X.Org failed to load after Ubuntu 10.5 install
I recently installed Ubuntu 10.5. The install appeared to go smoothly, but on booting the first time X.Org failed to start. I can get to a terminal and everything appears to be in order except X. Here is the error I get when X.Org attempts to start:
Code:
xauth: creating new authority file /root/.serverauth.7416 P4 3.6 GHz 1 GB RAM ATI X800 PRO 256MB Viewsonic A90f+ Monitor I am not a linux newbie, nor by any stretch of the imagination am I an expert. Anyone have any ideas where to start with this problem. |
You're dropped to a shell, right? Then there's hope... ;)
"No screens found" might simply mean that your screen hasn't been recognized, though obviously, it's there (you're reading and posting its contents here, after all). So, you might want to reconfigure X to be able to work with your setup: Code:
$ sudo dpkg-reconfigure xserver-xorg |
try this:
first install midnight commander (my favorite) in the console type: sudo apt-get install mc then type: sudo mc use midnight commander to navigate to the /etc/X11 directory highlight the xorg.conf file and press F4 look for a line that says somthing like this Section "Device" Identifier "Primary" Driver "i810" VideoRam 131072 # Insert Clocks lines here if appropriate EndSection (it won't look exactly like this) change the driver value to "vesa" so that it looks like this Section "Device" Identifier "Primary" Driver "vesa" VideoRam 131072 # Insert Clocks lines here if appropriate EndSection and press F2 to save and F10 twice for the exit menu then reboot your computer if the gui starts working you might want to do some research and find what driver your card needs vesa is a generic driver |
Ok, I was able to change to the default vesa driver. X loads up fine. I guess my next task is to get the ATI driver from the web. Thanks for the help guys. Hopefully, I will be able to take it from here.
|
All times are GMT -5. The time now is 08:22 AM. |