[17179570.712000] 0000:01:09.0: ttyS4 at I/O 0x9400 (irq = 177) is a 16550A
[17179570.712000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.712000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.712000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.712000] mice: PS/2 mouse device common for all mice
[17179570.712000] EISA: Probing bus 0 at eisa.0
[17179570.712000] Cannot allocate resource for EISA slot 4
[17179570.712000] Cannot allocate resource for EISA slot 5
[17179570.712000] EISA: Detected 0 cards.
[17179570.712000] NET: Registered protocol family 2
[17179570.740000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179570.752000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.752000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
[17179570.756000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[17179570.756000] TCP: Hash tables configured (established 262144 bind 65536)
[17179570.756000] TCP reno registered
[17179570.756000] TCP bic registered
[17179570.756000] NET: Registered protocol family 1
[17179570.756000] NET: Registered protocol family 8
[17179570.756000] NET: Registered protocol family 20
[17179570.756000] Using IPI No-Shortcut mode
[17179570.756000] ACPI wakeup devices:
[17179570.756000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
[17179570.756000] ACPI: (supports S0 S1 S4 S5)
[17179570.756000] Freeing unused kernel memory: 332k freed
[17179570.800000] vga16fb: initializing
[17179570.800000] vga16fb: mapped to 0xc00a0000
[17179570.932000] Console: switching to colour frame buffer device 80x25
[17179570.932000] fb0: VGA16 VGA frame buffer device
[17179572.008000] Capability LSM initialized
[17179572.732000] SCSI subsystem initialized
[17179572.732000] ACPI: bus type scsi registered
[17179572.732000] libata version 1.20 loaded.
[17179572.732000] sata_sil 0000:01:0b.0: version 0.9
[17179572.732000] **** SET: Misaligned resource pointer: df870b62 Type 07 Len 0
[17179572.732000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179572.732000] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 185
[17179572.732000] ata1: SATA max UDMA/100 cmd 0xF885E080 ctl 0xF885E08A bmdma 0xF885E000 irq 185
[17179572.736000] ata2: SATA max UDMA/100 cmd 0xF885E0C0 ctl 0xF885E0CA bmdma 0xF885E008 irq 185
[17179572.940000] ata1: no device found (phy stat 00000000)
[17179572.940000] scsi0 : sata_sil
[17179573.320000] ata2: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f 93:0000
[17179573.320000] ata2: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
[17179573.320000] sata_get_dev_handle: SATA dev addr=0xb0000, handle=0x00000000
[17179573.320000] ata2: dev 0 configured for UDMA/100
[17179573.320000] sata_get_dev_handle: SATA dev addr=0xb0000, handle=0x00000000
[17179573.320000] scsi1 : sata_sil
[17179573.320000] Vendor: ATA Model: ST380817AS Rev: 3.42
[17179573.320000] Type: Direct-Access ANSI SCSI revision: 05
[17179573.324000] Driver 'sd' needs updating - please use bus_type methods
[17179573.324000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179573.324000] SCSI device sda: drive cache: write back
[17179573.328000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179573.328000] SCSI device sda: drive cache: write back
[17179573.328000] sda: sda1 sda2 < sda5 >
[17179573.352000] sd 1:0:0:0: Attached scsi disk sda
[17179573.520000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[17179573.520000] NFORCE2: chipset revision 162
[17179573.520000] NFORCE2: not 100% native mode: will probe irqs later
[17179573.520000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[17179573.520000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda
MA, hdb
MA
[17179573.520000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc
MA, hdd
MA
[17179573.520000] Probing IDE interface ide0...
[17179574.260000] hda: PLEXTOR CD-R PX-W5224A, ATAPI CD/DVD-ROM drive
[17179575.044000] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
[17179575.104000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.108000] Probing IDE interface ide1...
[17179575.692000] hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.692000] Uniform CD-ROM driver Revision: 3.20
[17179575.696000] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179575.780000] usbcore: registered new driver usbfs
[17179575.780000] usbcore: registered new driver hub
[17179575.780000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179575.780000] **** SET: Misaligned resource pointer: df8707a2 Type 07 Len 0
[17179575.780000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[17179575.780000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 193
[17179575.780000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179575.780000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179575.812000] ieee1394: Initialized config rom entry `ip1394'
[17179575.824000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[17179575.824000] ohci_hcd 0000:00:02.0: irq 193, io mem 0xe9087000
[17179575.884000] hub 1-0:1.0: USB hub found
[17179575.884000] hub 1-0:1.0: 3 ports detected
[17179575.988000] **** SET: Misaligned resource pointer: df8704a2 Type 07 Len 0
[17179575.992000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[17179575.992000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 201
[17179575.992000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179575.992000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179576.020000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[17179576.020000] ohci_hcd 0000:00:02.1: irq 201, io mem 0xe9082000
[17179576.080000] hub 2-0:1.0: USB hub found
[17179576.080000] hub 2-0:1.0: 3 ports detected
[17179576.188000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[17179576.188000] **** SET: Misaligned resource pointer: df870322 Type 07 Len 0
[17179576.188000] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20
[17179576.188000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 20 (level, high) -> IRQ 209
[17179576.188000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[17179576.240000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] MMIO=[e9084000-e90847ff] Max Packet=[2048]
[17179576.244000] **** SET: Misaligned resource pointer: df870322 Type 07 Len 0
[17179576.244000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[17179576.244000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 193
[17179576.244000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179576.244000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179576.244000] ehci_hcd 0000:00:02.2: debug port 1
[17179576.244000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179576.244000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[17179576.244000] ehci_hcd 0000:00:02.2: irq 193, io mem 0xe9083000
[17179576.244000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.244000] hub 3-0:1.0: USB hub found
[17179576.244000] hub 3-0:1.0: 6 ports detected
[17179576.376000] Probing IDE interface ide1...
[17179576.960000] Attempting manual resume
[17179576.992000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.008000] kjournald starting. Commit interval 5 seconds
[17179577.356000] ohci1394: fw-host0: SelfID received outside of bus reset sequence
[17179577.628000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800005806b3]
[17179583.144000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[17179584.228000] Linux agpgart interface v0.101 (c) Dave Jones
[17179584.228000] agpgart: Detected NVIDIA nForce2 chipset
[17179584.232000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179584.368000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[17179584.368000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[17179584.444000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[17179584.444000] **** SET: Misaligned resource pointer: dfde4ac2 Type 07 Len 0
[17179584.444000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[17179584.444000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 21 (level, high) -> IRQ 201
[17179584.444000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[17179584.504000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179584.788000] input: PC Speaker as /class/input/input1
[17179584.964000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[17179584.964000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179585.020000] **** SET: Misaligned resource pointer: dfde4702 Type 07 Len 0
[17179585.020000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[17179585.020000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 (level, high) -> IRQ 209
[17179585.020000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179585.160000] Floppy drive(s): fd0 is 1.44M
[17179585.180000] FDC 0 is a post-1991 82077
[17179585.292000] parport: PnPBIOS parport detected.
[17179585.292000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179585.344000] intel8x0_measure_ac97_clock: measured 56593 usecs
[17179585.344000] intel8x0: clocking to 48000
[17179585.364000] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 177
[17179585.364000] skge 1.3 addr 0xe8000000 irq 177 chip Yukon-Lite rev 7
[17179585.364000] skge eth1: addr 00:0e:a6:54:54:fb
[17179585.584000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[17179585.784000] ts: Compaq touchscreen protocol output
[17179586.136000] lp0: using parport0 (interrupt-driven).
[17179586.180000] skge eth1: enabling interface
[17179586.196000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[17179586.196000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179586.196000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179586.284000] Adding 3036244k swap on /dev/sda5. Priority:-1 extents:1 across:3036244k
[17179586.788000] EXT3 FS on sda1, internal journal
[17179587.264000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179587.264000] md: bitmap version 4.39
[17179587.316000] NET: Registered protocol family 17
[17179588.132000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel@redhat.com
[17179588.424000] cdrom: open failed.
[17179588.856000] cdrom: open failed.
[17179588.864000] cdrom: open failed.
[17179589.920000] NET: Registered protocol family 10
[17179589.920000] lo: Disabled Privacy Extensions
[17179589.920000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[17179589.920000] IPv6 over IPv4 tunneling driver
[17179594.336000] ACPI: Power Button (FF) [PWRF]
[17179594.336000] ACPI: Power Button (CM) [PWRB]
[17179594.424000] ibm_acpi: ec object not found
[17179594.448000] pcc_acpi: loading...
[17179596.632000] ppdev: user-space parallel port driver
[17179596.984000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179596.984000] apm: overridden by ACPI.
[17179599.560000] Bluetooth: Core ver 2.8
[17179599.560000] NET: Registered protocol family 31
[17179599.560000] Bluetooth: HCI device and connection manager initialized
[17179599.560000] Bluetooth: HCI socket layer initialized
[17179599.584000] Bluetooth: L2CAP ver 2.8
[17179599.584000] Bluetooth: L2CAP socket layer initialized
[17179599.600000] Bluetooth: RFCOMM socket layer initialized
[17179599.600000] Bluetooth: RFCOMM TTY layer initialized
[17179599.600000] Bluetooth: RFCOMM ver 1.7
[17179600.568000] eth0: no IPv6 routers present
[17179601.892000] [drm] Initialized drm 1.0.1 20051102
[17179601.900000] **** SET: Misaligned resource pointer: f76449e2 Type 07 Len 0
[17179601.900000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179601.900000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 217
[17179601.900000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[17179602.280000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179602.280000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179602.284000] agpgart: Putting AGP V3 device at 0000:03:00.0 into 4x mode
[17179602.612000] [drm] Setting GART location based on new memory map
[17179602.612000] [drm] Loading R200 Microcode
[17179602.616000] [drm] writeback test succeeded in 1 usecs
[17180996.196000] hdb: irq timeout: status=0xd0 { Busy }
[17180996.196000] ide: failed opcode was: unknown
[17180996.196000] hdb: DMA disabled
[17180996.292000] hdb: ATAPI reset complete
[17181010.008000] UDF-fs: No partition found (1)
[17181010.392000] UDF-fs: No partition found (1)
[17181010.620000] Unable to identify CD-ROM format.
