LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Other *NIX Forums > *BSD
Reload this Page Dell Latitude D520 - hardware configuration problem
User Name
Password
*BSD This forum is for the discussion of all BSD variants.
FreeBSD, OpenBSD, NetBSD, etc.

Notices


Reply
  Search this Thread
Old 07-11-2006, 10:11 PM   #1
janskey
LQ Newbie
 
Registered: Apr 2006
Posts: 6

Rep: Reputation: 0
Dell Latitude D520 - hardware configuration problem

hi guys,

just need help on enabling my hardwares on Dell Latitude D520: i945GM Chipset
* video driver [its intel 945GM w/ 1400x1050] and how to do work on vesa
* ACPI
* ICH7 Family thing!
* IEEE 1394 bus [i think this is the firewire]
* infrared
* Modem [conexant hda d110]
* wireless - intel pro/wireless 3945abg
* pcmcia adapters
* communication ports [com1]
* SMP - its a Dual Core Intel Centrino Duo
* sounds - sigmatel high definition
* usb
* and other devices that i didnt recognize

this are the outputs of dmesg, pciconf and lspci respectively.

Code:
$ dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:42:56 UTC 2006
    root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU           T2400  @ 1.83GHz (1828.76-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>>
  AMD Features=0x100000<NX>
  Cores per package: 2
real memory  = 1064120320 (1014 MB)
avail memory = 1032196096 (984 MB)
ACPI APIC Table: <DELL   M07    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL M07    > on motherboard
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib2
pci12: <network> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xbf80-0xbf9f irq 20 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xbf60-0xbf7f irq 21 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbf40-0xbf5f irq 22 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xbf20-0xbf3f irq 23 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80000-0xffa803ff irq  20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5: vendor 0x413c product 0xa005, class 9/0, rev 2.00/50.18, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 0 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib3
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdfcfe000-0xdfcfffff irq 17 at de vice 0.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:15:c5:08:35:29
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xdfcfd000-0xdfcfdfff,0xdfcfc 800-0xdfcfcfff irq 19 at device 1.4 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 34:4f:c0:00:3c:ad:f9:21
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 36:4f:c0:ad:f9:21
fwe0: Ethernet address: 36:4f:c0:ad:f9:21
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa 0-0xbfaf irq 17 at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1 port 0x3e8-0x3ef,0x290-0x297 drq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcffff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
ad0: 76319MB <Hitachi HTS541080G9SA00 MB4OC60G> at ata0-master UDMA33
acd0: CDRW <PHILIPS CD-RW/DVD-ROM SCB5265/TD17> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s2a
bfe0: link state changed to UP
Code:
$ pciconf -lv
hostb0@pci0:0:0:        class=0x060000 card=0x01d41028 chip=0x27a08086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    class    = bridge
    subclass = HOST-PCI
none0@pci0:2:0: class=0x030000 card=0x01d41028 chip=0x27a28086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    class    = display
    subclass = VGA
none1@pci0:2:1: class=0x038000 card=0x01d41028 chip=0x27a68086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    class    = display
none2@pci0:27:0:        class=0x040300 card=0x01d41028 chip=0x27d88086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) High Definition Audio'
    class    = multimedia
pcib1@pci0:28:0:        class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x01 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
pcib2@pci0:28:1:        class=0x060400 card=0x00000040 chip=0x27d28086 rev=0x01 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:        class=0x0c0300 card=0x01d41028 chip=0x27c88086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:        class=0x0c0300 card=0x01d41028 chip=0x27c98086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:        class=0x0c0300 card=0x01d41028 chip=0x27ca8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
uhci3@pci0:29:3:        class=0x0c0300 card=0x01d41028 chip=0x27cb8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
ehci0@pci0:29:7:        class=0x0c0320 card=0x01d41028 chip=0x27cc8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB
pcib3@pci0:30:0:        class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe1 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:        class=0x060100 card=0x01d41028 chip=0x27b98086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801GBM (ICH7-M) LPC Interface Controller'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:2:      class=0x010180 card=0x01d41028 chip=0x27c48086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller'
    class    = mass storage
    subclass = ATA
none3@pci0:31:3:        class=0x0c0500 card=0x01d41028 chip=0x27da8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) SMBus Controller'
    class    = serial bus
    subclass = SMBus
none4@pci12:0:0:        class=0x028000 card=0x10208086 chip=0x42228086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    class    = network
bfe0@pci2:0:0:  class=0x020000 card=0x01d41028 chip=0x170c14e4 rev=0x02 hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM440x 100Base-TX Fast Ethernet'
    class    = network
    subclass = ethernet
cbb0@pci2:1:0:  class=0x060700 card=0x01d41028 chip=0x71351217 rev=0x21 hdr=0x02
    vendor   = 'O2 Micro Inc'
    class    = bridge
    subclass = PCI-CardBus
fwohci0@pci2:1:4:       class=0x0c0010 card=0x01d41028 chip=0x00f71217 rev=0x02 hdr=0x00
    vendor   = 'O2 Micro Inc'
    class    = serial bus
    subclass = FireWire
Code:
$ sudo lspci
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
02:01.0 CardBus bridge: O2 Micro, Inc. Unknown device 7135 (rev 21)
02:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Unknown device 00f7 (rev 02)
0c:00.0 Network controller: Intel Corporation Unknown device 4222 (rev 02)
thanks a lot guys.sory i'm just new on compiling kernel. i just shift from linux to freebsd. it seem bsd's are the best and stable.

more power bsd's

janskey
 
Old 07-13-2006, 09:33 AM   #2
cnjohnson
Member
 
Registered: Nov 2002
Location: Nashville
Distribution: FreeBSD, Linux, OS-X
Posts: 544

Rep: Reputation: 30
Is this the output after you rebuilt your kernel, or is this your output before you rebuilt your kernel?

If it is after, then please post the kernelconf file that you used.

Cheers--
Charles
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Old P133 Dell Latitude hardware & install help bigmetalrabbit Linux - Laptop and Netbook 10 02-24-2006 05:13 PM
Problems with screen configuration on Dell Latitude Ls ABurchIV Linux - Laptop and Netbook 8 12-07-2005 08:16 AM
Dell Latitude D500 screen problem heavymetal Fedora 1 08-02-2005 10:51 AM
Dell Latitude D600 strech problem koenig Linux - Laptop and Netbook 0 10-14-2004 07:48 AM
Dell Latitude D800, eth0 problem sadeer Red Hat 1 03-01-2004 04:25 AM

LinuxQuestions.org > Forums > Other *NIX Forums > *BSD

All times are GMT -5. The time now is 12:31 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration