. As of now a second build is in progress. I would soon let you know. Are you installing qt5 for qemu or is it for anything else. In case its for qemu, I would try installing qemu and dependencies and include the build scripts for them. As far as libvirt is concerned the logs tell that virt-manager is not able to find LibvirtGLib. These are the dependencies of virt-manager:
python >= 2.7 gtk3 >= 3.14 libvirt-python >= 0.6.0 pygobject3 >= 3.14 libosinfo >= 0.2.10 Have you installed them all? Especially libvirt-python? Would try making build-scripts for the same as well. As far as uninstalling them is concerned, you can run the following command from within the extracted tarball extracted dir. That should do the uninstallation. I am not sure of this though because I have never installed it myself. You may try this or you may wait till I am done with QT5 post which I can try figuring out virt-manager and get back to you with a solution |
I have installed qt5 in order to install GUI for qemu Aqemu or qtqemu while virtual manager does not need qt5 it wont start even though it has installed. I have installed libvirt-python 1.30 and libvirtglib 0.2.3
|
Hi RAS-OS,
Indeed Qt5 fails. I tried twice and met the same fate. I understood you installed QT5 for installing Aquemu. I have not tried virtual manager because I was still busy with qt5. I would fix them and let you know. As said earlier, I would also build scripts for virtual-manager and Aqemu/qtqemu. Would keep you posted of the progress. |
Ok you should make another check. I tried to install mate indicator as I could get mail indicators.
indicator-image-helper.c: In function 'refresh_image': indicator-image-helper.c:72:3: error: 'gtk_icon_info_free' is deprecated: Use 'g_object_unref' instead [-Werror=deprecated-declarations] gtk_icon_info_free(icon_info); ^ In file included from /usr/local/include/gtk-3.0/gtk/gtk.h:122:0, from indicator-image-helper.h:27, from indicator-image-helper.c:25: /usr/local/include/gtk-3.0/gtk/gtkicontheme.h:284:23: note: declared here void gtk_icon_info_free (GtkIconInfo *icon_info ^ cc1: all warnings being treated as errors Makefile:622: recipe for target 'libindicator3_la-indicator-image-helper.lo' failed |
Hi RAS-OS,
I went ahead and fixed a lot of scripts and added new ones. You can run sudo alps updatescripts to get the latest scripts. Fixed the qemu script because that was broken and was failing and also added scripts and dependency scripts for virt-manager. You can install qemu and virt-manager by doing: alps install qemu alps install virt-manager That would install qemu and virt-manager as well. I could run virt-manager but could not test it due to lack of time. Hope you can test it and in case it works please mark the thread as solved. In case you get issues please do let me know. I am fixing QT5 as well and would update the same soon. |
looking into the libindicator failure as well. would keep posted
|
Fixed the libindicator and mate-indicator-applet scripts.
|
Just found another problem with qemu. Qemu script created files inside /etc/X11/xorg.conf.d which prevented the system from starting to a graphical desktop. So I had to remove the files inside /etc/X11/xorg.conf.d:
sudo rm /etc/X11/xorg.conf.d Please do this before you reboot else you might have to do this through vt which would be cumbersome. |
This is what I got :
running build_ext building 'libvirtmod' extension gcc -pthread -fno-strict-aliasing -g -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC -I. -I/usr/include/python2.7 -c libvirt-override.c -o build/temp.linux-x86_64-2.7/libvirt-override.o In file included from libvirt-override.c:25:0: libvirt-override.c: In function ‘libvirt_virConnectDomainEventRegisterAny’: build/libvirt.h:266:49: error: ‘VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION’ undeclared (first use in this function) #define VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION VIR_DOMAIN_EVENT_ID_MIGRATION_I ^ libvirt-override.c:7053:10: note: in expansion of macro ‘VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION’ case VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION: ^ build/libvirt.h:266:49: note: each undeclared identifier is reported only once for each function it appears in #define VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION VIR_DOMAIN_EVENT_ID_MIGRATION_I ^ libvirt-override.c:7053:10: note: in expansion of macro ‘VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION’ case VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION: ^ build/libvirt.h:263:43: error: ‘VIR_DOMAIN_EVENT_ID_JOB_COMPLETED’ undeclared (first use in this function) #define VIR_DOMAIN_EVENT_ID_JOB_COMPLETED VIR_DOMAIN_EVENT_ID_JOB_COMPLETED ^ libvirt-override.c:7058:10: note: in expansion of macro ‘VIR_DOMAIN_EVENT_ID_JOB_COMPLETED’ case VIR_DOMAIN_EVENT_ID_JOB_COMPLETED: ^ build/libvirt.h:257:51: error: ‘VIR_DOMAIN_EVENT_ID_DEVICE_REMOVAL_FAILED’ undeclared (first use in this function) #define VIR_DOMAIN_EVENT_ID_DEVICE_REMOVAL_FAILED VIR_DOMAIN_EVENT_ID_DEVICE_RE ^ libvirt-override.c:7063:10: note: in expansion of macro ‘VIR_DOMAIN_EVENT_ID_DEVICE_REMOVAL_FAILED’ case VIR_DOMAIN_EVENT_ID_DEVICE_REMOVAL_FAILED: ^ error: command 'gcc' failed with exit status 1 Error occured in execution of /var/cache/alps/scripts/libvirt-python.sh Aborting Aslo there is problem with a alps clean command Invalid command clean Usage : alps <command> [packages...] Where <command> can be one of the following: install install packages if not installed reinstall force installation of an already installed package updatescripts update the package build scripts selfupdate update alps to latest version online clean clean up the working directory src <url> download tarball from specified help print this message Examples: alps install vlc # This would build/install vlc alps clean # This would clean the build directory |
Can you please remove the directories manually:
sudo rm -r /var/cache/alps/sources/libvirt* sudo rm -r /var/cache/alps/sources/virt* And then retry |
As far as the alps clean command is concerned, I would take a look into it.
|
All times are GMT -5. The time now is 05:20 PM. |