[17181010.816000] Unable to identify CD-ROM format.
[17181010.892000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17181011.152000] FAT: bogus number of reserved sectors
[17181011.152000] VFS: Can't find a valid FAT filesystem on dev hdb.
[17181011.208000] FAT: bogus number of reserved sectors
[17181011.208000] VFS: Can't find a valid FAT filesystem on dev hdb.
[17181011.228000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17181011.280000] NTFS-fs warning (device hdb): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
[17181011.280000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size.
[17181011.352000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size.
[17181011.584000] HFS+-fs: unable to find HFS+ superblock
[17181011.704000] HFS+-fs: unable to find HFS+ superblock
[17181011.768000] VFS: Can't find a HFS filesystem on dev hdb.
[17181011.824000] VFS: Can't find a HFS filesystem on dev hdb.
[17181012.152000] VFS: Can't find ext3 filesystem on dev hdb.
[17181012.212000] VFS: Can't find ext3 filesystem on dev hdb.
[17181012.280000] VFS: Can't find an ext2 filesystem on dev hdb.
[17181012.340000] VFS: Can't find an ext2 filesystem on dev hdb.
[17181012.416000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb
[17181012.624000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb
[17181012.728000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[17181012.728000] SGI XFS Quota Management subsystem
[17181012.836000] XFS: bad magic number
[17181012.840000] XFS: SB validate failed
[17181012.900000] XFS: bad magic number
[17181012.900000] XFS: SB validate failed
[17181012.924000] JFS: nTxBlock = 8083, nTxLock = 64665
[17181054.852000] UDF-fs: No partition found (1)
[17181055.220000] UDF-fs: No partition found (1)
[17181055.412000] Unable to identify CD-ROM format.
[17181055.612000] Unable to identify CD-ROM format.
[17181055.672000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17181055.948000] FAT: bogus number of reserved sectors
[17181055.948000] VFS: Can't find a valid FAT filesystem on dev hdb.
[17181056.004000] FAT: bogus number of reserved sectors
[17181056.008000] VFS: Can't find a valid FAT filesystem on dev hdb.
[17181056.064000] NTFS-fs warning (device hdb): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
[17181056.064000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size.
[17181056.124000] NTFS-fs error (device hdb): ntfs_fill_super(): Device has unsupported hardsect_size.
[17181056.332000] HFS+-fs: unable to find HFS+ superblock
[17181056.396000] HFS+-fs: unable to find HFS+ superblock
[17181056.452000] VFS: Can't find a HFS filesystem on dev hdb.
[17181056.524000] VFS: Can't find a HFS filesystem on dev hdb.
[17181056.844000] VFS: Can't find ext3 filesystem on dev hdb.
[17181056.904000] VFS: Can't find ext3 filesystem on dev hdb.
[17181056.964000] VFS: Can't find an ext2 filesystem on dev hdb.
[17181057.028000] VFS: Can't find an ext2 filesystem on dev hdb.
[17181057.084000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb
[17181057.272000] ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb
[17181057.460000] XFS: bad magic number
[17181057.464000] XFS: SB validate failed
[17181057.524000] XFS: bad magic number
[17181057.524000] XFS: SB validate failed
[17192432.400000] ohci_hcd 0000:00:02.0: wakeup
[17192432.784000] usb 1-2: new full speed USB device using ohci_hcd and address 2
[17192433.100000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[17192433.100000] usbcore: registered new driver usblp
[17192433.100000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17193209.988000] usb 1-2: USB disconnect, address 2
[17193209.988000] drivers/usb/class/usblp.c: usblp0: removed
[17287031.760000] cdrom: open failed.
[17287031.772000] cdrom: open failed.
[17350265.700000] usb 3-2: new high speed USB device using ehci_hcd and address 3
[17350265.832000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
[17350295.396000] ppdev0: registered pardevice
[17350295.444000] ppdev0: unregistered pardevice
[17350297.804000] ppdev0: registered pardevice
[17350297.852000] ppdev0: unregistered pardevice
[17350307.156000] ppdev0: registered pardevice
[17350307.208000] ppdev0: unregistered pardevice
[17350643.260000] usb 3-2: USB disconnect, address 3
[17350643.260000] drivers/usb/class/usblp.c: usblp0: removed
peterhin@GnuLinux02:~$